Tenders

CO NP ROMO 407(1) Holzwarth Culvert

6982AF CENTRAL FEDERAL LANDS DIVISI

SOLICITATION ID: 6982AF27B000004 PROJECT NUMBER: CO FTNP ROMO 407(1) PROJECT NAME: Holzwarth Culvert PROJECT DESCRIPTION: This project will replace the deficient Holzwarth Culvert (Structure No. 1520-029S), a six-barrel corrugated metal arch pipe culvert on the Holzwarth Access Road with a steel girder bridge. Located in Rocky Mountain National Park, approximately nine miles north of Grand Lake, CO, along US HWY 34 at an elevation of 8,900 feet, the culvert conveys flow from the Colorado River and provides access to the Holzwarth Historic Site. The purpose of this project is to prevent future roadway damage and flooding while maintaining access to employee housing, the historic site, and National Park Service and Forest Service recreation opportunities. SCOPE OF THE WORK: The project will consist of removal of the existing six barrel culvert and construction of a new steel girder bridge with a cast in place concrete deck. New bridge abutments and micropiles. Temporary stream diversion and riprap. New aggregate roadway surfacing. Relocation of an existing electrical line. Relocation of existing historic head gates into a new concrete slab. The site is accessible on foot a quarter mile past the locked gate at the south end of the Holzwarth Historic Site Parking Lot and along the Holzwarth Culvert Access Road. The Holzwarth Culvert Access Road is approximately 13’ wide with tight turns. Temporary widening will be necessary to prevent truck off tracking on to sensitive environmental resources. A temporary truck turnaround will also be necessary as no construction access is allowed more than 100’ west of the bridge. PRINCIPAL WORK ITEMS: 20304-2000 Removal of Bridge: 1 EACH 30202-2000 Roadway Aggregate, Method 2: 120 TON 55504-0000 Prefabricated Steel Bridge (10’ wide x 48’ long modular steel vehicular bridge): 1 LPSM 56701-0000 Micropile (8.68” dia.): 180 LNFT 62801-0000 Temporary Stream Diversion: 1 LPSM ANTICIPATED SCHEDULE: Advertisement – September 2026 Award – Dece

CO BR UCPO Blue Mesa Road(1) Blue Mesa Road

6982AF CENTRAL FEDERAL LANDS DIVISI

THIS IS NOT A REQUEST FOR BID – PLANS AND SPECIFICATIONS ARE NOT AVAILABLE. PROJECT NAME: CO BR UCPO Blue Mesa Road(1) Blue Mesa Road Blue Mesa Road is a 1.44-mile corridor located in Gunnison County, CO and provides access to the Bureau of Reclamation (BOR) Power Plant and Pine Creek Trailhead recreational activities on the Curecanti National Recreational Area. SCOPE OF THE WORK Schedule A: Proposed rehabilitation of 0.86 miles to replace existing gravel roadway with asphalt concrete pavement. Reconstruction/Rehabilitation, as needed, for 0.24 miles of existing asphalt to incorporate raising roadway profile at US 50 intersection, drainage improvements including replacement and/or lining of damaged culverts, relocation of traffic counters, formalize parking area with ADA stalls, signing and striping, ditch reconditioning, rockfall mitigation. Option X: Proposed rehabilitation of 0.34 miles to replace existing gravel roadway with asphalt concrete pavement from BOR gate to Blue Mesa Power Plant, drainage improvements to include replacement of damaged culverts, signing and striping, ditch reconditioning, installation of 6” electrical conduit for purposes of future automatic gate installation. Option Y: Proposed 6-inch electric conduit installation and 2 ft x 2 ft max trenching for 2,215 LF miles from the electric security gate to The Blue Mesa Power Plant. Conduit will provide future access for BOR to provide electric connection to security gate. PRINCIPAL WORK ITEMS: Schedule A: 15225-0000 Slope, Reference, and Clearing and Grubbing Control: 1.051 MILE 20301-1900 Removal of Pipe Culvert: 5 EACH 20401-0000 Roadway Excavation: 1,500 CU YD 30201-2000 Roadway Aggregate, Method 2: 2,500 CU YD 30302-1000 Ditch Reconditioning: 3,280 LN FT 40301-0100 Asphalt Concrete Pavement, Type 1: 2,500 TON 60103-0140 Concrete, Headwall for 24-Inch Pipe Culvert (L-Shaped): 3 EACH 60103-0160 Concrete, Headwall for 30-Inch Pipe Culvert: 1 EACH 60103-0280 Concrete, Headwall for 66-Inch Pipe

F110 NOZZLE TURBINE AIR, NSN: 2840-01-289-8529PR, PN: 952M21G02

DLA AVIATION AT OKLAHOMA CITY, OK

Sole Source Acquisition.

Facility MGT Contracting Division (PQFA) Recurring Service 2026 Industry Day

The purpose of this Notice is to announce Industry Day for upcoming contracts in Facility Management Contracting Division (PQFA) Facilities across Colorado, South Dakota, Alaska, Washington, Wyoming, Utah, Montana and Idaho. Also including a brief presentation from Facility Operation Division and the Facility Management Contracting Division (Zones 5, 6 and 7)

EDRM - Enhanced Drogue Rocket Motor

FA8213 AFLCMC EBHK

B--ANALYSIS OF PBT SAMPLES

ANALYSIS OF PBT SAMPLES

Medtronic cardiovascular "procedural packages"

DLA TROOP SUPPORT

This is a sources sought notice. The Defense Logistics Agency (DLA) Troop Support is seeking sources capable of providing Medtronic cardiovascular "procedural packages". The "procedural package" includes the cardiovascular products and ancillary accessories (such as needles for entry and guidewire) that are necessary for the physician to perform the cardiovascular surgeries. The product mix that makes up the "procedural package" varies based on the individual needs of the patient. All products must be approved by the Food and Drug Administration (FDA). The products that make up the “procedural package” must be delivered Just-In-Time (JIT), Direct Vendor Delivery (DVD) and Consignment. Under the JIT delivery method, the Medical Treatment Facility (MTF) calls the manufacturer’s field representative who carries the products into the MTF just-in-time for the surgery. The manufacturer’s sales representative may bring many sizes and types of implants and other auxiliary products to the surgery along with the instrumentation sets. Under the DVD method an order for products is placed through ECAT and the products are delivered direct to the customer via any transportation carrier. Under the consignment method, a Medical Treatment Facility (MTF) will have the products that make up the procedural package consigned to their facility. At the request of the MTF’s, the manufacturer is required to have a qualified representative on site at the MTF’s within the timeframe specified by the facility necessary to meet their requirements. The manufacturer’s representative provides technical advice and guidance to the physicians before, during and after implantation. Furthermore, technical support is available twenty-four (24) hours a day, seven (7) days a week. This is a Request For Information (RFI) and does not commit the U.S. Government to issue a solicitation, make an award or pay any costs associated with responding to this announcement. All submitted information shall remain with

Notice of Intent to Institute of Civil Engineers (ICE) Emerald Journal Subscription

W2R2 USA ENGR R AND D CTR

The US Army Corps of Engineers, Engineer Research and Development Center (ERDC), intends to issue an award to Emerald Publishing Limited, Floor 5, NorthSpring, 21-23 Wellington Street Leeds, LS1 4DL, United Kingdom, a sole source basis utilizing Simplified Acquisition Procedures as outlined in FAR Part 12. The requirement is for multiple physical site licenses for the following journals: ICE Publishing journals. The license is propriety to Emerald Group Publishing Limited; Emerald Group Publishing Limited is the sole source provider of the current content. The ICE Publishing electronic titles are the following: ICE Publishing Current Journals Collection ICE Publishing Science Journals Collection The NAICS code for this requirement is 513120 with a size standard of 1000 employees. This notice is not a request for competitive quotes or proposals. A solicitation will not be issued; however, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The information submitted must be provided in sufficient detail to demonstrate the vendors ability to fulfill this requirement. The contractor must also provide a description of their past experience in fulfilling requirements which are the same or similar to this requirement and references for each. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this requirement on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. Interested parties may submit any information for consideration by the Government to Elizabeth.D.Washington@usace.army.mil. The notice number shall be included in the subject line of e-mail submissions. Responses should be received by date specified above.

54--IA-NEAL SMITH NWR-TEMP MODULAR OFFICE

IA-NEAL SMITH NWR-TEMP MODULAR OFFICE

Tracking Layer Tranche 4 On-orbit Demonstrations and Operations Request for Information

FA2401 SPACE DEVELOPMENT AGENCY SDA

The Space Development Agency (SDA) is seeking information to inform future solicitations and reduce risk associated with the Proliferated Warfighter Space Architecture (PWSA) architecture acquisition and integration plans. This RFI seeks industry feedback on enhancements to its baseline Tracking Layer’s Resilient MWTD mission payloads and architecture, as well as new mission capabilities that can help the PWSA provide enhanced mission performance to detect and track more challenging targets across their full flight trajectories. Additional details, mission objectives, and architecture information are available upon request. Responses to this RFI will specifically inform SDA’s scope and design of possible short-term on-orbit demonstration(s) and future Tracking Layer tranches. Following this RFI and feedback phase, SDA plans to announce a Tranche 4 solicitation that includes both production contracts and partnership opportunities for rapid prototyping and flight demonstration(s) of new mission payloads. This Request for Information consists of Controlled Unclassified Information (CUI) and a classified addendum. Interested parties must contact SDA to receive the documents. Please send an email to ussf.pentagon ussf.pentagon.sda.mesg.sda-sn-27-0003-mbx@mail.mil with the subject line “TRKT4 RFI Content Request.” Please include: • Company Name: • Cage Code: • City, State of Company location • Email address: • JWICS email: (for classified documents)

EMALS/AAG Multi-Engineering Change Proposal (ECP) Kit Procurement (RFP Kittle)

NAVAL AIR SYSTEMS COMMAND

The Naval Air Systems Command (NAVAIR), NAS Patuxent River, MD, intends to negotiate and award an order to General Atomics (GA), San Diego, CA, under an existing Basic Ordering Agreement (BOA), N00019-26-G-1008 for the implementation of multiple Electromagnetic Aircraft Launch System (EMALS)/ Advanced Arresting Gear (AAG) Engineering Change Proposals (ECPs) including kit production and delivery of shipsets for CVN-78 and CVN-79. This effort entails all necessary tasks to procure, test, and integrate EMALS and AAG components required for installation on CVN 78 and CVN 79. THIS IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. This acquisition is being pursued on a sole source basis under the statutory authority of Title 10, U.S.C. 3204(a)(1), as implemented Federal Acquisition Regulation (FAR) 6.103-1, “Only one responsible source and no other supplies or services will satisfy agency requirements”. As the sole designer, developer, and manufacturer of EMALS and AAG, GA is the only responsible source with the technical expertise, technical data, and in-depth knowledge to fulfill the EMALS/AAG production requirements. Award to another source would result in unacceptable delays in fulfilling the agency’s requirements. Further, NAVAIR does not have an adequate technical data package nor sufficient license rights to the technical data to support a competitive procurement. Companies interested in subcontracting opportunities should directly contact Zach Baur, Small Business Liaison for General Atomics via e-mail: Zachary.Baur@ga.com, or Phone: 619-715-7890.

New Mexico Army National Guard (NMARNG) Dining Facility (DFAC) Food Services

W7NQ USPFO ACTIVITY NM ARNG

1. Introduction This is a Sources Sought Notice / Request for Information (RFI) issued solely for market research and acquisition planning purposes. The New Mexico Army National Guard (NMARNG) is conducting market research to determine the availability, interest, and technical capability of qualified businesses—including Small Businesses, 8(a), HUBZone, Service-Disabled Veteran-Owned Small Businesses (SDVOSB), and Women-Owned Small Businesses (WOSB)—to provide turnkey Dining Facility (DFAC) Food Services at the Santa Fe Training Complex. DISCLAIMER: This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), Invitation for Bids (IFB), or an obligation or commitment by the Government to issue a solicitation or make an award. The Government will not reimburse respondents for any costs incurred in preparing or submitting responses to this notice. All submissions become the property of the Government and will be used strictly for market research and acquisition strategy formulation. Primary Focus – Industry Feedback on Firm-Fixed-Price (FFP) CLIN Structuring & Billing: A primary objective of this Sources Sought notice is to solicit industry feedback and market expertise regarding the most effective, commercially viable, and equitable Firm-Fixed-Price (FFP) Contract Line Item Number (CLIN) structures and billing methodologies for Dining Facility (DFAC) Service Attendant operations. The Government intends to award a Firm-Fixed-Price contract and is seeking insights from experienced contractors on historical best practices, fixed-unit pricing models, and administrative efficiencies to inform our future acquisition strategy. Specifically, respondents are requested to provide feedback on how routine attendant duties, fluctuating patron volumes, operating hours, and surge requirements can best be captured within an FFP pricing schedule (such as monthly flat rates, tiered fixed pricing, or fixed unit prices) to minimize administrative burden and

5180001261769, Tool Kit, Screw Thread Insert

GSA/FAS/GSS/QSCB, SUPPLY CHAIN MANAGEMENT CONTRACTING DIVISION

The General Services Administration/Direct Demand Contract Solutions Division (GSA/DDD), is posting a Request for Quote (RFQ) for NSN 5180001261769, Brand Name or Equal. Vendor's quoting must be registered to receive Purchase Orders via EDI or through OMS Vendor Portal. All delivery locations will be within the Continental United States. Full delivery addresses will be provided on awarded Purchase Orders. Prices are requested on a FOB Destination basis with the vendor's best delivery lead time. This is NOT set aside exclusively for Small Business IAW FAR 19.201 (GSA Class Deviation RFO-2025-19). A vendor meeting all administrative compliance requirements in Section 3 of the RFQ (submitted by the solicitation close date and time) will move forward to the final evaluation factor: Low Price. If any required documents are not submitted or required field left blank on pages 1 and 2 of the RFQ document including the Section 3 questions or if the completion of required clauses and provision fill-ins are not made (as applicable), further consideration for award will not be made. Please find attached the RFQ and MIL Standard 129 forms. Please contact amanda.acosta@gsa.gov with any questions.

Notice of Intent to Sole Source - Post-delivery support of developed space and ground hardware and software

DEPT OF THE AIR FORCE

NOTICE OF INTENT TO SOLE SOURCE General Information Notice Type: Special Notice Contracting Office: Space RCO Title: Notice of Intent to Sole Source - Post-delivery support of developed space and ground hardware and software. Response Date: No later than 1500 MST on 04 NOV 2026 NAICS Code: 541715 Product Service Code (PSC): DA10 Description: The Space Rapid Capabilities Office (Space RCO) intends to solicit and negotiate a contract on a sole-source basis with Systems & Technology Research, LLC, Woburn, Massachusetts under the statutory authority of 10 U.S.C. 3204(a)(1) as implemented by RFO 6.103-1, Only one responsible source and no other supplies or services will satisfy agency requirements. Requirement Description: Space RCO requires post-delivery support of developed space and ground hardware and software. This effort will continue to provide systems engineering support for verification and validation of interface requirements, hardware integration and test, and on-orbit troubleshooting as the payloads are integrated onto host vehicles, tested, launched, and perform on-orbit. The instant action is to procure services to transition a prototype ground system to a full operational capability. The requirements outline a need for software development and integration expertise to enhance the existing system with a new graphical user interface (GUI), integrate mission-unique software (MUS), improve telemetry processing and data handling, and ensure the system can support long-term, 24/7 operations. The effort also requires integration with the R2C2 Acme Ground Segment, maintaining external connections, development on cloud infrastructure, and adherence to cybersecurity and systems engineering best practices. Full operational capability should be obtained within 6 months from ATP. Projected Base and Option Year CLIN Structure: ​ CLIN 0001 (CPFF) - 2-Year Base, 3 (three) 1-Year Options. CLINs 0003, 0004 (Cost Only, No Fee) - 2-Year Base, 3 (three) 1-Year Options. ​CLIN 0

MACH1_AOI_Military Working Dog Facility_ Vandenberg Space Force_LOE 1 and LOE 2

FA8903 772 ESS PK

This Area of Interest (AOI) is published under the Modernized Agile Construction Horizons (MACH1) Umbrella Program Notice. All submissions must adhere to the procedures and guidelines outlined in the parent MACH1 framework document unless otherwise tailored herein. Any resulting agreement will be an Other Transaction Agreement (OTA) executed under the statutory authority of 10 U.S.C. 2808a. The 772nd Enterprise Sourcing Squadron (772 ESS) is is executing a Progressive Design-Build (PDB) project to renovate existing military working dog (MWD) facilities and construct a new addition at Vandenberg Space Force Base (SFB), California. Under this agreement, the selected contractor will execute both the progressive design and physical construction to deliver a fully functional, code-compliant compound (Project Number: XUMU171121C). The current MWD kennel and admin facilities (Buildings 6444 and 6447) at Vandenberg SFB fail quarterly inspections and contain critical safety hazards that endanger military personnel and canine assets. Transitioning to a Progressive Design-Build (PDB) model is critical to eliminate traditional design-bid-build delays, rapidly deliver compliant spaces, and preserve the security mission of the 30th Space Wing. There are (2) two distinct lines of effort (LOEs) for this requirement: LOE 1 - Design & Planning (Design) and LOE 2 - Physical Construction. See attachment PDF: MACH1_AOI_FA890327OT005_Military_Working_Dog_Facility_Vandenberg_ 20 Oct 26.pdf

Corneal Analyzer OPD-Scan III Wavefront Aberrometer

RPO WEST (36C24W)

This will be a Firm Fixed Price requirement and for market research. DISCLAIMER This Sources Sought is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this Sources Sought is that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this Sources Sought. Department of Veterans Affairs Veterans Health Administration (VHA) is publishing a Sources Sought Notice for the procurement of a Corneal Analyzer - OPD Scan III Visual System. This is a Sources Sought notice and not a request for quotes. This request is solely for the purpose of conducting market research to enhance VHA s understanding of your company s offered services and capabilities. The Government will not pay any costs for responses submitted in response to this Source Sought Notice. This Sources Sought notice provides an opportunity for respondents to submit their capability and availability to provide the service requirement described below. Vendors are being invited to submit information relative to their potential to fulfill this requirement, in the form of a capability response that addresses the specific requirement identified in this Sources Sought. This Sources Sought is to facilitate the Contracting Officer a review of the market base, for acquisition planning, size determination, and procurement strategy. A solicitation will be posted at a later date. Please subject Title the email as follows: RFI 36C24W27Q0010 Corneal Analyzer - OPD Scan III Visual System General Requirements: Brand name or equal this analyzer is needed for the San Francisco VA Health Care System, San Francisco, CA 94121 in accordance with the following requirements and stated in the Statement of Work (SOW): The Department o

INSCOM G-2 Access Control and Security Escorts (ACES)

W6QK INSCOM BELVOIR

Amendment 0001 – Solicitation W50NH9‑26‑R‑A028 published on October 15, 2026. Title: Amendment Notice – Administrative, Technical, and Pricing Updates; Closure of Q&A Period Classification: 8(a) Small Business Set‑Aside Contract Type: Firm Fixed Price / Labor Hours 1. Purpose of Amendment 0001 Amendment 0001 to Solicitation W50NH9‑26‑R‑A028 is hereby issued to modify various administrative, technical, and pricing elements of the solicitation. The amendment does not alter the core terms, conditions, or overall acquisition strategy. The official Question and Answer period is now closed ; no additional vendor inquiries will be accepted or responded to. Government Responses to Vendor Questions Incorporated: All official Government responses to vendor inquiries are included in this amendment and are considered part of the solicitation. All revised solicitation documents issued under Amendment 0001 are labeled “Revision 0001.” Proposal Submission Deadline Extended: The due date for receipt of proposals is extended to 18 November 2026 at 3:00 PM EST .

59--RESISTOR,VARIABLE,NONWIRE WOUND,NONP

DLA LAND AND MARITIME

Indefinite Delivery Contract: Estimated quantity 623.000 ; Not to Exceed 350,000.00

30--GEAR ASSEMBLY,SPEED DECREASER

DLA LAND AND MARITIME

Indefinite Delivery Contract: Estimated quantity 14.000 ; Not to Exceed 350,000.00

47--HOSE ASSEMBLY,NONME

DLA LAND AND MARITIME

47--HOSE ASSEMBLY,NONMETALLIC

DLA LAND AND MARITIME

Indefinite Delivery Contract: Estimated quantity 181.000 ; Not to Exceed 350,000.00

30--SWASHPLATE,CONTROLLABLE

DLA LAND AND MARITIME

Indefinite Delivery Contract: Estimated quantity 1.000 ; Not to Exceed 350,000.00

29--FILTER ELEMENT,FLUID

DLA LAND AND MARITIME

25--CUSHION,SEAT,VEHICULAR

DLA LAND AND MARITIME