PURCHASE OF BRAND-NEW WHEEL LOADER AND BRAND-NEW EXCAVATOR FOR USE OF THE OFFICE OF THE PROVINCIAL ENGINEER

1. 1 unit Brand New Wheel Loader Specifications: Engine: Type: water-cooled, 4 cycle Aspiration: turbocharged, aftercooled Number of cylinders: 6 Bore x stroke: 107mm x 124mm 4.21" x 4.88" Piston displacement: 6.69 ltr 408 in³ Governor: all-speed, electronic Horsepower: SAE J1995: gross 127 kW 171 HP ISO 9249/SAE J1349*: Net 125 kW 167 HP Rated RPM: 2000 rpm Fan drive method for radiator cooling: hydraulic Fuel system: direct injection Lubrication system: method: gear pump, force lubrication filter: full-flow type Air cleaner: dry type with double elements and dust evacuator, plus dust indicator *net horsepower at the maximum speed of radiator cooling fan is 117 KW 156 HP Transmission: Type: hydrostatic, 1 pump, 2 motors with speed range select Travel speed (km/h mph): measured with 20.5-25 tires Axles and Final Drives: Drive system: four-wheel drive Front: fixed, semi-floating Rear: center-pin support, semi floating, 24° total oscillation Reduction gear: spiral bevel gear Differential gear: torque proportioning Final reduction gear: planetary gear, single reduction Brakes: Service brakes: hydraulically actuated, wet multiple-disc brakes actuate on four wheels Parking brake: wet, multiple-disc brake on transfer output shaft Emergency brake: parking brake is commonly used Steering System: Type: full-hydraulic power steering Steering angle: 38.5° each direction (40° end stop) Minimum turning radius at the center of outside tire: 5380 mm 17'8" Hydraulic System: - Steering system Hydraulic pump: gear type pump Capacity: 172 ltr/min 45.4 U.S. gal/min at rated rpm Relief valve setting: 20.6 MPa 210 kgf/cm² 2,990 psi - Hydraulic cylinders: Type: double-acting, piston type Number of cylinders: 2 Bore x stroke: 70mm x 453 mm 2.8" x 17.8" - Loader control: Hydraulic pump: gear type pump Capacity: 61 ltr/min 16.1 U.S. gal/min Relief valve setting: 20.6 MPa 210 kgf/cm² 3,000 psi - Hydraulic cylinders: Type: double-acting, piston type - Number of cylinders - bore x stroke: Lift