USCGC WILLIAM TATE DRYDOCK REPAIRS

Replies should be sent by 19 October 2026, 1:00 pm Eastern Starndard Time to: Mr. Iran Walker, Email: Iran.N.Walker@uscg.mil The U.S. Coast Guard is looking for sources which would be interested in performing Drydock Repairs for Coast Guard Cutter WILLIAM TATE (WLM 560) USCGC WILLIAM TATE (WLM 560) HOMEPORT ADDRESS: 1 Washington Avenue, Philadelphia, PA. 19147 ANTICIPATED PERIOD OF PERFORMANCE: April 6, 2027, to August 4, 2027 (Subject to change) PLACE OF PERFORMANCE: Contractor Facility The scope of this acquisition is for the dockside repairs of various work items for USCGC WILLIAM TATE (WLM 560). The work will include, but is not limited to: Fire Prevention Requirements Hull Plating, U/W Body, Inspect Hull Plating, U/W Body, Ultrasonic Testing Hull Plating, Freeboard, Ultrasonic Testing U/W Body, Preserve, 100 percent U/W Body, Preserve, Partial, Condition B Appendages, U/W, Leak Test Chain Lockers, Clean and Tanks, MP Fuel Stowage and Overflow, Clean and Inspect Tanks, MP Fuel Service, Clean and Inspect Tanks, Ballast, Clean and Inspect Tanks, Dirty Oil and Waste, Clean and Inspect Hydraulically Operated Cargo Hatch, Inspect and Service Z-Drive Propulsion Unit, Renew, Drydock Fathometer Transducer, Renew Underwater Speed Log, Transducers, Renew Sea Valves and Waster Pieces, Overhaul or Renew Sea Strainers, Duplex, All Sizes, Overhaul Sea Bay, Clean and Inspect Thruster Unit (General), Overhaul Thruster Unit Bearings, Renew Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test Hydraulic Chain Stoppers, Inspect and Service Hydraulic Crossdeck Winches, Inspect and Service Hydraulic Inhaul Winch, Inspect and Service Mechanical Chain Stoppers, Inspect and Service Anchor Windlass, Inspect and Service Anchor Chains and Ground Tackle, Inspect and Repair Warping Capstan (Aft), Inspect and Service Single Point Davit, Disassemble and Inspect Buoy Crane, Inspect and Service Chain Locker, Preserve, 100 Percent Decks – Exterior (Buoy or Construction Deck), Preser