Tenders from United States

BLM GJFO MASTICATION FY26

NATIONAL INTERAGENCY FIRE CENTER

FY26 GJFO MASTICATION

Fort Bragg Wildland Skid Units

W6QM MICC-FT DRUM

Request For Information (RFI)- USDA Program Complaints Support Process

USDA, OCP-POD-ACQ-MGMT-BRANCH-FTC

The United States Department of Agriculture (USDA) Office of the Assistant Secretary for Civil Rights (OASCR), through the Center for Civil Rights Enforcement (CCRE)is seeking industry information to identify contractors who possess the capabilities to provide services for processing program complaints - intake, investigation, adjudication in accordance with the draft requirements found in the Sources Sought notice. As permitted by FAR Part 10, this is a market research tool being utilized for informational and planning purposes. Your responses will assist the Government in the development of its acquisition strategy for a possible Request for Quote (RFQ), to be issued at a later date, and in determining whether any type of small business set-aside is possible for this procurement or whether full and open competitive procedures should be utilized. If full and open competition is ultimately pursued, responses to this survey may be used to aid in establishing small business subcontracting goals. This notice shall not be construed as a request for quote (RFQ) or as any commitment or obligation on the part of the Government to issue a solicitation. The Government does not intend to award a contract on the basis of this request, so proposals will not be considered. No reimbursement will be made for any costs associated with providing information in response to this sources sought or any follow-up information requests. Response is strictly voluntary - it is not mandatory to submit a response to this notice to participate in any formal RFQ process that may take place in the future. However, it should be noted that information gathered through this notice may significantly influence our acquisition strategy. This survey will close at 5PM ET on May 29, 2026. Survey responses will not be monitored after close. The survey can be found at this link: https://forms.office.com/g/sB5nFxjQKJ Communication outside of this survey such as email or phone calls will not be accepted. Plea

Replace 2 Air Handling Units at the National Agricultural Library

USDA ARS AFM APD

USMS FY26 TD 26152 POLE CAMERA

DEPT OF JUSTICE US MARSHAL SERVICE

**VENDOR PLEASE READ TO BE CONSIDERED RESPONSIVE** Please see the attached RFQ 15M10226QA4700107 for details. To ensure Responsiveness, please follow the directions in Section 1 - SCHEDULE OF SUPPLIES/SERVICES . If proposal is non-responsive, it will not be evaluated. Technical substitutions NOT allowed. **Items are NOT Name Brand specific** If submitting a quote “other than” please submit technical specifications for evaluation INSTRUCTIONS TO OFFERORS Volume 1: Quote on company letterhead Quotes shall be provided on company letterhead, with company name, logo, address, Point of Contact, contact info, etc. Cage Code, must be included. All prospective offerors must be a Commercial and Government Entity (CAGE) code and be registered with the System for Award Management at https://www.sam.gov. The Government seeks additional discounts. Volume 2: SF-1449 The SF-1449 shall be returned signed and with pricing. Fill in required Clauses. PLEASE SUMBIT: Volume 1 - Quote on Letterhead Volume 2 - SF1449 a. Sign Page 1 b. Fill in PRICING on CLINS c. Fill in CLAUSE USMS-0004

FDIC Acquisition System Next Generation (AS-NG)

The Federal Deposit Insurance Corporation (FDIC) is procuring and implementing an enterprise-level acquisition lifecycle solution – Appian’s Government Acquisition Management Suite (GAMS). Specifically, the FDIC will be implementing three GAMS solutions: Contract Writing Award Management Requirements Management

WIRE MARKING MACHINE REPAIRS

FA8571 MAINT CONTRACTING AFSC PZIM

COMBO - SYNOPSIS/SOLICITATION This is a firm fixed acquisition for a one-time supply purchase with incidentals services. This is a sole source for Spectrum Technologies Limited./Cage: U9945 Supply w. incidental service purchase. Contractor shall provide tools, materials, parts, equipment, labor, and travel as necessary to implement the Laser Wire Marker System Panel Upgrade (Model: SA8075) to repair 2 WR assets. Product Service Code: 3611

Portable Ultrasound System with Transducer

NAVAJO AREA INDIAN HEALTH SVC

The Indian Health Service, Shiprock Service Unit is issuing this sources-sought notice (SSN) to identify capable Indian-owned, economic enterprises – large (IEE) or small (ISBEE) – that can provide portable ultrasound system (Sonosite ST) with L12-3 transducer to support ICU/critical care bedside imaging, improve diagnostic capability, and enhance patient care delivery. This request also includes equipment installation and training. Other capable firms are also invited to respond to this SSN. The Contracting Officer will consider responses for Buy Indian Act (25 U.S.C. 47) opportunities first, then for set aside programs under the Small Business Act (41 U.S.C. 3104). The applicable North American Industry Classification System (NAICS) code assigned to this requirement is 339112-Surgical and Medical Instrument Manufacturing with a small business size standard of 1,000 employees. THIS IS NOT A SOLICITATION. Information collected from this notice is purely for market research only and will be used to determine the contracting office’s acquisition strategy including competition, set asides, and locating Indian-owned economic enterprises. Submission of any information in response to this market survey is purely voluntary. The government assumes no financial responsibility for any costs incurred in response to this request for information. In accordance with FAR 4.203-1(b), offerors and quoters must be registered in System for Award Management at SAM.gov, at the time an offer or quotation is submitted and at time of award. Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed services are invited to submit a response to this notice by 4:30 PM MST, May 28, 2026, to Karen James at karen.james@ihs.gov with the subject line “SSN-Portable Ultrasound System with Transducer-SS-SRSU-26-0033.” Your submission must include the following information, at a minimum: 1. Company Profile that includes: UEI, Name and Address, Primary POC

6515--BRAND NAME OR EQUAL Provizio SEM Scanner

NETWORK CONTRACT OFFICE 23 (36C263)

Human Resource Management System - Amendment 0004

OFFICE OF ACQUISITIONS MANAGEMENT

Amenmdment 0004 is required to: Extend the proposal submission due date to June 15, 2026 at 2 PM EST. Proposal Submission Instructions: All potential offerors may submit a new proposal, revise an existing proposal, or withdraw a previously submitted proposal. Any such action must be completed by the revised proposal submission due date of June 15, 2026, no later than 2 PM EST. If no changes to a previously submitted proposal are necessary, no further action is required. For more information on this Request for Proposals (RFP), please navigate to: https://www.house.gov/doing-business-with-the-house and look under "Procurement Opportunities" - Amendment 0003 has been posted to House.gov. Please be sure to click the title of the solicitation to access the amendment. Amenmdment 0003 is required to: Update Attachment J.2 Pricing Matrix. Answer second round of questions asked by the industry (answers can be located in attachment J.4A OAM26007S Answered Questions (Round 2)) Update proposal instructions Proposal Submission Instructions: All potential offerors may submit a new proposal, revise an existing proposal, or withdraw a previously submitted proposal. Any such action must be completed by the revised proposal submission due date of May 28, 2026, no later than 2 PM EST. If no changes to a previously submitted proposal are necessary, no further action is required. For more information on this Request for Proposals (RFP), please navigate to: https://www.house.gov/doing-business-with-the-house and look under "Procurement Opportunities" - Amendment 0003 has been posted to House.gov. Please be sure to click the title of the solicitation to access the amendment. Amenmdment 0002 is required to: Add a second round of questions. Questions regarding the solicitation must be submitted via e-mail no later than April 20, 2026, at 2 PM EST. Add Attachments J.2 Pricing Matrix, J.3 Format for Questions to be answered by government, and J.4 OAM26007S Answered Questions. Answer initial

Flash Point Tester

FA4819 325 CONS PKP

Amendment 2: The purpose of this amendment is to incorporate DFARS Clause 252.225-7013 Duty Free Entry. Amendment 1: The purpose of this amendment is to change the item Model number from Setaflash Series 8 P/N 82000-2 U to Setaflash Series 8 P/N 82100-2 as well as add a revised salient characteristic file to reflect the change. Updates highlighted in Yellow on the revised salient characteristics file (attached). As a result of this change, the offer due date has been extended to 01 Jun 2026 by 12:00pm CDT. The 325th Contracting Squadron at Tyndall AFB, is requesting quotes for Flash Point Tester.. 1. Stadard Form 1449 2. Flah Point Tester - Salient Characteristics Form

Residential Skylights Restoration Services

U.S. EMBASSY MEXICO

The United States Government (USG) requires the services of a contractor to perform works in Government Owned (GO) Residences in Ciudad de Mexico CDMX. This work will be to replace and/or maintain skylights of the house. The current components have completed their life cycle and need to be replaced so the houses can offer a living standards as originally intended. For this reason, the United States Government (USG) requires a professional contractor with general services to supply and install skylights components for the houses within a given time frame. The project is to be executed in 22 GO units. The objective is to dismantle and remove by required means the skylight inside the houses and then to replace each component to include repairs in the surrounding areas of the installation to warranty waterproofing and/or avoid leaks in the skylights, as per the description in this SOW and attached annex, refer to pictures and dimensions for additional information. All materials are to be high quality, low maintenance USG approved, and work is to be executed following best practices. The awarded contractor will perform all the necessary preparation work to include but not limited to temporary partitions or limits to isolate the working area, removal of all debris, and disposal of any resulting item from the site for permanent removal. All works are to be coordinated with Embassy staff as required. As per FAR 36.204, it is anticipated that the range in price of this contract will be: Between $100,000 and $250,000 U.S. dollars. The Contractor shall furnish all managerial, administrative, direct labor personnel, raw materials, and transportation as well as adhere to all safety requirements per local law that are necessary to accomplish all required services. The Government may award the contract based on the initial offer without discussion. The resultant contract will be a single award firm-fixed price contract for III Canadas Skylights Restoration Services. The Government

Pataha Hand NCT

USDA-FS, CSA NORTHWEST 1

The USDA Forest Service (FS), Procurement & Property Services (PPS), is issuing this synopsis as a means of complying with the USDA’s policy in the Contracting Desk Book, SUBPART 413.3—SIMPLIFIED ACQUISITION METHODS, 413.303 Blanket Purchase Agreements (BPAs). The USDA FS intends on awarding a competitive BPA Call Order against multiple award schedule BPAs for Wallowa-Whitman/Umatilla Mechanical and Hand Thinning BPA at Wallowa Whitman National Forest, Umatilla National Forest and any other National Forest within 250 miles of either forest’s boundaries. Parties having an interest in and the resources to support this requirement to cut as much non-seed orchard tree vegetation as possible within the enclosed seed orchards, to reduce fire risk and intensity, and to reduce the spread of undesirable vegetation. All grass, forb, woody vegetation smaller than inch ground line diameter, and woody debris smaller than a 1 inch in maximum diameter shall be mowed, whereas larger diameter shrubs and other obstacles such as rocks or steep slopes may be avoided. Please contact Kevin D. Flores at kevin.flores@usda.gov for additional information regarding the requirement. The applicable North American Industry Classification System (NAICS) code assigned to this acquisition is 115310 Forestry Services. There is not a solicitation. This synopsis notification of intent to award a BPA Call order does not constitute a request for proposals; submission of any information in response to this notification is purely voluntary; the government assumes no financial responsibility for any costs incurred.

United States Air Force Airsave Survival Vest and Accessories

DLA TROOP SUPPORT

A. The Defense Logistics Agency (DLA) – Troop Support is issuing this pre-solicitation notice for the manufacture and delivery of the United States Air Force (USAF) Airsave Survival Vest and Accessories. All items shall be manufactured in strict accordance with Purchase Description (PD) WNUV 12-03D dated 7 February 2025, which supersedes PD WNUV 12-03C dated 21 September 2023, and includes all interim changes and applicable drawings and patterns. The forthcoming Request for Proposal (RFP) will be issued as an Unrestricted procurement under NAICS code 315210, with a Small Business Size Standard of 750 employees. The award made from this solicitation will result in a long-term, Firm-Fixed Price (FFP), Indefinite Delivery, Indefinite Quantity (IDIQ) contract consisting of a four-year period with tiered pricing structured across four (4) 12-month ordering periods. Required items: 1. USAF Airsave Survival Vest / NSN: 8415-01-612-6331 Guaranteed minimum quantity: 800 each Annual estimated quantity: 1,000 each Maximum quantity: 6,800 each 2. Horizontal Mounting Panel / NSN: 8415-01-612-6332 Guaranteed minimum quantity: 800 each Annual estimated quantity: 1,000 each Maximum quantity: 6,800 each 3. Expansion Panel (two sizes) / NSN: 8415-01-612-6327 (small), 8415-01-612-6330 (large) Guaranteed minimum quantity: 500 each (combined for both sizes) Annual estimated quantity: 700 each (combined for both sizes) Maximum quantity: 3,400 each (combined for both sizes) 4. General Pocket Assembly (two sizes) / NSN: 8415-01-612-6326 (small), 8415-01-612-6329 (large) Guaranteed minimum quantity: 1,200 each (combined for both sizes) Annual estimated quantity: 1,500 each (combined for both sizes) Maximum quantity: 7,200 each (combined for both sizes) 5. Radio Pocket Assembly / NSN: 8415-01-612-6336 Guaranteed minimum quantity: 900 each Annual estimated quantity: 900 each Maximum quantity: 4,500 each 6. Crew Regulator Unit/Joint Helmet Mounted Cueing System (CRU/JHMCS) Attachment / NSN: 84

CIRCUIT CARD ASSEMBLY

SFLC PROCUREMENT BRANCH 1(00080)

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: 5998-12-356-6258 P/N: X00018237 CIRCUIT CARD ASSEMBLY PLUG IN BOARD CIRCUIT CARD AIB2-02, COMPONENT OF PANEL, SYSTEM ENGINE MONITORING. INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 41, INITIALLY WRAPPED IN ELECTROSTATIC DISCHARGE PROTECTIVE MATERIAL CONFORMING TO MIL-PRF-81705E, TYPE III. EACH ITEM SHALL THEN BE PACKAGED IN A FAST PACK CONTAINER CONFORMING TO PPP-B-1672E, TYPE II, STYLE D. (ELECTRONICS-SENSITIVE TO ESD) OR SIMILAR PACKAGING TO THIS REQUIREMENT. ADVISE THE CONTRACTING OFFICER IF SUBSTITUTE PACKAGING IS BEING UTLIZED. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY ALL ITEMS ARE INSPECTED WHEN DELIVERED TO THE COAST GUARD WAREHOUSE. FAILURE TO MEET THE REQUIREMENTS FOR PACKAGING, PACKING, MARKING (PP&M) AND BAR-CODING WILL RESULT IN THE ITEM(S) BEING REJECTED AND POSSIBLY RETURNED TO THE VENDOR. THIS WILL DELAY PAYMENT. ANY QUESTIONS CONCERNING THE PP&M REQUIREMENTS OR BAR-CODING SHOULD BE ADDRESSED WITH THE CONTRACTING OFFICER PRIOR TO CONTRACT AWARD. MFG: ROLLS-ROYCE SOLUTIONS GMBH QTY: 10 EA *****STANDARD COMMERCIAL PACKAGING IS UNACCEPTABLE, IF YOU CANNOT MEET THE COAST GUARDS PACKAGING REQUIREMENTS YOUR QUOTE WILL NOT BE ACCEPTED. ***** Brand Name part is mandatory to be considered for award, offers of “equal” products must meet the salient physical, functional, or performance characteristic specified in this solicitation and USCG will determine if alternate part is acceptable. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2025-05 (Oct 1, 2025) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested, and a written solicitation will not be issued. The NAICS code for

REQUEST FOR INFORMATION RFI CW001-26

FEDERAL PRISON INDUSTRIES, INC.

THIS NOTICE IS BEING POSTED AS A REQUEST FOR INFORMATION RFI CW001-26

Linen and Laundry Service ICO Memphis VAMC

249-NETWORK CONTRACT OFFICE 9 (36C249)

Linen and Laundry Service for for Memphis VA Medical Center to Ability One Contractor.

Conlon Creek Culvert Removal & Restoration, GOGA

PWR GOGA(86000)

CONLON CREEK CULVERT REMOVAL & RESTORATION, GOLDEN GATE NATIONAL RECREATION AREA HOW TO ACCESS SOLICITATION DOCUMENTS: The full solicitation package (Standard Form 1442 and all associated attachments) is available for download from the Attachments section on this page. You can download each attachment individually or download all attachments as a zip file. Refer to the provisions and clauses and other attachments for additional information about this requirement and instructions on how to submit a proposal. SITE VISIT INFORMATION: A site visit is scheduled. Information is located in Section L of the solicitation. RSVP required. While not mandatory, offerors are urged and expected to inspect the site where the work will be performed. See Section L of the solicitation for detailed information about the site visit, including meeting location. QUESTIONS? Submit any questions regarding this solicitation in writing to Contract Specialist, Quinn Rankin, at Quinn_Rankin@ios.doi.gov and include solicitation number 140P8626R0003 in the subject line of the email.

Rose Springs Hand NCT

USDA-FS, CSA NORTHWEST 1

The USDA Forest Service (FS), Procurement & Property Services (PPS), is issuing this synopsis as a means of complying with the USDA’s policy in the Contracting Desk Book, SUBPART 413.3—SIMPLIFIED ACQUISITION METHODS, 413.303 Blanket Purchase Agreements (BPAs). The USDA FS intends on awarding a competitive BPA Call Order against multiple award schedule BPAs for Wallowa-Whitman/Umatilla Mechanical and Hand Thinning BPA at Wallowa Whitman National Forest, Umatilla National Forest and any other National Forest within 250 miles of either forest’s boundaries. Parties having an interest in and the resources to support this requirement to cut as much non-seed orchard tree vegetation as possible within the enclosed seed orchards, to reduce fire risk and intensity, and to reduce the spread of undesirable vegetation. All grass, forb, woody vegetation smaller than inch ground line diameter, and woody debris smaller than a 1 inch in maximum diameter shall be mowed, whereas larger diameter shrubs and other obstacles such as rocks or steep slopes may be avoided. Please contact Kevin D. Flores at kevin.flores@usda.gov for additional information regarding the requirement. The applicable North American Industry Classification System (NAICS) code assigned to this acquisition is 115310 Forestry Services. There is not a solicitation. This synopsis notification of intent to award a BPA Call order does not constitute a request for proposals; submission of any information in response to this notification is purely voluntary; the government assumes no financial responsibility for any costs incurred.

D.L. Billmaier Tow Winch Installation

W072 ENDIST DETROIT

***Amendment 0003*** D.L. Billmaier Tow Winch Installation. Amendment 0003 extends response deadline from May 27, 2026 to no later than 2:00 p.m. EDT on June 4, 2026. ***Amendment 0002***D.L. Billmaier Tow Winch Installation Combined Synopsis/Solicitation - The U.S. Army Corps of Engineers (USACE) Detroit District has a requirement for a contract for the D.L. Billmaier Tow Winch Installation located in Duluth, MN. (i) This is a combined synopsis/solicitation for a commercial service prepared in accordance with FAR Part 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation is being provided.(ii) The solicitation number is W911XK26QA010. The solicitation is being issued as a Request for Quote (RFQ).(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-04 dated June 11, 2025, and Defense Federal Acquisition Regulation Supplement (DFARS) Change Notice (DCN) dated January 17, 2025. This action is subject to any changes to the Federal Acquisition Regulation (FAR) and the DFARS prior to establishment of this date.(iv) This procurement is a 100% small business set-aside. It is being procured as a Firm-Fixed Price (FFP) contract under FAR Part 12, Acquisition of Commercial Products and Commercial Services and FAR Part 13, Simplified Acquisition Procedures. The associated NAICS code is 336611 ? Ship Building and Repairing, small business size standard of 1,300 employees. The PSC code is N020 ? Installation of Equipment-Ship and Marine Equipment.(v) Contract supply by line-item number, item, quantities, and unit of measure are within the pricing schedule contained in the solicitation. (vi) This contract involves the installation of a tow winch aboard the D.L. Billmaier Tugboat at the USACE Vessel Yard in Duluth, MN. The tow winch is in possession of the Government and will b

DESIGN-BUILD (DB), P-1476U NEW FIRE APPARATUS BAY CHEATHAM ANNEX, NAVAL WEAPONS STATION YORKTOWN, VIRGINIA

NAVFACSYSCOM MID-ATLANTIC

Please note: this solicitation and all applicable attachments are restricted to MACC holders (N4008524D0030-38, 0069) under the Design-Build (DB)/Design-Bid-Build (DBB), Indefinite Delivery/Indefinite Quantity (ID/IQ) Multiple Award Construction Contract (MACC) General Construction in the Hampton Roads, Virginia Area of Responsibility.

Residential Façade Restoration Services

U.S. EMBASSY MEXICO

The United States Government (USG) requires the services of a contractor to perform works in Government Owned (GO) Residences in Ciudad de Mexico CDMX. This work will be to repair, and/or maintain main house’s fa ade. This work includes repair of the house's finish in the fa ade which is cement mortar w/vinylic paint. The exterior finish of the houses needs to be repaired, so each house can meet the HOA guidelines while also offering a living standard as originally intended. For this reason, the United States Government (USG) requires a professional contractor with general services to supply and install the listed components within a given time frame. The project is to be executed in 22 GO units. The objective is to repair, and/or maintain the houses outer shell of the two story structure to include repairs needed in the wall finishes before application of paint to the front, back and patios/lateral fa ade, also included are the metallic grilles in the windows/doors as per described in this SOW and attached annex, refer to pictures and dimensions for additional information. All materials are to be high quality, low maintenance USG approved, and work is to be executed following best practices. The awarded contractor will perform all the necessary preparation work to include but not limited to temporary partitions or limits to isolate the working area, removal of all debris and disposal of any resulting item from the site for permanent removal. All works are to be coordinated with Embassy staff as required. As per FAR 36.204, it is anticipated that the range in price of this contract will be: Between $100,000 and $250,000 U.S. dollars. The Government may award the contract based on the initial offer without discussion. The resultant contract will be a single award firm-fixed price contract for III Canadas Fa ade Restoration Services. The Government is planning a Site Visit and Pre-Proposal Conference on May 29, 2026. The process to confirm time and location will be st

CY27 Propeller Component Improvement Program (CIP)

NAVAL AIR WARFARE CENTER AIR DIV

The Naval Air Warfare Center, Aircraft Division (NAWCAD) Contracts Department, Patuxent River, MD in support of NAVAIR 4.4, Propulsion and Power, intends to negotiate an order under Basic Ordering Agreement N00019-24-G-0007 on a sole source basis with Hamilton Sundstrand, One Hamilton Road, Windsor Locks, CT 06096, in support of the T56 Propeller Component Improvement Program (CIP). The order includes work scope found under 2024 Engineering Project Descriptions (EPDs): The Propeller CIP allows the Navy to increase the safety, reliability, and maintainability and reduce the cost of operating its propeller systems. The Navy requires technical testing, integration, maintenance, repair, logistics, hardware, and engineering support for the propellers that power Navy E-2, C-2, P-3, and C-130 aircraft. The Government intends to procure under the authority of 10 U.S.C. 2304(c)(1), FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. Hamilton is uniquely qualified to provide the complete range of program support required by the USN, USMC, and FMS fleets. Hamilton is also the only known firm to possess the technical data, drawings, and specifications necessary to fulfill the Government requirements. Given that Hamilton is the original designer and prime manufacturer and their continued involvement in the past and recent propeller system improvements, Hamilton has all the design intent information, original drawings, and most recent design changes, which are required to avoid undesirable interactions between existing and redesigned hardware. Hamilton also has immediate access to tooling, special equipment and test facilities as well as sub-vendors similar tooling and facilities. These are required to verify, design, and test new proposed engineering solutions. Privately developed data, materials, and design processes are the sole property of Hamilton. These provide Hamilton with the unique ability to identify and correct