Tenders

Rankin Inlet Healing Facility Flooring Replacement

Government of Nunavut

SOA Municipal Support Services, Nunavut

Government of Nunavut

Request for Proposals for Dufferin Transfer Station Electrical Upgrades & Renewable Natural Gas (RNG) New Power Feeder

City of Toronto

On-Site Optometry for Long-Term Care (LTC) Homes Fairvern and The Pines

District Municipality of Muskoka

P65RD26648-2-Auxiliary Components

Toronto Transit Commission - PCM Capital

This Request for Quotation (the “RFQ”) is an invitation by the Toronto Transit Commission (“TTC”) to Suppliers to submit pricing and delivery for Auxiliary Components for installation by TTC’s Signals/Electrical/Communications department.

Amherst Cove Consolidated School - Parking Lot Paving

Prince Edward Island

Inbound Beverage Alcohol Transportation Services

Prince Edward Island

Roadwork-DECOMMISSIONING OF A WOOD BOX CULVERT and SUPPLY AND INSTALLATION OF CULVERTS

Highways and Infrastructure

Veterinary Scope Tower Equipment and Instruments

University of Saskatchewan

Janitorial Services for Saskatoon Customer Service Centre and Technical Training Centre

SaskEnergy Incorporated

Request for Tender #3526 Aspose.Total for .NET Licensing and Subscription

Manitoba Public Insurance

Manitoba Public Insurance, Request for Tender #3526 Aspose.Total for .NET Licensing and Subscription Manitoba Public Insurance’s purpose of this RFT is to solicit Tenders from Vendors to provide MPI with pricing for Aspose.Total for .NET licensing and subscription services required to support MPI applications, as more fully described in the RFT document. The final date for submissions is November 3, 2026. Other dates of significance are contained within the body of the RFT.

New Aircraft Tug

SaskBuilds and Procurement - Asset Management

LLM26024 PDYC Living Unit Condenser Replacement

SaskBuilds and Procurement - Asset Management

FUSE,HYDRAULIC SYST

NAVSUP WEAPON SYSTEMS SUPPORT

CONTACT INFORMATION|4|N763.14|TBD|215-697-4002|JULIANNA.FIANDRA@NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|X|||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|TBD||TBD|TBD|TBD|TBD|SEE SCHEDULE|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|PHILADELPHIA| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|12 MONTHS|60 DAYS AFTER DISCOVERY OF DEFECT||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| IF A FIRM FIXED PRICE (FFP) CANNOT BE DETERMINED, PLEASE INFORM THE PCO. THESE ITEMS REQUIRE GOVERNMENT SOURCE APPROVAL PRIOR TO AWARD. IF YOU ARE NOT AN APPROVED SOURCE, YOU MUST SUBMIT, TOGETHER WITH YOUR PROPOSAL, THE INFORMATION DETAILED IN THE NAVSUP WSS SOURCE APPROVAL BROCHURE WHICH CAN BEOBTAINED ONLINE AT h https://www.navsup.navy.mil/public/navsup/wss/business_opps/ UNDER "COMMODITIES." OFFERS RECEIVED WHICH FAIL TO PROVIDE ALL DATA REQUIRED BY THE SOURCE APPROVAL BROCHURE WILL NOT BE CONSIDERED FOR AWARD UNDER THIS SOLICITATION. PLEASE NOTE, IF EVALUATION OF A SOURCE APPROVAL REQUEST SUBMITTED HEREUNDER CANNOT BE PROCESSED IN TIME AND / OR APPROVAL REQUIREMENTSPRECLUDE THE ABILITY TO OBTAIN SUBJECT ITEMS IN TIME TO MEET G

P7777 ACC SARP Replacement NAS Jacksonville, Florida - AMAG Symmetry Enterprise video surveillance system

NAVFACSYSCOM SOUTHEAST

Notice of intent to use a brand name product. The Naval Facilities Engineering Systems Command, Southeast (NAVFAC SE) is performing a market survey to determine if other potential sources of supply can provide a Network Video Recorder (NVR) that has equal performance and that can fully integrate with the existing AMAG Symmetry Enterprise video surveillance system as the AMAG Symmetry CompleteView 7.4.2. manufactured by AMAG Technology, 2205 W. 126th Street Unit B, Hawthorne, CA 90250, and PoE video surveillance cameras that have equal performance and that can fully integrate with the existing AMAG Symmetry Enterprise video surveillance system as the AXIS P3275-LVE indoor and outdoor Dome Camera and cameras as the indoor mulitsensor AXIS P3818-PVE camera manufactured by AXIS Communications, 300 Apollo Drive, Chelmsford, MA 01824. Fiscal Year 2027 PROJECT P7777 ACC SARP Replacement NAS Jacksonville, Florida, requires the following characteristics: Provide network video recorder with the following capabilities: Must fully integrate into the existing AMAG Symmetry Enterprise video surveillance system to include all software, hardware, monitoring stations, and licensing. Minimum 5 year warranty Zeon E-2488 Processor 64 GB of RAM Windows Server 2019 Standard Embedded Operating System 2 x 480 GB M.2 SATA SSD OS with RAID I Up to 140 TB Video Storage Dedicated iDRAC Ethernet Port 1 x VGA Port 1 x Serial Port 2U Rack Mounting Provide video surveillance indoor and outdoor dome camera systems with the following minimum capabilities: Must fully integrate into the existing AMAG Symmetry Enterprise video surveillance system to include all software, hardware, and licensing. 2 MP color images 1/2.8” CMOS Image Sensor Forensic Wide Dynamic Range 0.08 lux minimum illumination/light sensitivity PoE Class 3 1920x1080 maximum video resolution 60 maximum frames per second Day and Night functionality Signed OS, Secure Boot, and Secure Keystore (CC EAL6+, FIPS 140-3 Level 3) security featu

Solicitation QTY 1 7RH 1680 015855262 P8

NAVSUP WEAPON SYSTEMS SUPPORT

This solicitation is for the repair of a commercial off the shelf (COTS) item for the P8 aircraft. NSN: 1680 01-585-5262 P8 Name: FLAP SKEW DETECTION. QTY: 1 This solicitation will be using competitive procedures. This solicitation will be using competitive procedures. The Government intends to make a single award to the eligible, responsible, technically acceptable offeror whose offer, conforming to the solicitation, results in the best value to the Government. Offers will be evaluated based on the factors of RTAT, price, and past performance, with RTAT being more important than price. The Government reserves the right to award the contract to other than the lowest priced offer. (1) Desired RTAT: 117 days after receipt of asset (2) Price. (3) Past Performance. The offeror's past performance on related contracts will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management communications between contracting parties, proactive management, and customer satisfaction. This requirement can only be procured from suppliers who provide FAA-Certified parts which possess a FAA Authorized Release Certificate, FAA Form 8130-3 Airworthy Approval Tag. All items shall be delivered with an authorized Release Certificate, FAA Form 8130-3, Airworthiness Approval Tag (reference FAA Order 8130.21G) or with acceptable FAA identifications for replacement articles described in reference FAA AC 20-62. WSS will not make any exceptions to this requirement.

HYDROSPHERE, BIOSPHERE, & GEOPHYSICS (HBG) SUPPORT SERVICES II - FINAL REQUEST FOR PROPOSAL (FRFP)

NASA GODDARD SPACE FLIGHT CENTER

The National Aeronautics and Space Administration (NASA), Goddard Space Flight Center (GSFC), hereby invites interested parties to review the Final Request for Proposal (FRFP) for the Hydrosphere, Biosphere, and Geophysics (HBG) Support Services II requirement supporting the Earth Sciences Division (ESD) at NASA/GSFC. The principal purpose of this requirement is to provide science research that conceives, develops, and applies space, field-deployed (i.e. airborne and in situ) and laboratory based technologies and observations to address issues of importance to society. These include but are not limited to water resources, land and ocean ecosystems, global and regional sea level change, changes in the Earth’s cryosphere, gravity field, magnetic field, solid Earth, and the terrestrial reference frame. The Statement of Work, Attachment A, describes the scope of the requirement. This contract is for support of a full range of science and research activities across the breadth of the various Laboratories that make up the HBG sub-division: the Cryospheric Sciences, Ocean Ecology, Hydrological Sciences, Biospheric Sciences, and Geodesy and Geophysics Laboratories. This contract is also for support of science, research and computing activities within the Terrestrial Information Systems Laboratory (TISL), also in the ESD. For the purposes of this document and contract the term HBG will be used to encompass all the Laboratories of the HBG sub-division and the TISL. NASA will conduct this acquisition as a small business set-aside . This competitive acquisition was originally contemplated as a Cost-Plus-Fixed-Fee (CPFF), Indefinite-Delivery/Indefinite-Quantity (IDIQ) contract with the ability to issue CPFF task orders. Following further acquisition planning and assessment of the Government's requirements, the contract structure has been modified. The HBG II Draft Request for Proposal (DRFP) posted on April 8, 2025 was issued as an IDIQ CPFF solicitation. As amended, this compet

P7777 ACC SARP Replacement NAS Jacksonville, Florida - Accurate Lock & Hardware

NAVFACSYSCOM SOUTHEAST

Notice of intent to use a brand name product. The Naval Facilities Engineering Systems Command, Southeast (NAVFAC SE) is performing a market survey to determine if other potential sources of supply can provide a ligature-resistant sliding door system that has equal performance to the LR-SDS / SL-LR-SDS, manufactured by Accurate Lock & Hardware, 1 Annie Place, Stamford, CT 06902. Fiscal Year 2027 PROJECT P7777 ACC SARP Replacement NAS Jacksonville, Florida, requires the following characteristics. Provide ligature-resistant sliding door system with the following capabilities: Ligature-Resistant Design – A sliding door system specifically designed for behavioral health environments that eliminates ligature opportunities associated with conventional swinging doors, including the top edge of the door and side latch locations. The system shall utilize a concealed overhead track, concealed locking hardware, ligature-resistant operating trim, and concealed vertical rod locking or latching mechanisms with no exposed anchor points or accessible cavities. Threshold and Floor Guide – An anti-barricade floor guide that allows sliding operation without creating additional ligature points. Optional threshold/transom assemblies shall be available to reduce the bottom door gap while allowing emergency access and maintaining safe operation. Safety and Security Features – The system shall reduce opportunities for patient barricading, prevent the door from being used as a swinging weapon, and provide staff override capability for all interior locking functions. Locking functions shall include behavioral health applications such as classroom, storeroom, and self-latching patient room configurations. Performance Requirements – The system shall: Meet or exceed a 150 ft-lb impact test in accordance with ANSI A250.13-2014, Section 6.1.1.2. Continue to function following impact testing. Utilize dual ball-bearing carrier assemblies rated at 1,240 lbs dynamic load capacity each. Where required

P7777 ACC SARP Replacement NAS Jacksonville, Florida - AMAG Access Control Equipment panel

NAVFACSYSCOM SOUTHEAST

Notice of intent to use a brand name product. The Naval Facilities Engineering Systems Command, Southeast (NAVFAC SE) is performing a market survey to determine if other potential sources of supply can provide an access control equipment panels that has equal performance and that can fully integrate with the existing AMAG Symmetry Enterprise video surveillance system as the AMAG M2150-2DBC, M2150-4DBC, M2150-DBU/MKII, and M2150-8DBC/MKII manufactured by AMAG Technology, 2205 W. 126th Street Unit B, Hawthorne, CA 90250. Fiscal Year 2027 PROJECT P7777 ACC SARP Replacement NAS Jacksonville, Florida, requires the following characteristics. Provide access control equipment panel with the following capabilities: Must fully integrate into the existing AMAG Symmetry Enterprise access control system to include all software, hardware, database, and licensing. Connects to AMAG Symmetry management software via LAN Can control up to 16 doors per equipment panel Can manage 20,000 card holders and 65,000 offline transactions (expandable to 250,000) Connect smart card, proximity readers Wiegand support using WIM UL 294 and UL 1076 listed 100 Mbps network connection Input and output modules This notification is for market research purposes only to identify if other potential sources of supply can meet the requirements of the Government. This is not a request for proposals, quotes, or an invitation for bid. The intent of this notice is to identify other potential sources of this product. To be considered, please submit detailed technical data for the Government to conduct a comprehensive evaluation of your manufactured product to ensure compatibility with the existing system. In accordance with FAR 15.201(e), a response to this notice is not an offer and cannot be accepted by the Government to form a binding contract. The responder is solely responsible for the information it submits and any associated costs. The Government reserves the right to disregard any submittal that is incomp

58--RADAR SET SUBASSEMB

DLA AVIATION AT PHILADELPHIA, PA

NSN 7R-5841-014906729-QE, IAW REF NR 1023353G-1, QTY 6 EA, DELIVERY FOB ORIGIN. The data needed to acquire/repair this part competitively is not physically available, it cannot be obtained economically, nor is it possibleto draft adequate specifications or any other adequate, economical description of the material for a competitive solicitation. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluated at NAVSUP WSS submit with your offer a copy of the cover letter which forwarded your request for source approval. Offers received which fail to provide all data required by the Source Approval Brochure or document previous submission of all data required by the Source Approval Brochure will not be considered for award under this solicitation. Please note, if evaluation of a source approval request submitted hereunder cannot be processed in time and/or approval requirements preclude the ability to obtain subject items in time to meet Government requirem

S&RTS Rotterdam, Netherlands

USTRANSCOM-AQ

10/21/2026: Synopsis Posted 7/31/2026: Amendment 0002 Posted: Updated Question and Answer and extended the solicitation due date to 5 August 2026 at 12:00 PM Central Time. 7/16/2026: Amendment 0001 Posted: Updated Attachment 1: Performance Work Statement and extended end date to 3 August 2026. Provide Stevedoring and Related Terminal Services (S&RTS) at Rotterdam, Netherlands in connection with the import and export of Defense Transportation System (DTS) sponsored cargo. Services will cover the full spectrum of handling surface moving cargo, to include its receipt through disposition, and processing cargo for simultaneous shipments via multiple surface modes of transportation as designated by the Contracting Officeer (CO) or their appointed Contracting Officer's Representative (COR) and Alternate Contracting Officer's Representative (ACOR). The contractor may be required to perform services 24 hours per day, seven (7) days per week, 365 days per year to include all official holidays. USTRANSCOM is seeking information about what solutions currently exist in the market and is interested in learning about what information industry may need to scope a logical roadmap to succeed.

28--BLADE SET,FAN,AIRCR, IN REPAIR/MODIFICATION OF

NAVSUP WEAPON SYSTEMS SUPPORT

NSN 7R-2840-016578391-F7, TDP VER 002, QTY 34 SE, DELIVERY FOB ORIGIN. This part is a commercial/nondevelopmental/off-the-shelf item. Commercial item descriptions, commercial vendor catalog or price lists or commercial manuals assigned a technical manual number apply. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluated at NAVSUP WSS submit with your offer a copy of the cover letter which forwarded your request for source approval. Offers received which fail to provide all data required by the Source Approval Brochure or document previous submission of all data required by the Source Approval Brochure will not be considered for award under this solicitation. Please note, if evaluation of a source approval request submitted hereunder cannot be processed in time and/or approval requirements preclude the ability to obtain subject items in time to meet Government requirements, award of the subject requirement may continue based on Fleet support need