Tenders

DSCR B34 & B42 System Smoke Testing & Hydro Jetting

DCSO RICHMOND DIVISION #1

Synopsis Defense Supply Center Richmond (DSCR) B34 & B42 DWV System Smoke Testing & Hydro Jetting In accordance with executive order 14721 which requires agencies to procure commercially available products and services to the maximum extent practicable, this is a synopsis for commercially available services prepared in accordance with the format in FAR Part 12, and supplemented with additional information included in this notice The solicitation number SP4703-27-Q-0003 is issued as a request for quotes (RFQ). The resulting contract will be a firm-fixed price award with an expected Period of Performance of 60 days from the issuance of the Notice to Proceed. This acquisition is set-aside for 100% small businesses. The North American Industry Classification System (NAICS) Code is 236220 (Office Buildings). The small business size standard is $45M. Department of Labor Wage Determination based on location of the service provided (Chesterfield County, VA). Partial proposals will not be accepted. For an offer to be considered for award, the prime contractor must be within a commutable driving distance to the DSCR facility and hold an office publicly visible on SAM.gov to validate this claim. A 120-mile radius from DSCR is considered the commutable radius. The Contractor shall list the address from which mobilization occurs on their proposal. Award will be made to the lowest priced, technically acceptable (LPTA) offeror that meets the requirements stated in the Statement of Work and the solicitation. Also refer to clauses and provisions included in this notice. Past performance will be considered a part of Technical Acceptability, and the Contracting Officer will pull contractor data from CPARS and SPRS. The contractor must be registered in the System for Award Management (SAM) prior to award. If not already registered in SAM, go to the SAM website www.sam.gov to register prior to submitting your quote. Site visit November 5, 2026 at 10:00am . Coordinate site access with Ra

Request for Information - DNA Buccal Collection Kits

DIVISION 0700

THIS IS A SOURCES SOUGHT NOTICE; REQUEST FOR INFORMATION (RFI). This is not a Request for Proposal (RFP) and/or Request for Quote (RFQ). This request for capability information does not constitute an RFP or RFQ and does not commit the Government to contract for any supply or service. The Federal Bureau of Investigation (FBI) is not at this time seeking proposals or quotes, and will not accept unsolicited proposals or quotations. Submission of any information in response to this market survey is purely voluntary. This RFI is being used as a Market Research tool for informational purposes and for preliminary planning purposes to identify potential sources that possess the required experience and expertise to provide the required laboratory suppliesand support services. Small and large businesses are encouraged to respond. Please review the attached document.

BFSU Electricity Services

BILLINGS AREA INDIAN HEALTH SVC

This is a Sources Sought notice. This is NOT a solicitation for proposals, proposal abstracts, or quotations. Pursuant to 48 CFR Part 326, Subpart 326.603-3 and IHM 5.5-6, Indian Health Service must use the negotiation authority of the Buy Indian Act, 25 U.S.C. 47, to give preference to Indian Economic Enterprises (IEE) whenever the use of that authority is authorized and practicable. The Government is seeking to identify Indian Small Business Economic Enterprises (ISBEEs), Indian Economic Enterprises (IEE), and any other category of vendor capable of performing the below Indian Health Services (IHS) requirement. Any vendor responding to this notice should submit their capability statement as well as the Buy Indian Act Indian Economic Enterprise Representation Form (attached). Consistent with the revised Buy Indian Act, HHS/IHS adopted the definition of an Indian Economic Enterprise (IEE) set forth in 48 CFR 1480.201. This definition includes the following requirement, amongst others: “The Indians or Indian Tribes must, together, receive at least a majority of the earnings from the contract.”. Instructions for submission are outlined further below. DEFINITIONS INDIAN ECONOMIC ENTERPRISE (IEE) : Any business activity owned by one or more Indians, Federally Recognized Indian Tribes, or Alaska Native Corporations provided that: The combined Indian, Federally Recognized Indian Tribe or Alaska Native Corporation ownership of the enterprise constitutes not less than 51%; The Indian, Federal Recognized Indian Tribes, or Alaska Native Corporations must, together, receive at least 51% of the earnings from the contract; and The management and daily business operations must be controlled by one or more individuals who are Indians. DESCRIPTION OF REQUIREMENT NAICS: 221122 – Electric Power Distribution Size Standard: 1,100 Employees Duration: One (1) Year with Four (4) Option Years Project Title: BFSU Electric Utility Services Background/Purpose: Blackfeet Service Unit (BFSU), G

“NSN 0680-01-221-2863, BELL CRANK, WSDC: 40A, HELICOPTER, BLACKHAWK, UH-60A, UH-60L, HH/UH-60M, UH-60V.”

DLA AVIATION

DLA Weapons Support, Richmond is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for BELL CRANK. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336413. THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. If your organization has the potential capacity to perform these contract services, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated to deliver technical capability, organizations should address the administrative and management structure of such arrangements. The government will evaluate market information to ascertain potential market capacity to 1) provide services consistent in scope and scale with those described in this notice and otherwise anticipated; 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements; 3) implement a successful project management plan that includes: compliance with tight program schedules; cost containment; meeting and tracking performance; hiring and retention of key personnel and risk mitigation; and 4) provide services under a performance based service acquisition contract. BASED ON THE RESPONSES TO

Calibration and Temperature Mapping

W40M USA HCA

See amendment 4 for answers to the questions that were due on 9 October 2026. See amendment 3 for extending date answers will be posted and date quotes are due. See SOW attached to solicitation and solicitation amendment

59--MICROCIRCUIT,DIGITAL

DLA LAND AND MARITIME

5990 - ROTOR POSITIONING U

DLA AVIATION AT PHILADELPHIA, PA

Justification and approval for the acquisition of 29 ea. ROTOR POSITIONING UNIT. NSN 5990-01-460-6390

Steel and Other Metal Materials for the Marietta Repair Station: Stamford De-Watering Box Material PH 1

W072 ENDIST HUNTINGTON

This procurement is for one (1) firm-fixed price commercial supply contract for the Marietta Repair Station to procure steel materials to complete work on Stamford De-Watering Box. The work includes providing the listed steel and other materials using NAICS code 332312 and PSC 9520. 1.1 Material: ASTM 1018 CR round bar. 1.a 6 1/2” dia round, 8’ long qty 6 2.1 Material: ASTM A434 CL bc (Q&T). 2.a 4” dia solid, 8 ft long, qty 20 3.1 Material: ASTM A53 Seamless pipe 3.a 1 ” Dia Sch 40, qty 500 ft 3.b 3” dia Sch 40, 2 4.1 Material: ASTM 1026 tubing seamless 4.a 8” dia, 1.125 wall thickness, 20 ft long qty 1 5.1 Material: ASTM A36 5.a 1” dia round solid, 20 ft long, qty 2 5.b 2” flat bar, ” thick, 20’ long. qty 2 5.c 2 /2” flat bar, ” thick, 20’ long, qty 4 6.1 Material: ASTM 709 Gr 50 for zone 2 (Plate) 6.a ” thick 4’ wide 8’ long qty 18 6.b ” thick 4’ wide 8’ long, qty 28 6.c 1” thick 5’ wide 10’ long, qty 8 6.d ” thick 5’ wide 10’ long, qty 4 7.1 Material: ASTM A709 Gr 50 for zone 2, T-Beam 7.a WT 7x37, 20’ long, 12 8.1 Material: ASTM A709 Gr 50 for zone 2, Flat bar 8.a 4” thick, 10” wide, 10’ long, qty 30 8.b 1” thick, 25” wide, 10’ long, qty 30 8.c 2” thick, 3” wide, 10’ long, qty 30 8.d ” thick, 2” wide, 10’ long, qty 30 9.1 Material: ASTM A36 9.a ” thick, 4’ x 8’ plate, qty 25 9.b ” thick, flat bar 3” wide, 20’ long, qty 4 9.c 3/8” thick, flat bar 3” wide, 20’ long, qty 4 10.1 Material: ASTM 709 Gr 50 for zone 2, 10.a Rolled Skin plate with weld bevels marked in yellow in the attached drawings. 11.1 Material: ASTM 709 Gr 50 for Zone 2. 10.a Seal Bar shapes and qty is attached in drawings. 12.1 Fasteners: ASTM A325 12.a 1” dia 8, TPI, 8” length 12.b 1” dia DTI, Washers, qty 500 12.c 1” dia 8, TPI, Heavy Hex Nut, qty 500 12.d 1” dia 8, TPI, Jam Nut, qty 500 12.e 1 1\2”, 6 TPI. 7” long, with Castle Nut Cotter Pin, qty 100

61--CONTACT SET,MOTOR S

DLA LAND AND MARITIME

Sources Sought-ePMO Support Services

W6QK ACC-APG DIR

THIS REQUEST FOR INFORMATION IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL {RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. Interested businesses should submit a brief capabilities statement package {no more than ten 8.5 X 11-inch pages, font no smaller than 10 point) demonstrating ability to provide the products/systems listed in this Technical Description. Documentation should be in bullet format. No phone or email solicitations with regards to the status of the RFP will be accepted prior to its release. Your response to this RFI, including any capabilities statement, shall be electronically submitted to the Contracting Specialist, Kristen Zigmont in either Microsoft Word or Portable Document Format {PDF), via email to kristen.zigmont.civ@army.mil no later than 2:00 p.m. Eastern Daylight Time {EDT) on 30 October 2026 and reference this synopsis number in subject line of e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL. If your organization has the potential capacity to provide the required products/systems, please provide the following information: 1) Organization name, address, primary points of contact (POCs) and their email address, FAX, Web site address, telephone number, and type of ownership for the organization; and 2) Tailored capability statements addressing the requirements of this notice, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated to deliver techn

Housing, Mechanical

DLA AVIATION AT OKLAHOMA CITY, OK

Synopsis PR: FD2030-27-00025 1. Estimated issue date and estimated closing/response date: Issue: October 21, 2026 Closes: November 20, 2026 2. RFP# SPRTA1-27-R-0024 Request for Proposal 3. Service/Spare/Repair/OH: Spares 4. AMC: 3/P 5. Nomenclature/Noun: Housing, Mechanical 6. NSN: 1650-00-133-9481 7. PN: 706963 8. History: 27 Feb 2019, 148 each, Hamilton Sundstrand Corporation, (99167) 31 Oct 2018, 16 each, Hamilton Sundstrand Corporation, (99167) 9. Description/Function: Housing, Mechanical. DIMENSIONS, 13.0 INCH (L) BY 13.0 INCH (W) BY 6.0 INCH (H). 15.0 POUNDS (WEIGHT). MATERIAL CONTENT, Magnesium, steel alloys. Houses internal components of the constant speed drive, provides the mating surface for the generator interface to the CSD. APPL. TO B-52. 10. Total Line Item Quantity: L/I 0001 39 Each (Range: 10-59) 11. Application (Engine or Aircraft): B-52 12. Destination: Ship to SW3211, Tinker AFB, OK 13. Required Delivery: On or Before 30 Oct 2027 14. Qualification Requirements: Contractor must be an approved source. 15. Export Control Requirements: No 16. UID: UID requirements will apply. 17. Qualified Sources: Hamilton Sundstrand Corporation (CAGE 99167) 18. Set-aside: This acquisition will not be set aside. 19. Surplus: Surplus is not authorized. 20. Mandatory Language: The Government does not own the data or the rights to the data needed to manufacture this item. Firms interested in participating in this procurement are encouraged to contact the OEM to inquire about the data or rights to the data. In accordance with FAR 5.207(c) (16) (i), all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Foreign owned firms are advised to contact the contracting officer or program manager before submitting a proposal to determine whether there are restrictions on receiving an award. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement m

Keysight UXA Signal Analyzer

NAVAL AIR WARFARE CENTER

The Naval Air Warfare Center, Weapons Division, China Lake, CA intends to procure on other than full and open competition basis a manufacture sole source to Keysight Technologies Inc. 1900 Garden of the Gods Road Colorado Springs CO 80907-3423, with full and open among authorized distributors the following items: Keysight UXA Signal Analyzer P/N: N9042B UXA Signal Analyzer with accessories Qty: 1 EA. Complete details will be available in the solicitation. The solicitation or Request for Quote (RFQ) will be posted in Contract Opportunities on the SAM website at https://sam.gov/ on or about 10/20/26. All responsible sources may submit a quote, which shall be considered by the agency. The written response shall reference solicitation number N68936 27Q0010 and shall be submitted by email to Amy Lamberth at amy.s.lamberth.civ@us.navy.mil All vendors must be registered at https://sam.gov/ prior to submitting quotes. It is recommended that all interested parties be aware that processing this additional information may take at least 10-15 days and are proactive in maintaining the SAM registrations in an 'Active' status as the government cannot award an entity without an 'Active' SAM registration. Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information (CUI) or Export Controlled Information. Access to CUI is limited, to a single point of contact (POC) per CAGE code , who is listed as the Data Custodian on the DD 2345 and approved by Defense Logistics Agency (DLA). The DD 2345 must be approved prior to requesting access to CUI in SAM.gov. Contractors are responsible for coordinating with their CAGE code’s Data Custodian POC to request access to CUI . For additional information, visit the DLA website for the Joint Certification Program: https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/.

United States Army Western Hemisphere Command (USAWHC) G-6 Information Technology Service Management Western Command and Control System (WCCS)

IT CONTRACTING DIVISION - PL83

This is a SOURCES SOUGHT NOTICE to determine the availability and technical capability of small businesses and large businesses (including the following subsets: Small Disadvantaged Businesses, certified 8(a), Service-Disabled Veteran-Owned Small Businesses, HUBZone Small Businesses and Woman-Owned Small Businesses) to provide the required products and/or services. USAWHC G-6 seeks information from potential sources for comprehensive Information Technology Service Management (ITSM) support for the WCCS. Established as the Army’s theater-level headquarters supporting both U.S. Northern Command and U.S. Southern Command, USAWHC unifies former United States Army North and United States Army South capabilities into a single four-star command executing homeland defense, defense support to civil authorities, and theater security cooperation across North America, Latin America, and the Caribbean. In support of this newly formed Theater Army for the Americas, HQ USAWHC G-6 requires comprehensive ITSM solutions to deliver and sustain critical command and control (C2), Unified Communications (UC), Audio/Visual (AV), and enterprise information technology (IT) capabilities. Scope of support spans HQ USAWHC (Fort Liberty/Camp Mackall), Joint Base San Antonio, and associated remote/Deployable Communications Element (DCE) locations, encompassing program management, service desk/information management operations (IMO), data center and network operations, asset accountability, knowledge management, and full-spectrum cybersecurity—including Risk Management Framework (RMF)/Authority to Operate sustainment, vulnerability management, incident response, and communications security operations (COMSEC) accountability.

Wiring Harness, Branched

DLA AVIATION AT OKLAHOMA CITY, OK

Synopsis PR: FD2030-27-00026 1. Estimated issue date and estimated closing/response date: Issue: October 21, 2026 Closes: November 20, 2026 2. RFP# SPRTA1-27-R-0025 Request for Proposal 3. Service/Spare/Repair/OH: Spares 4. AMC: 3/R 5. Nomenclature/Noun: Wiring Harness, Branched 6. NSN: 6150-01-211-8062 7. PN: 713447E 8. History: 2 Mar 2026, 17 each, Hamilton Sundstrand Corporation, (99167) 9. Description/Function: Wiring Harness, Branched. DIMENSIONS, 6.5 INCH (L) BY 3.5 INCH (W) BY 6.0 INCH (H). 4.0 POUNDS (WEIGHT). MATERIAL CONTENT, Steel alloy, magnesium alloy, plastics, copper, and teflon. Governor portion regulates CSD output speed, switches relay temperature and oil pressure to the engineering panel. APPL. TO B-1. 10. Total Line Item Quantity: L/I 0001 33 Each (Range: 9-50) 11. Application (Engine or Aircraft): B-1 12. Destination: Ship to SW3211, Tinker AFB, OK 13. Required Delivery: On or Before 30 Oct 2027 14. Qualification Requirements: Contractor must be an approved source. 15. Export Control Requirements: No 16. UID: UID requirements will apply. 17. Qualified Sources: Hamilton Sundstrand Corporation (CAGE 99167) 18. Set-aside: This acquisition will not be set aside. 19. Surplus: Surplus is not authorized. 20. Mandatory Language: The Government does not own the data or the rights to the data needed to manufacture this item. Firms interested in participating in this procurement are encouraged to contact the OEM to inquire about the data or rights to the data. In accordance with FAR 5.207(c) (16) (i), all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Foreign owned firms are advised to contact the contracting officer or program manager before submitting a proposal to determine whether there are restrictions on receiving an award. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contract with the firms(s) lis

Steel and other Materials for the Marietta Repair Station: Stamford Barrier Gate Material PH 2

W072 ENDIST HUNTINGTON

This procurement is for one (1) firm-fixed price commercial supply contract for the Marietta Repair Station to procure steel materials to complete work on Stamford De-Watering Box. The work includes providing the listed steel and other materials using NAICS code 332312 and PSC 9520. 1.1 Material: ASTM 4140 HR ANN round bar. 1.a 5” dia round, 8’ long qty 3 2.1 Material: ASTM C95500 Bronze. 2.a 5” dia solid, 10 ft long, qty 2 3.1 Material: ASTM 6061-T6 Aluminum 3.a 7” OD solid, 8ft length, qty 1 3.b 13” OD solid, 10 ft long, qty 1 4.1 Material: ASTM 1026 tubing seamless 4.a 8” dia, 1.125 wall thickness, 20 ft long qty 1 5.1 Material: ASTM 1018 CR 5.a 9” dia solid, 8’ long, qty 1 6.1 Material: ASTM A668 CL G 6.a 12” dia, 8’ ft long, qty 2 6.b 8” dia, 8’ ft long, qty 1 7.1 Material: ASTM C95400 Alum Bronze 7.a 12” OD x 8” ID 4’ ft long, qty 1 7.b 10” OD x 7” ID 4’ ft long, qty 2 8.1 Material: ASTM A240 Duplex 2205 8.a 3” thick, 4’x 8’ plate, qty 10 8.b 2” thick, 4’ x 8’ plate. qty 10 8.c 5” dia round solid, 8’ long, qty 1 9.1 Material: ASTM A36 9.a ” thick, 4’ x 8’ plate, qty 25 9.b ” thick, flat bar 3” wide, 20’ long, qty 4 9.c 3/8” thick, flat bar 3” wide, 20’ long, qty 4 10.1 Material: ASTM A1 Rail 10.a #60 AS Rail qty 500 foot

INVESTIGATIVE INTERVIEWING TRAINING COURSE

6973GH FRANCHISE ACQUISITION SVCS

Investigative Interviewing course to provide Federal Aviation Administration (FAA) employees with the tools necessary for conducting ethical, outcome-based interviewing. Learned techniques used in the Plan and Preparation, Engage and Explain, Account – Clarification and Challenge, Closure and Evaluation (P.E.A.C.E.) Model, will assure FAA employees get the right information in the right manner when interviewing for Safety Hotline, Whistleblower, and Suspected Unapproved Parts Investigations; Certificate Management Principal Inspector, Supplier Control, and Quality System Audits; Organization Designation Authorization and Designee Management Inspections; Safety Management System Assessments; and Compliance Action/Enforcement Investigations. Investigative interviewing (and particularly the PEACE model which is the preferred method) aligns with these principles and is considered as the most ethical, transparent and best practice way to obtain reliable and relevant information from persons of interest, complainant, witnesses and respondents. This method has interviewers using an open-ended line of questioning and fewer leading questions to get the answer that are needed and not leading the interviewee in a certain direction. Please review all documents attached in this notice.

Lodging Spokane WA

W7N6 USPFO ACTIVITY WA ARNG

This is a combined synopsis/solicitation for commercial items prepared in accordance with format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number/FY27-0012503534 is hereby issued as a Request for Quote (RFQ). The Incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-05 Dated 22 April 2024 and the Defense Federal Acquisition Regulation Supplement (DFARS) change notice 20240425. It is the contractor’s responsibility to become familiar with applicable clauses and provisions. This acquisition is 100% Small Business under North American Industry Classification Standards (NAICS) code 721110 This RFQ is for a Firm Fixed Price (FFP) contract. The Government intends to award a contract to a qualified vendor deemed responsive in accordance with the Federal Acquisition Regulation (FAR) Part 12, whose quote conforms to all of the RFQ's requirements and is judged to represent the Best Value to the Government in accordance with the evaluation scheme set forth in this RFQ. Evaluation will be based upon best value to the Government, and delivery of requirements will be FOB destination. This office will consider any late quotes or any late revisions of quotes as non-responsive. ln no event shall any understanding or agreement between the Contractor and any Government employee other than the Contracting Officer on any contract, modification, change order, letter or verbal direction to the contractor be effective or binding upon the Government. All such actions must be formalized by a proper contractual document executed by an appointed Contracting Officer. The Contractor is hereby notified that in the event a Government employee other than the Contracting Officer directs a change in the work to be performed or increases the scope of the work to be perfo

EAGLE Fort Riley KS W519TC-26-R-A054

W6QK ACC-RI

Maintenance, supply, and transportation services in Fort Riley, KS.

360-DAY DRY CARGO TIME CHARTER

MSC NORFOLK

Action Code: Pre-solicitation Date: 21 October 2026 Year: Fiscal Year 2027 Contracting Office Zip Code: 23511 Product or Service Code: V124- Transportation, Travel, & Relocation Services Contracting Office Address: 471 East C Street, Naval Station Norfolk, Norfolk, VA 23511 Subject: 360-day Dry Cargo Time Charter Proposed Solicitation Number: N3220527R6015 Closing Response Date: Monday, 02 November 2026 Contract Point of Contact or Contract Specialist: David Anaya at david.c.anaya.civ@us.navy.mil or 564-226-8419 Contract Award and Solicitation Number: TBD Contract Award Dollar Amount: TBD Contract Line Item Number: N/A Contract Award Date: TBA Contractor: TBD Description: This requirement is for one U.S. or foreign flag, general cargo Roll-on/Roll-off (RORO) or Lift-on/Lift-off (LOLO) vessel capable of transporting a minimum of 40,000 square feet of rolling stock and general cargo as described in the provided cargo list. The vessel will conduct port-to-port logistics operations in support of USMC missions and exercises in the Western Pacific region. Place of Contract Performance: The place/range of delivery and redelivery is Naha, Okinawa, Japan. The layday commences 28 December 2026 and cancels 06 January 2027, and the charter period is about 360 days. Set-aside Status: N/A. The decision to release this procurement as “Unrestricted” is based on responses received from a recent, sources sought notice for this service. All responsible sources may submit a proposal, which shall be considered by the agency. The Small Business Administration’s Procurement Center Representative concurred with this decision.

Aera of Interest (AoI) Equipment rental and Facility Support (CSO-W911KF25SC002)

W6QK ACC ANAD

The Government is issuing this Area of Interest (AOI) under the Anniston Army Depot (ANAD) Commercial Solutions Opening (CSO) W911KF-25-S-C0001-0002 process to identify and acquire commercial equipment rental and facility support solutions. Authorized under Section 803 of the FY2022 National Defense Authorization Act (10 USC 3458) and DFARS Subpart 212.70, this program allows the depot to rapidly secure commercial capabilities to meet operational needs. The objective of this AOI is to establish fast, reliable, and flexible access to a wide range of operational, construction, industrial, and heavy equipment. This access is critical to mitigating facility disruptions, preventing depot bottlenecks, and ensuring continuous maintenance and production readiness. This CSO AoI seeks innovative commercial solutions that meet the objectives detailed in Section XX below. In accordance with Revolutionary FAR Overhaul (RFO) Defense Federal Acquisition Regulation Supplement (DFARS) 212.70, the term 'innovative' is defined as any technology, process, or method, including research and development, that is new as of the date of proposal submission, or any new application of an existing technology, process, or method as of the proposal date. CSOs may only be used to obtain innovative solutions or potential capabilities that fulfill requirements, to close capability gaps or provide potential innovative technological advancements, and when meaningful proposals with varying Technical or scientific approaches can be reasonably anticipated. ADDED:A written solution must be sent via e-mail submission by 5:00 P.M (CDT); August 6, 2025 with subject line stating INNOVATIVE SOULTIONS for Specific AoI014 Equipment Rental to the below points of contact. SEE QUESTIONS AND ANSWERS POSTED OCTOBER 20, 2026 UPDATED the submission deadline.

Z--Asphalt Repair at Carl Sandburg Historic Site

IBC ACQ SVCS DIRECTORATE (00004)

Asphalt Repair at Carl Sandburg Historic Site

Z1DA--B170 Window Recaulking Services

256-NETWORK CONTRACT OFFICE 16 (36C256)

SF 30 CONTINUATION SHEET AMENDMENT 0002 Solicitation No.: 36C25627Q0022 Project: B170 Courtyard Window Re Caulk CAVHS Purpose of Amendment The purpose of this amendment is to provide the Government s responses to vendor questions submitted prior to the deadline. The following Questions & Answers are hereby incorporated into the solicitation. These clarifications do not change the scope of work unless explicitly stated. Only the Contracting Officer may authorize changes per FAR 52.212 4(c). SECTION: QUESTIONS & ANSWERS General Administrative Items Q1. Will the Government confirm that offers should be submitted via email to andrew.misfeldt@va.gov? A1. Yes. Submit one consolidated PDF ( 10MB), font Arial 11, in accordance with the solicitation instructions. Q2. Are there page limitations? A2. No page limits apply. The file-size limit of 10MB governs. Q3. Which form must be submitted SF 1449 or SF 1442? A3. Offerors shall submit a signed SF 1449. SF 1442 is not required. Evaluation Factors Q4. Please confirm the evaluation factors. A4. Evaluation consists of: Factor I Approach & Quality Management Factor II Professional Qualifications & Specialized Experience Factor III Past Performance Factor IV Price Factors I III are equal in importance and collectively approximately equal to Price. Q5. Does managing one subcontractor satisfy Past Performance requirements? A5. Yes, provided the offeror served as the prime contractor. Site Visit, Access, & Logistics Q6. Will there be a site visit? A6. A site visit was held on October 14, 2026. No additional site visits will be conducted. Q7. Please confirm logistical restrictions. A7. Approximate curtainwall height is 50 ft (verify independently). Elevator weight limit is 4,000 lbs. Courtyard door widths are 36 58 . Quiet hours are 2 3 PM and 10 PM 5 AM. Coordinate courtyard occupation with nursing staff. Q8. Are badges required? A8. Not for courtyard work during business hours. Badges are required for roof access. Delays caused by in

RFQ W912QR279A001 - Construction Manager at Risk (CMAR) Construction of Equipment Concentration Site, Fort Carson, Colorado

W072 ENDIST LOUISVILLE

***Amendment 0002 posted to PIEE on 21 October 2026. ***Amendment 0001 posted to PIEE on 15 October 2026. The U.S. Army Corps of Engineers, Louisville District is issuing this Request for Qualifications for the Construction of Equipment Concentration Site (ECS) at Fort Carson, Colorado. This project will be executed as a Construction Manager at Risk (CMAR) Other Transaction Agreement (OTA) under the statutory authority of 10 U.S.C. 2808a, Facility Construction or Repair. This approach will involve the general contractor during the design phase to provide feedback and input to the designer of record and the government on constructability, operability, cost, and value engineering on the design being developed.

PUMP,AXIAL PISTONS

DLA AVIATION AT HUNTSVILLE, AL

THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUEST FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the Defense Logistics Agency to identify potential manufacturing/supply sources, and if future efforts can be competitive or Set Aside for Small Business. The proposed North American Industry Classification Systems (NAICS) Code is 333996 which has a corresponding Size Standard of 1,250 employees. This SSS is to notify companies that the Defense Logistics Agency, Redstone Arsenal, Alabama, is seeking qualified sources for the acquisition of a PUMP,AXIAL PISTONS, NSN: 4320-01-118-4428, Part Number: 145HS140-10 in support of the CHINOOK weapon system. The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 6.302-1(a)(1) having only a limited number of responsible sources. The Government is interested in all businesses to include 8(a), small business and small disadvantaged business, Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns. All contractors must meet prequalification requirements in order to be registered as a potential source. Firms that possess the ability and can produce the required item(s) described above are encouraged to identify themselves. Contractors are encouraged to seek source approval in order to compete for future solicitations by visiting AvMC's public website: https://amrdec.army.afpims.mil/Directorates/STI/ The contractor shall be capable of successfully performing and complying with any and all special requirements in accordance with the terms and conditions set forth in the solicitation annotated above, at the unit prices established at time of a contract awar