Tenders

36--GENERATOR,OXYGEN-NITROGEN

DLA AVIATION

81--CAN,HERMETIC SEALING

DLA TROOP SUPPORT

48--VALVE,RELIEF,PRESSU

DLA LAND AND MARITIME

53--MOUNT,RESILIENT,WEAPON SYSTEM

DLA AVIATION

31--BEARING,ROLLER,NEED

DLA AVIATION

61--CABLE ASSEMBLY,POWE

DLA LAND AND MARITIME

53--NUT,SELF-LOCKING,HEXAGON

DLA AVIATION

66--SENSOR,AMBIENT TEMPERATURE

DLA AVIATION

58--INDICATOR,OPERATION

DLA AVIATION

67--CASE,PHOTOGRAPHIC EQUIPMENT

DLA TROOP SUPPORT

42--FACEPIECE,BREATHING EQUIPMENT

DLA TROOP SUPPORT

UT NP ARCH 100(2) Bridges on Delicate Arch Road

6982AF CENTRAL FEDERAL LANDS DIVISI

PROJECT NUMBER: UT NP ARCH 100(2) PROJECT NAME: Bridges on Delicate Arch Road PROJECT DESCRIPTION: Delicate Arch Road (DAR) is within Arches National Park (Park) and provides access to Delicate Arch. DAR is a functional class 1 roadway (Principal Park Road) and is heavily traveled by visitors and often congested during periods with moderate-to-high levels of visitation. DAR crosses three low-gradient ephemeral washes (Salt Valley Wash, Salt Wash, and Winter Camp Wash) near their confluence in the Salt Wash Basin downstream of Wolfe Ranch. Culverts installed during original road construction in the mid-1990s and during subsequent upgrades are inadequate to allow unobstructed stream flow and sediment transport downstream. This existing condition produces flooding and sediment deposition, which creates unsafe conditions for visitors, triggers road closures, potentially strands Park visitors, diminishes visitor experience of the Park, and generates high operational costs associated with traffic management, visitor safety, and cleanup operations. SCOPE OF THE WORK: This project will be designated as Reconstruction (4R) with one segment of restoration (3R), and will design and construct 100’ span concrete bridges at the Salt Valley Wash, Salt Wash, and Winter Camp Wash. The DA roadway profile at each Wash will be raised to accommodate a 10-year design frequency and allow a medium-sized excavator to access each wash. The DA will be realigned at the Salt Valley wash, moving the roadway and new bridge location to the north of the existing roadway and drainage crossing. The remaining 3R sections of the roadway will receive full depth reclamation (FDR) or removal of pavement, including all parking areas, followed by a 4-inch pavement overlay. PRINCIPAL WORK ITEMS: 20420-0000 Embankment Construction: 10,000 CUYD 25101-0300 Placed Riprap, Class 3: 1,725 CUYD 30202-2000 Roadway Aggregate, Method 2: 5,140 TON 40101-5600 Asphalt Concrete Pavement, Gyratory Mix, 1/2-Inch or 3/4-Inch

Z--Bowling Center Maintenance

IBC ACQ SVCS DIRECTORATE (00004)

The Contractor will provide weekly preventive maintenance and repairs for all bowling equipment at AFRH'G. All work must follow manufacturer specifications, including corrections required after annual lane inspections within 24 hours. The Contractor must manage and use Government¿provided repair parts first, coordinating inventory and purchasing with the COR. On¿site service includes routine maintenance, special event support, and scheduled training. The Contractor will oversee scheduling, records, quality control, and required reporting while complying with AFRH¿G business hours and safety guidelines

Security Assessment and Authorization Support Services

693JJ3 ACQUISITION AND GRANTS MGT

Cybersecurity Services

United States Marine Corps Communication Systems (UCS) Integrated Product Team (IPT) Support

NIWC ATLANTIC

***This Sources Sought Notice is for SEAPORT NxG SMALL BUSINESS MAC HOLDERS ONLY. No other responses will be considered. Large Businesses need not respond.*** Seaport small business MAC holders will need to register for PIEE accounts in order to receive market survey requests and/or solicitations and submit responses. The Naval Information Warfare Center Atlantic (NIWC Atlantic) is issuing this market survey to determine small business capabilities and solicit information from potential sources to provide systems engineering, technical, software, cybersecurity, management, and logistics support for United States Marine Corps Communication Systems (UCS) Integrated Product Team (IPT) initiatives. Tasking details are included in the draft Performance Work Statement (PWS) posted with this market survey. The anticipated period of performance includes a base year, four (4) one-year option periods, and one (1) six-month option period. NOTE: this requirement has not been vetted through the review process for approval and the attached documents are only DRAFT documents. ***THIS IS NOT AN RFP*** [Revision 0001 (09/25/26) updated Section 5, Points of Contact of the market survey. All other terms and conditions remain the same.][Revision 0002 (09/29/26) updated Section 3 of the market survey and draft PWS (changes highlighted). All other terms and conditions remain the same.]

Brand Name National Stock Numbers: Industry Feedback Request

GSA/FAS/GSS/QSCB, SUPPLY CHAIN MANAGEMENT CONTRACTING DIVISION

GSA's Supply Chain Management Contracting Division is seeking feedback from industry regarding the Brand Name National Stock Numbers (NSNs) published with this notice. The NSNs were established as Brand Name (BN) specific at the point they were created, and therefore the Item Purchase Descriptions (IPDs) are likewise written as BN specific. Supporting information was provided at the point of NSN/IPD creation, however in some cases that information may no longer be relevant (see FAR Part 10), and as Brand Name specific items, GSA is seeking to verify whether the need described by the IPDs can in fact only be met by the one particular manufacturer cited (the manufacturer indicated in the IPD), or whether other manufacturers’ products (or brands) can be offered which can meet the requirement. In order to meet the continued need for these items on behalf of our customers, GSA will seek to add these items to contract, but during the lifecycle of the NSN, we are issuing this notice as a request to industry to provide feedback confirming or countering the requirement as described. Are these manufacturer names and part numbers, as listed in the IPDs, the only manufacturers that will meet the requirement, or are there suitable substitute manufacturer names and part numbers that can be offered to meet the requirement? Please note that supporting information must be provided by industry respondents by filling in accurately and completely, all of the designated columns, for any NSN(s) that you are seeking to comment on. To respond to this feedback request, please complete the attached excel template in the highlighted columns designated for industry feedback, along with supporting documentation for all NSNs where you indicated a viable substitute, and email them to fssi.mro-req@gsa.gov. Note that all literature must contain the NSN indicated on every page of literature submitted so that the NSN association being made is clear. Also the subject line of your email must follow thi

Monaco System Upgrade

FA4407 375 CONS LGC

F-15 Valve, Rotary Select

DLA AVIATION AT OKLAHOMA CITY, OK

CJAG Power Distribution

W7NU USPFO ACTIVITY OH ARNG

NTX Fisher House Housekeeping Service

257-NETWORK CONTRACT OFFICE 17 (36C257)

Fulcrum Bench Press Machine

FLETC GLYNCO PROCUREMENT OFFICE

7210--Beds and Mattresses for Pueblo CLC

NETWORK CONTRACT OFFICE 19 (36C259)

The purpose of this amendment is to answer questions that were received (see below) Q. Can the CLC provide the manufacturer, model numbers, and dimensions of the existing beds and mattresses scheduled for removal and disposal under this solicitation? A. Mattress Dimensions for removal and disposal are listed below: 24 x Styker Go Bed II                                   84x35 w/ mattresses 1 x American Basic Bariatric Bed          89x42 w/ mattress

7210--Beds and Mattresses for Pueblo CLC - RMR VAMC

NETWORK CONTRACT OFFICE 19 (36C259)

Mandrels for the Watervliet Arsenal

W6QK ACC WVA

10 Each - MANDREL ASSEMBLY per Drawing #G5573D REV. A, G5507C Rev. H Applies. Assembly consists of parts: G5571F Rev.D G5572D Rev.B G5574C Rev.B-Item #2 G5579B Rev.C-Item#2 Contractor to mark mandrel assembly and packages per drawing #G5573. Vendor to submit Material Certs, Heat Treat Certs, Finish Certs, Inspection Reports upon delivery. ** Inspection Required**