Tenders

H312--Fire Door Inspection and Repair Service

261-NETWORK CONTRACT OFFICE 21 (36C261)

See Schedule, Performance Work Statement and Attachments and Amendment for details

Q999--Provider Healthcare, LLC 621 I / 36F79727D0001 Effective 10/1/2026 - 9/30/2031

NAC FEDERAL SUPPLY SCHEDULE (36F797)

Howard Medical Carts (VA-26-00064791)

RPO CENTRAL (36C24C)

See attached document: P03 - Final JA Over SAT IAW 6.103-1 - Howard Med Carts BPA – REDACTED.pdf.

Modernization of Scientific and Technical Intelligence (SandTI;) Prototype Effort

FA8604 AFLCMC PZI

The National Air and Space Intelligence Center (NASIC), in collaboration with the National Space Intelligence Center (NSIC), is conducting market research to gauge industry interest and capability to prototype and operationalize a scalable, modern, model-based, and data-centric Scientific and Technical Intelligence (SandTI;) environment. This initiative is being explored under 10 U.S.C. 4022 (Prototype Other Transaction Authority). This notice is issued solely for market research and acquisition planning purposes in accordance with FAR Part 10 and does not constitute a Request for Prototype Proposals (RPP) or a commitment by the Government to issue a formal solicitation or award an agreement.

CO NP BLCA 10(1) South Rim Drive

6982AF CENTRAL FEDERAL LANDS DIVISI

This is a Request for Quote. Plans and specifications are available. PROJECT NUMBER: CO NP BLCA 10(1) PROJECT NAME: South Rim Drive Improvement PROJECT DESCRIPTION: The National Park Service (NPS) has an immediate safety requirement to restore roadside protection along South Rim Drive following damage sustained during last year's wildfire event. The purpose of this project is to remove remaining roadside hazards and install modern, crash-tested safety barriers to restore the corridor to safe operating conditions prior to peak visitor seasons. SCOPE OF THE WORK: The contractor shall provide all labor, materials, equipment, and supervision necessary to execute guardrail removal, site preparation, and installation across twelve (12) distinct locations along South Rim Drive. Principal work elements include, but are not limited to, the following: Selective Boulder Removal & Dispersal: Carefully remove, relocate, or safely set aside existing large boulder barriers at specified curves out of the active road prism/clear zone in accordance with park cultural and aesthetic boundaries. Site Grading & Base Preparation: Execute minor grading, shoulder stabilization, and post-hole excavation at the 12 designated locations to prepare the roadside for barrier placement. Specialized Guardrail Procurement & Installation: Supply and install steel guardrail systems featuring a weathered-look finish and structural treatments (e.g., Natina stain coatings). Traffic Control & Sequencing: Provide comprehensive traffic control, including active one-lane closures and flagging operations, to accommodate construction activities while maintaining safety for park staff and public visitors. Prospective bidders are advised that the specialized weathered-look guardrail steel and required aesthetic coatings carry extended procurement windows (up to an 8-week lead time plus required material curing periods). Contract duration and ordering timelines are structured to accommodate this supply chain restr

Notice of Award, Honeywell International fire alarm maintenance services

FA2550 50 CONS PKP

Award of contract modification for the addition of five priced option periods of one year each for fire alarm system maintenance.

TIMKEN BEARINGS FOR TACCHI LATHE FOR WATERVLIET ARSENAL

W6QK ACC WVA

2 EA: TAPERED ROLLER BEARING FULL ASSEMBLY, TS (TAPERED SINGLE) IMPERIAL SERIES, LIGHTER DUTY, 23.00 INCH BORE DIAMETER, 27.00 INCH OUTSIDE DIAMETER, 1.9375 INCH ASSEMBLY WIDTH, OPEN CLOSURE TYPE. CONSISTS OF CONE LL778149 AND CUP LL778110. MANF: THE TIMKEN COMPANY PART NUMBER: LL778149-90012. INSPECTION REQUIRED.

CURTAIN CLEANING AND INSTALLATION

COMMANDER

This is a sources sought announcement only, NOT a solicitation. This RFI serves as market research to determine potential small business sources to procure wrapping services for curtain cleaning and installation services. This notice does not constitute a promise to issue a solicitation in the future. Furthermore, we are not, at this time, seeknig quotations; Therefore, DO NOT request a copy of a solicitation or submit a quotation as a result of this notice. RESPONSE INFORMATION: Responses to this Sources Sought Notice must be received no later than 12:00 PM EST, on Wednesday, 7 August 2026. Responses should be emailed to Sergeant Gabriel Mendez at gabriel.mendez@usmc.mil. Interested parties should incldue their company name, address, phone number, point of contact, CAGE code, company size status, and whether or not they are a U.S. or foreign-owned firm.

Keysight UXA Agile Signal Generator and Signal Studio

NAVAL RESEARCH LABORATORY

N0017326P2445 was a Brand Name competitive requirement.

1660014869710; P/N 10-2140; HEATER PACKAGE,AIRC

DLA AVIATION

PLEASE REVIEW THE BELOW NSN AND PROVIDE US WITH ANY SOURCES THAT ARE ABLE TO MANUFACTURE THE ITEM. PLEASE ALSO PROVIDE THE LOCATION (CITY AND STATE) OF THE MANUFACTURER AND POINTS OF CONTACT. PLEASE PROVIDE THIS TO Steven Oliver at steven.oliver@dla.mil. NSN: 1660014869710; Part Number: 10-2140 THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR A PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITAITON AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.

Cylinder Assembly, A

DLA AVIATION AT OKLAHOMA CITY, OK

Procurement of up to 30 EA Cylinder Assembly, A. The Government does not own the data or the rights to the data needed to manufacture this item. Firms interested in participating in this procurement are encouraged to contact the OEM, to inquire about the data or rights to the data.

CATM Range Cleaning

FA4661 7 CONS CD

The 7th Contracting Squadron (7 CONS) at Dyess Air Force Base, Texas, is issuing this Sources Sought Synopsis / Request for Information (RFI) on behalf of the 7th Security Forces Squadron (7 SFS) to conduct market research in accordance with RFO Part 10. The Government is seeking qualified, experienced commercial sources capable of providing turnkey, quarterly indoor firing range cleaning as outlined in the Attached PWS . This notice is for market research and planning purposes only and does not constitute a formal solicitation, Request for Proposal (RFP), or Request for Quotation (RFQ). Information received will assist the Government in determining the appropriate acquisition strategy, evaluating potential socioeconomic set-asides under NAICS 562910 (Environmental Remediation Services, size standard $25.0M), and developing the Independent Government Estimate (IGE). Prospective offerors are requested to submit a: Statement of Capability (SOC) and an informal, non-binding Rough Order of Magnitude (ROM) ballpark pricing estimate in accordance with the attached Sources Sought document Responses requested to t be submitted via email to TSgt Trevor Finch at trevor.finch.1@us.af.mil no later than 9 October 2026 at 14:00 CDT.

TX FW LGA 10(5) Steve Thompson Wildlife Drive

6982AF CENTRAL FEDERAL LANDS DIVISI

PROJECT NUMBER: TX FW LGA 10(5) PROJECT NAME: Steve Thompson Wildlife Drive PROJECT DESCRIPTION: The proposed project is in Laguna Atascosa National Wildlife Refuge in Cameron County, Texas approximately 25 miles east of Harlingen, Texas. The existing terrain is flat. SCOPE OF THE WORK: The proposed project includes full depth reclamation of existing driving surface which includes chip seal material, and existing gravel. After completing full-depth reclamation new aggregate surface course will be added to create a driving surface that has a consistent width. The project also includes installation of aluminum gate and a small concrete pad and safety improvement signs and speed bumps. The project includes three (3) alternate bid items for Aggregate Surface Course (TON) with one (1) being awarded. Alternate 1: 2-inches of aggregate surface course added to Bayside Drive and Steve Thompson Wildlife Drive and terminating at Renee’s Overlook Parking Area. Alternate 2: 2-inches of aggregate surface course added to Bayside Drive and Steve Thompson Wildlife Drive. Alternate 3: 3-inches of aggregate surface course added to Bayside Drive and Steve Thompson Wildlife Drive and terminating at Renee’s Overlook Parking Area.

WHEEL, SOLID RUBBER TIRE

DLA LAND WARREN

Synopsis SPRDL1-27-R-A001 This posting is a synopsis, not an official RFP. DLA Weapons Support (Warren) anticipates issuing a solicitation that will result in a Firm-Fixed Price, 5 Year, Long Term Contract (LTC) for the following item: Noun: Wheel, Solid Rubber Tire NSN: 2530-00-293-5137 Part Number (P/N): 8706067 5 Yr LTC: Guaranteed Minimum: 180 ea, Estimated Maximum: 9500 ea Inspection/Acceptance: Origin FOB: Destination Packaging: Military B First Article Test (FAT): Qty 12 units *Other than New Material worksheet and First Article Test Waiver worksheet will be provided upon request* TDP: Technical Data is available for this procurement. This solicitation is Full and Open Competition. The solicitation should be released to the web on or about 15 days from this notification posting. See the solicitation for actual closing date. Once available, the solicitation can be downloaded from SAM.gov (https://www.SAM.gov).

CIRCUIT CARD ASSEMB

NAVSUP WEAPON SYSTEMS SUPPORT MECH

NSN: 5998012719736 Nomenclature: CIRCUIT CARD ASSEMB PN: 5599503-9 Qty: 1

56/P Helmet and Components

DLA TROOP SUPPORT

This procurement is for the Aircrew Integrated Helmet System which consists of the HGU-56/P Helmet and 25 Component Parts. There is a total of twenty-six items (26), thirteen (13) of which require Engineering Source Approval (ESA). The remaining items are considered competitive items. Any contractor who would like more information regarding the Engineering Source Approval process should contact the DLA Troop Support Contract Specialist who will provide the Product Manager Air Warrior POC. DLA Troop Support anticipates issuing a solicitation for a firm-fixed price, Requirements type contract for the Best Estimated Quantities (BEQ) listed below. The BEQ below represents the quantity for each Tier period. In addition, it is noted below what items require ESA approval and which are competitive: Lining, Helmet, Shock, Thermoplastic – Competitive – 633 EA – PLT: 90 days Liner, Helmet, Cloth – Competitive – 69 EA – PLT: 90 days Lining, Helmet, Shock – ESA – 398 EA - PLT: 90 days Shell, Flyer’s Helmet – ESA – 81 EA – PLT: 90 days HGU-56/P Helmet, Flyer’s – ESA – 283 EA – PLT: 120 days PAD, Helmet Chin Strap – ESA – 278 EA - PLT: 90 days Helmet, Retention Assembly – ESA – 31 EA - PLT: 90 days Strap Assembly, Chin – ESA – 86 EA - PLT: 90 days Visor, Flyer’s Helmet, 2 Notch – ESA – 19 EA - PLT: 90 days Visor, Flyer’s Helmet, 3 Notch – ESA 19 EA - PLT: 180 days Spacer Kit, Earcup – Competitive – 55 EA - PLT: 90 days Earcup, Flyer’s Helmet – ESA – 64 EA - PLT: 90 days Housing, Flyer’s Helmet – ESA – 19 EA - PLT: 90 days Visor, Flyer’s Helmet (Outer) – ESA – 480 EA - PLT: 60 days PAD Set, Fitting, Flyers – Competitive – 14 EA - PLT: 90 days Visor, Flyer’s Helmet (Inner) – ESA – 398 EA - PLT: 60 days Dual Visor Assembly – Competitive – 84 EA - PLT: 90 days Earpad Seal Assembly – Competitive – 237 EA - PLT: 90 days Edge Beading – Competitive – 115 EA - PLT: 90 days Shield Maxillofacial – ESA – 31 EA - PLT: 90 days Track, Assembly, Lower Left – Competitive – 115 EA - PLT: 90 days Tr

VALVE,REGULATING,FL

NAVSUP WEAPON SYSTEMS SUPPORT MECH

AMC 3. Acquire, for the second or subsequent time, directly from the actual manufacturer. AMSC R. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. This code is used when the Government did not initially purchase the data and/or rights. If only one source has the rights or data to manufacture this item, AMCs 3, 4, or 5 are valid. If two or more sources have the rights or data to manufacture this item, AMCs 1 or 2 are valid.

Non-Volatile Memory Susceptibility Prediction

DEFENSE MICROELECTRONICS ACTIVITY

The Defense Microelectronics Activity (DMEA), McClellan, CA is issuing this Sources Sought Notice to find potential sources to provide Non-Volatile Memory Susceptibility Prediction. See attached sources sought notice for more detail.

Lease Space in Los Angeles, CA

PBS R00 OFFICE OF LEASING

AN/PVS-31A Night Vision Device and Accessories

W6QK ACC-APG

REQUEST FOR PROPOSALS (RFP) Solicitation Number: W91CRB27RA001 Solicitation for: AN/PVS-31A Night Vision Device and Accessories Type of Solicitation: Total Small Business Set-Aside The U.S. Government is soliciting proposals for the procurement of forty-four (44) commercial AN/PVS-31A, Part Number (P/N BNG-001-A28), two (2) Image Intensifier Tubes for AN/PVS-31A, Part Number (P/N BNG-020-A28), and forty-four (44) Wilcox G24 Helmet Mount, color-black, Part Number (P/N 28300G24-B) to fulfill a Foreign Military Sales (FMS) requirement on behalf of the Security Assistance Management Directorate (SAMD) for the country of Colombia under Foreign Military Sales Case (FMS): CO-B-VJN, Acquisition Requirements Package (ARP) CE26030. See attached solicitation W91CRB27RA001 for details of supplies being procured. Contractors are responsible for obtaining the solicitation documents through the System for Award Management (SAM) website https://www.sam.gov. The Government will not provide paper copies of the solicitation. Contractors must be registered in the SAM database to be considered for award of a federal contract. Information regarding registration can be obtained from the SAM link at: https://sam.gov/entity-registration. Contractors Information Technology (IT) must be compliant with Cybersecurity Maturity Model Certification (CMMC) Level 2 (self-assessment) with the possibility of processing, handling, exchanging information that will require CMMC Level 2 (C3PAO) assessment after 10 November 2026. While the contractor is not yet required to be CMMC certified at Level 2 (C3PAO), the contractor’s IT must satisfy requirements to receive, handle, store, process, and deliver CUI Specified information. Please Note: There are additional technical requirements specific to the Statement of Work (SOW) that have been placed under controlled access and is restricted to potential vendors with a Cybersecurity Maturity Model Certification (CMMC) Level 2. Submission of Questions: Questions

12363N26Q4212 DH Brockover IRSC Stewardship

USDA FS SAN JUAN NATIONAL FOREST

Thermographic video camera for prototype thermal test monitoring

FERMILAB - DOE CONTRACTOR

The Mu2e production target design effort requires a thermographic video camera for prototype thermal test monitoring at a high level of accuracy and detail to validate target performance and guarantee particle production yield for timely completion of the experiment. This specification covers the minimum requirements for a camera that meets the needs of the test series and project.