Tenders

44--BAFFLE,FLUID COOLER,INDUSTRIAL

DLA TROOP SUPPORT

44--DEHYDRATOR UNIT,NONREACTIVATING

DLA TROOP SUPPORT

41--COOLING COIL,AIR,DU

DLA TROOP SUPPORT

41--COOLING COIL,CONTINUOUS TUBE,GRAVITY

DLA TROOP SUPPORT

FCI Berlin FY27 1ST QTR Kosher

FCI BERLIN

(i) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. (ii) Solicitation number 15B21826Q00000023 is issued as a request for quotation (RFQ), for Kosher . (iii) This solicitation incorporates provisions and clauses by reference. This solicitation document and incorporated provisions and clauses are those in effect through Revolutionary FAR Overhaul (RFO) . The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. To view all available rewritten FAR Parts and agency deviations, visit Revolutionary FAR Overhaul. (iv) This acquisition is 100% set-aside for small business concerns. The NAICS code for this requirement is 311999 , with a small business size standard of 700 employees. (v) A list of line-item number(s) and items, quantities, and units of measure (including option(s), if applicable). See attached requirements worksheets for a full description of items, quantities and units of measures for all the subsistence requirements. (vi) Description of requirements for the items to be acquired, including documentation supporting any brand name descriptions (see 12.102). See attached requirements worksheets for a full description of items, quantities and units of measures for all the subsistence requirements. (vii) Date(s) and place(s) of delivery and acceptance and F.O.B. point (see part 47). Deliveries will begin on October 1, 2026 and must be completed no later than October 15, 2026. All on-frozen, perishable foods must be delivered between 34 degrees F to 40 degrees F. All frozen foods must be delivered at 0 degrees F or below. Any products that indicate prior thawing will be refused. Delivery will be Freight on Board. Delivery address will be: FCI Berlin 1 Success Loop Road Berlin NH, 03570 (viii) FAR 52.212-1 , Instructio

DISA Command, Control, Communications, and Computers Enterprise (J6 C4E) Directorate – Pentagon (J6P) Security Support Services (J6 S3)

IT CONTRACTING DIVISION - PL83

The DISA J6 C4E is seeking information from potential sources to provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform Physical Security (PHYSEC), Personnel Security (PERSEC), Operations Security (OPSEC), Industrial Security (INDUSEC), and Special Access Program (SAP) Program Protection Plan (PPP) Services. The contractor must meet the security requirements and guidance as defined in the DoDM 5200v1-4; DoD 5220.22-M; DoD 5105.21; and other applicable federal regulations to ensure the security of J6 personnel, facilities, and programs to meet customer requirements.

Solicitation Notice - ARD-446 & ARD-863 Impulse Cartridges Amendment 3

FA8213 AFLCMC EBHK

Amendment 3 extends the submittal date to 10/30/2026 Amendment 2 extends the submittal date to 10/06/2026 This is a solicitation notice for an an-ticipated upcoming procurement for ARD 446-1B & 863-lAlW Impulse Cartridges. The government contemplates awarding one (1), five (5) year IDIQ contract. This requirement is anticipated to be other than full and open competition with only one responsible source, FAR 6.302-1 , Olin Winchester LLC (CAGE: 83WW3). Olin owns the technical data package for these items. All responsible sources may submit a capability statement, proposal, or quotation, which will be considered by the agency. This requirement includes qualification re-quirements in order to be eligible for award; offerors may inquire to the POC listed in this notice. The solicitation will be made available through Electronic Data Interchange (EDI) procedures. Solicitation will be posted to SAM.gov. The Product Service Code and North American Industry Classification System for this requirement are as follows: PSC: 1377 NAICS: 325920

FCI Berlin FY27 1ST QTR Meats

FCI BERLIN

(i) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. (ii) Solicitation number 15B21826Q00000021 is issued as a request for quotation (RFQ), for Meats . (iii) This solicitation incorporates provisions and clauses by reference. This solicitation document and incorporated provisions and clauses are those in effect through Revolutionary FAR Overhaul (RFO) . The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. To view all available rewritten FAR Parts and agency deviations, visit Revolutionary FAR Overhaul. (iv) This acquisition is 100% set-aside for small business concerns. The NAICS code for this requirement is 311999 , with a small business size standard of 700 employees. (v) A list of line-item number(s) and items, quantities, and units of measure (including option(s), if applicable). See attached requirements worksheets for a full description of items, quantities and units of measures for all the subsistence requirements. (vi) Description of requirements for the items to be acquired, including documentation supporting any brand name descriptions (see 12.102). See attached requirements worksheets for a full description of items, quantities and units of measures for all the subsistence requirements. (vii) Date(s) and place(s) of delivery and acceptance and F.O.B. point (see part 47). Deliveries will begin on October 1, 2026 and must be completed no later than October 15, 2026. All on-frozen, perishable foods must be delivered between 34 degrees F to 40 degrees F. All frozen foods must be delivered at 0 degrees F or below. Any products that indicate prior thawing will be refused. Delivery will be Freight on Board. Delivery address will be: FCI Berlin 1 Success Loop Road Berlin NH, 03570 (viii) FAR 52.212-1 , Instruction

SPECIAL MISSIONS TRAINING CENTER LIVE-FIRE MARITIME/URBAN TRAINING SYSTEM

Purpose: The U.S. Coast Guard (USCG) is issuing this Request for Information (RFI) for market-research purposes to identify capable sources; available commercial solutions; current industry practices; potential acquisition approaches; and relevant technical, schedule, lifecycle-support, and cost information for the design, engineering, fabrication, delivery, installation, integration, testing, certification/validation, and commissioning of a Joint Maritime Training Facility (JMTF) live-fire maritime/urban training system. Site Visit Location : Participants are requested to assemble at The Marine Corps Base Camp Lejeune Provost Marshal’s Office is located in Building 58 on Virginia Dare Drive, Camp Lejeune, North Carolina. Date : November 10, 2026 The contemplated requirement is for a complete and operational live-fire training system at the USCG Special Missions Training Center (SMTC), Courthouse Bay, Marine Corps Base Camp Lejeune, North Carolina. The facility must support realistic, modular, multi-level tactical training, including maritime interdiction, close-quarters combat, vertical access, breaching, and related joint-service mission sets. The system must integrate ballistic containment with maritime and urban training features and be suitable for repeated use in an outdoor coastal environment. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 236220. Disclaimer: There is no solicitation at this time. This RFI is not a request for proposals; submission of any information in response to this request is purely voluntary; the Government will not pay for any costs incurred nor is obligated to respond. All submissions become Government property and will not be returned. After reviewing RFI responses to this RFI, and if the USCG still plans to proceed with the acquisition, a solicitation announcement may be published on the Contract Opportunities (formerly FedBizOpps) website or distributed to contract holders

Shirley Creek Campground Improvements

USDA-FS, CSA SOUTHWEST 7

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 127EAX26Q0114 is issued as a Request for Quotation (RFQ) to furnish all labor, materials, tools, transportation, and necessary supervision to perform campground improvements at Shirley Creek Campground, on the Brownstown Ranger District of the Hoosier National Forest. This project will develop individual campsites at the existing Shirley Creek Campground. Work includes staking camping spurs from plans, stripping turf, earthwork, excavating campsite spurs and social areas to sub-grade, install and compact aggregate base course, install and compact aggregate surface course, grading to ensure proper drainage around spurs and social areas, and restoring areas disturbed by construction operations with topsoil, seed and mulch. Stripped turf and excess earthen materials are to be disposed of, by the contractor, to on-site locations within the campground which will be designated by the COR. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 238910 The small business size standard is $19M This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency. Questions shall be submitted via email to christopher.malley@usda.gov and are due no later than September 28, 2026, at 1:00 PM Eastern Time. This will ensure enough time to respond before the solicitation period ends. Please include the solicitation name and number as the subject line of the email. Amendment 0001 is added to extend the quote due date. The quote due date is extended to 10/14/2026 @ 1:00 PM ET to allow time for question responses to be posted. Amendment 0002 is added to extend the quote d

FMS_REPAIR_N0038326PR0R882

NAVSUP WEAPON SYSTEMS SUPPORT

This is a solicitation for the repair of 1 unit. OVEN,WARMING,ELECTRIC, P/N: 4313100-00-6600 NAVSUP Weapon Systems Support (NAVSUP WSS) Philadelphia is seeking eligible contractors to furnish effort including labor, material, and facilities as may be required to repair and/or modify the items as specified within this document. The Government intends to solicit only one source (Boeing) under the authority of FAR 6.302-1. The government does not possess (or cannot provide) the data necessary to perform the required repairs or manufacture of the items. All responsible sources may identify their interest and provide capability statements in response to the notice. This notice of intent is not a request for competitive proposals. However, all proposals received within 5 days after the publication of this solicitation notice will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Source Approval is required. WSS will not delay award while Source Approval is pending. The time for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in the NAVSUP-WSS Source Approval Information Brochure for Repair. Additional information for submitting a Source Approval Request package can be obtained at: Provide labor, materials, and parts as may be required to restore the following government owned articles to operational conditions. 0001 OVEN,WARMING,ELECTRIC P/N: 4313100-00-6600 NSN: 7310171251500 Email: sarah.l.austin10.civ@us.navy.mil

Infantry Platoon Battle Course (IPBC) Fort Bragg, North Carolina

W074 ENDIST SAVANNAH

Project Number: 86262Infantry Platoon Battle Course (IPBC) Fort Bragg, North Carolina. The U.S. Army Corps of Engineers (USACE) Savannah District is issuing an Invitation for Bid (IFB) W912HN26BA005 for project number: 86262 Infantry Platoon Battle Course (IPBC) Fort Bragg, North Carolina. Type of Contract and NAICS: This Acquisition is solicited using FAR Part 14, Sealed Bid Procedures for one (1) Firm-Fixed-Price (FFP) contract. The North American Industry Classification System (NAICS) code is 236220- Commercial and Industrial Building Construction, with size standard of $45M.Type of Set-Aside: This acquisition is being offered under Full and Open Competition using the NAICS code identified above. Construction Magnitude: In accordance with DFARS 236.204, the magnitude of this construction project is anticipated to be between $10M-$25M. Bid Due Date: 15 June 2026 - 11:00am EDT via PIEE. Site Visit: 27 May 2026 - 09:00am EDT. Period of Performance: The period of performance including all options is 720 Calendar Days after the issuance of the notice to proceed. Project scope: This requirement is for the construction of a standard Automated Infantry Platoon Battle Course (IPBC). Primary facilities include the IPBC, small arms range operations control area, control tower (small), operations/storage building, covered bleacher, covered mess, ammunition breakdown building, building information systems, and latrine pads. Post Construction Award Services (PCAS) will be provided. Cybersecurity Measures will be incorporated into this project. Sustainability/energy measures will be provided. Supporting facilities include electric service, site improvements, and information systems. Project files are Portable Document Format (PDF) files and can be viewed, navigated, or printed using Adobe Acrobat Reader. Contractors must register at the SAM website at https://sam.gov to download the solicitation for this project. If/when issued, Amendments will be posted to the above-referenced

Office Space For US Army COE - Lenoir City, TN Area

W072 ENDIST NASHVILLE

Area Lenor City Martel Farragut Cedar Bluff (no further than one mile east of Hwy. 62/ Hwy. 95 junction) Wood Creek West Oak Ridge (preferably no further than one mile east of the Hwy.62/ Hwy. 95 junction) Scarboro Hardin Valley Office Space Approximately 900 to 1,525 SF Approximately 6-8 parking stalls for public Within 25 mile radius of Lenoir City Area Infrastructure for broadband / fiber optic service It would be ideal if the facility had:At least one office (we will build if needed) Hardwall Offices Conference Room Restrooms Break/Lunch Room

PN: 438-21-403, Renovate First Floor Kitchen (SF)

NETWORK CONTRACT OFFICE 23 (36C263)

438-21-403, Renovate First Floor Kitchen Amendment 0002 - revise the bid opening date from 20 October 2026 at 1:00 PM (CT) to 3 November 2026 at 1:00 PM (CT) and provide pre-bid site visit sign in sheets.

GSAR 538.7104-3 Sole source justification

ACQUISITIONS - AQM MOMENTUM

The U.S. Department of State (DoS) Bureau of Global Acquisitions (GA) proposes to issue a cost extension of mission critical services under the Program Management Support Services Blanket Purchase Agreement (PMSS BPA, agreement no.: 19AQMM19A0280) with Deloitte Consulting, on behalf of the Center for Analytics (CfA) and the Division for Counter Threat Finance and Sanctions (TFS). The extension is for one year and two six-month option periods added to the current performance period of the BPA Call with Deloitte Consulting (call No.:19AQMM21F7091) under the PMSS BPA. The additional year with two six-month option periods, if exercised, will extend the period of performance of the BPA Call with Deloitte under the PMSS BPA from September 30, 2026, until September 29, 2028. If the two six-month option periods are not exercised, the period of performance will extend by one year only, to September 29, 2027.

6973GH-26-R-00177 - MINIATURE UPS KITS – SIR

6973GH FRANCHISE ACQUISITION SVCS

SOLICITATION FOR THE ACQUISITION OF 6973GH-26-R-00177 MINIATURE UPS KITS MULTI-YEAR CONTRACT, IN SUPPORT OF CBP DETAILED IN THIS ANNOUNCEMENT FOR THE FAA. NO PHONE CALLS PLEASE. ALL QUESTIONS MUST BE IN WRITING AND EMAILED TO THE CONTRACTING SPECIALIST. CONTACT INFORMATION BELOW. The purpose of this announcement is to inform industry of the basis for the FAA's decision to contract, in accordance with Section 3.2.2.4 of the Federal Aviation Administration (FAA) Acquisition Management System (AMS), brand name products detailed in this announcement for the Customs and Border Protection’s (CBP) Remote Video Surveillance System Legacy (RVSS-L) program and in Section B of the attached solicitation. The FAA’s desire and intent are to pursue a competitive award resulting in a single purchase order, based on the lowest price, technically acceptable responsible offer per the Terms and Conditions of the solicitation. The signed solicitation must be completed and submitted to the contracting officer by the deadline stated in the solicitation for it to be considered for review. The FAA intends to award a single purchase order for Marathon Power equipment listed below: Line Description Quantity 00001 Period 1 (12 months) 600 00002 Shipping 600 00003 Period 2 (12 months) 600 00004 Shipping 600 00005 Period 3 (12 months) 600 00006 Shipping 600 00007 Period 4 (12 months) 600 00008 Shipping 600 00009 Period 5 (12 months) 600 00010 Shipping 600 Marathon Power is the Original Equipment Manufacturer (OEM) of the required equipment and is the only manufacturer providing Miniature Uninterruptible Power Supply (mUPS) Supply Kits, Part number: UP-SDRU-0500-H1-KIT, in support of AJM-5 Telecommunications Integrated Services (TIS). The proposed principle North American Industry Classification System (NAICS) code for this effort is 221122 - Electric Power Distribution, with a Small Business Size Standard of 1,100. All responses to this announcement should be addressed via email to the Contracti

Brooklyn, NY Rugby Station HVAC Upgrade B54943

SUPPLIES MATERIAL MGMT

Dock-side (DS): USCGC KIMBALL Quarter 3 FY27 Repair

The U.S. Coast Guard is looking for sources which would be interested in performing dockside repairs for Coast Guard Cutter KIMBALL (WMSL 756). The performance period of this upcoming dockside is 2 June – 16 August 2027. It is anticipated requests for quotes will be issued by 24 December 2026 and the contract would be awarded around 3 April 2027. Coast Guard Cutter KIMBALL is a 418’ Legend-class ship home ported in Honolulu, HI. Following is the draft specification with a list of the 19 work items. All repairs will take place at the cutter’s homeport. Companies which would be interested in submitting a proposal for this requirement should reply to this sources sought notice noting their business size/status such as large business, small business, HUBZone, Service-Disabled Veteran-owned, Women Owned Small Business etc…. Further if there are no past performance evaluations on file in the Past Performance Information System Retrieval database, contractors should provide a couple past performance references including the following information: contract numbers, project titles, dollar amounts, points of contact and telephone numbers. Replies should be sent by 26 October 2026, 2:00 pm Pacific Time to: Andrew Jacobs, Contracting Officer at andrew.g.jacobs@uscg.mil and CWO Josh Smith at joshua.b.smith@uscg.mil. Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted. After the determination a request for quote will be posted on www.sam.gov. The NAICS Code is 336611. The small business size standard is less than 1300 employees. Contractors are reminded that in the case of a HUB Zone set-aside, FAR 52.219-3, "Notice of HUBZone Set-Aside or Sole Source Award" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small businesses. Contractors are also reminded that in the case of a Service-Disabled Vet

SWIVEL SHACKLE ASSEMBLY

W6QM MICC-FT DRUM

TX FW LGA 10(5) Steve Thompson Wildlife Drive

6982AF CENTRAL FEDERAL LANDS DIVISI

PROJECT NUMBER: TX FW LGA 10(5) PROJECT NAME: Steve Thompson Wildlife Drive PROJECT DESCRIPTION: The proposed project is in Laguna Atascosa National Wildlife Refuge in Cameron County, Texas approximately 25 miles east of Harlingen, Texas. The existing terrain is flat. SCOPE OF THE WORK: The proposed project includes full depth reclamation of existing driving surface which includes chip seal material, and existing gravel. After completing full-depth reclamation new aggregate surface course will be added to create a driving surface that has a consistent width. The project also includes installation of aluminum gate and a small concrete pad and safety improvement signs and speed bumps. The project includes three (3) alternate bid items for Aggregate Surface Course (TON) with one (1) being awarded. Alternate 1: 2-inches of aggregate surface course added to Bayside Drive and Steve Thompson Wildlife Drive and terminating at Renee’s Overlook Parking Area. Alternate 2: 2-inches of aggregate surface course added to Bayside Drive and Steve Thompson Wildlife Drive. Alternate 3: 3-inches of aggregate surface course added to Bayside Drive and Steve Thompson Wildlife Drive and terminating at Renee’s Overlook Parking Area.

Veterinary Services

USCIS FY27 1st Quarter Engagement with Industry

U.S. CITIZENSHIP AND IMMIGRATION SERVICES

10/14/26 - UPDATED TO PROVIDE DRAFT PRESENTATION SLIDES (IN DOCUMENTS SECTION BELOW). ====== NOTICE: DHS strictly prohibits the use of commercial AI tools for DHS and USCIS meetings and communications. This includes third-party AI bots. Bots or unknown callers (such as “Name Notetaker” or “Name.ai”) will NOT be allowed to participate and will be removed upon discovery. Please ensure that only registered participants attend in person. United States Citizenship and Immigration Services (USCIS), Office of Contracting (OCON), will host its Fiscal Year (FY) 2027 First Quarter Engagement with Industry on October 27, 2026, beginning at 1:00 p.m. Eastern Time. These quarterly engagements provide an opportunity for open dialogue between USCIS and industry regarding current and anticipated procurement requirements. The purpose of this event is to share the most current procurement-related information available for USCIS requirements. To participate as an attendee, please self-register using the Microsoft Teams link below: Microsoft Teams meeting https://events.gcc.teams.microsoft.com/event/74f50b56-1413-4370-8199-58b2c86f4a98@5e41ee74-0d2d-4a72-8975-998ce83205eb?source=copyLinkLegacyShareLinkDialog USCIS uses Microsoft Teams to conduct these industry engagements. Attendees will be muted upon entry, and attendee video will be disabled. Only presenters will be on video. USCIS plans to record this event and post the recording on its YouTube channel after the event. Once available, the recording link will be posted as an update to this SAM.gov announcement. Format and Questions The event will be organized by execution division and then by the Associate Chief portfolio supporting each program office. Presenters will brief the requirements within each portfolio, including new information and updates, as applicable. Following each portfolio briefing, USCIS will address questions related to that portfolio. Attendees may submit questions through the Microsoft Teams Q&A feature or ask

FCI Berlin FY27 1ST QTR Subsistence

FCI BERLIN

(i) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. (ii) Solicitation number 15B21826Q00000022 is issued as a request for quotation (RFQ), for Subsistence . (iii) This solicitation incorporates provisions and clauses by reference. This solicitation document and incorporated provisions and clauses are those in effect through Revolutionary FAR Overhaul (RFO) . The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. To view all available rewritten FAR Parts and agency deviations, visit Revolutionary FAR Overhaul. (iv) This acquisition is 100% set-aside for small business concerns. The NAICS code for this requirement is 311999 , with a small business size standard of 700 employees. (v) A list of line-item number(s) and items, quantities, and units of measure (including option(s), if applicable). See attached requirements worksheets for a full description of items, quantities and units of measures for all the subsistence requirements. (vi) Description of requirements for the items to be acquired, including documentation supporting any brand name descriptions (see 12.102). See attached requirements worksheets for a full description of items, quantities and units of measures for all the subsistence requirements. (vii) Date(s) and place(s) of delivery and acceptance and F.O.B. point (see part 47). Deliveries will begin on October 1, 2026 and must be completed no later than October 15, 2026. All on-frozen, perishable foods must be delivered between 34 degrees F to 40 degrees F. All frozen foods must be delivered at 0 degrees F or below. Any products that indicate prior thawing will be refused. **NOTE: ALL SUBSISTENCE MUST HAVE A "BEST BY DATE" OR EXPIRATION DATE NO EARLIER THAN APRIL 30, 2027. DELIVERIES WILL BE REFUSED IF THE

AEGIS Double Duty Cross Field Amplifier (DD CFA) Microwave Tubes (MWT) with Gold Tube Testing- Production, Evaluation, and Rebuild

NSWC CRANE

Naval Surface Warfare Center (NSWC), Crane Division, has a requirement for production, repairs, rebuilds, evaluations, gold tube and phase standard testing, Government Furnished Equipment (GFE) maintenance, and engineering support of Double Duty (DD) Cross Field Amplifiers (CFAs). The proposed contract action is for the supplies and services for which the Government intends to solicit and negotiate with limited sources, Communications & Power Industries LLC (CPI), Beverly, MA and Stellant Systems Inc, Williamsport, PA, under the authority of FAR 6.103-1(b) One responsible source. Agencies may contract without providing for full and open competition when the supplies or services required by the agency are available from only one responsible source and no other type of supplies or services will satisfy agency requirements. For DoD, NASA, and the Coast Guard, this authority extends to situations where only a limited number of responsible sources can satisfy agency requirements. The requirement is being solicited on a limited source basis because of the lack of sufficient technical data, duplicative cost to the Government that is not expected to be recovered through competition, and the unacceptable delays in fulfilling the agency requirement through any other source. All responsible sources may submit a proposal, as appropriate, which will be considered by the agency. However, a determination by the Government not to compete this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of re-evaluating the justification for sole source or limitation of sources and making a determination to change the acquisition strategy to a competitive procurement. The Solicitation and amendments for this limited source action will not be posted to sam.gov and are available only from the POC identified below. Contractors must be properly registered in the Syst