Tenders

42--LIFE PRESERVER,VEST

DLA TROOP SUPPORT

OK FW TSM 10(1) NFH Entrance Road and Parking Improvements

6982AF CENTRAL FEDERAL LANDS DIVISI

PROJECT NUMBER: OK FW TSM 10(1) PROJECT NAME: NFH Entrance Road and Parking Improvements PROJECT DESCRIPTION: The Tishomingo National Fish Hatchery (NFH) is in south-central Oklahoma off SH 7 on a 220-acre U.S. Fish and Wildlife Service (FWS) facility approximately 8 miles northwest of the Town of Tishomingo. The project will address deteriorated pavement for the entrance loop, adding a small parking area at the northeast corner of the entrance loop, and pavement of the entrance road and parking area south of HWY 7. The 3R project will provide new driving surface, entrance gates, culverts, Architectural Barriers Act (ABA) compliant parking spot, and ABA compliant curb ramp. SCOPE OF THE WORK: The project will consist of full depth reclamation of the existing roads asphalt to a depth of 6-in, paving 3-in of asphalt, super elevation correction, and culvert replacement. New parking areas will be constructed with new aggregate base and asphalt pavement. A concrete ABA compliant curb ramp and ABA compliant parking spot. Concrete aprons will be placed around existing structures to match existing. Two new gates at the entrances to the NFH will also be installed. Entrance roads and parking areas will be closed during construction. PRINCIPAL WORK ITEMS: 30402-5300 Full Depth Reclamation Method 2, 6-inch depth: 6,800 SQYD 40301-0100 Asphalt Concrete Pavement, 1,250 TON 20401-0000 Roadway Excavation, 400 CUYD

6515--Patient Monitoring and Telemetry System Salt Lake City, UT

NETWORK CONTRACT OFFICE 19 (36C259)

The purpose of this amendment (004) is to extend the deadline for quote packages. QUOTES: Quotes are to be received via email, stephanie.cahill@va.gov, no later than 12:00pm MST, on Wednesday, August 5th, 2026. Quotes shall not be hand carried. Faxed quotes shall not be accepted. Emailed quotes are the only method of submitted quotes. The Government reserves the right to make the award solely on initial Quotes received. Offerors bear the burden of ensuring that all portions of the offer (and any authorized amendments) reach the designated office before the deadline specified in the solicitation. This RFQ shall be completed in its entirety, and signed and dated, failure shall not be considered for award. **If not all information for quote package can be sent in one, single email the offeror shall include in their subject line Email 1 of __ , Email 2 of __ , etc. to ensure the Government is able to track the number of emails for a complete quote package from the offeror.

Non-Emergent Ambulance Transport Services for Fayetteville VAMC

246-NETWORK CONTRACTING OFFICE 6 (36C246)

The Fayetteville NC VA Coastal Healthcare System VA Medical Center (hereafter FNCVACHCS ), and its associated Community-Based Outpatient Clinics (CBOCs), and affiliated healthcare clinics require contracted Non-Emergent Ambulance Transportation services. The contractor shall provide all vehicles, personnel, management, supplies, equipment, and necessary reporting for the provision of Stretcher Transports, Basic Life Support (BLS), Advanced Life Support (ALS), Specialty Care Transport (SCT) or Critical Care Transport (CCT) services. The contactor shall make these ambulance services available to the VA as needed, 24 hours a day, seven days a week (24/7), including weekends and holidays.

6515--Patient Monitoring System Salt Lake City VA Health Care System

NETWORK CONTRACT OFFICE 19 (36C259)

Justification: F-15 Specialized Engineering and Technical Services for the Maintenance Testability Analysis Program

FA8538 AFSC PZAAB

6550--LAB - ABBOTT ALINITY-M PCR MOLECULAR REAGENTS & SUPPLIES

242-NETWORK CONTRACT OFFICE 02 (36C242)

Crane and Rigger Support

W6QM MICC-FT BLISS

Justification: F-15 Specialized Engineering and Technical Services/Avionics Systems Supportability Analysis Program

FA8538 AFSC PZAAB

Federal Aviation Administration (FAA) Research And Commercial Solutions Opening (RCSO) Area Of Interest (AOI) - Complexity Of Systems And Operations

693KA8 SYSTEM OPERATIONS CONTRACTS

General Information This solicitation is for Area of Interest (AOI) Complexity of Systems and Operations under the Broad Agency Announcement BAA-693KA8-26-RCSO - Research And Commercial Solutions Opening (RCSO). Interested parties should review the Federal Aviation Administration’s (FAA) RCSO special posting BAA-693KA8-26-RCSO on SAM.gov in its entirety to obtain the necessary information on the process and evaluation of the RCSO AOI submission. This RCSO AOI seeks to solicit innovative research/solutions that meet the objectives detailed in Sections 5.1 – 5.6. The term innovative is defined as any technology, process, or method, including research and development that is new as of the date of proposal submission; or any new application of an existing technology, process or method as of the proposal date. The FAA is not obligated to extend a request for proposal or make an award as a result of this RCSO AOI; all awards are subject to the availability of funds and successful negotiations. This RCSO AOI is not an authorization to begin performance, and in no way obligates the Government for any costs incurred by the Offeror associated with developing a response. Prior to commencement of any activities associated with performance under this RCSO AOI, the Government will execute a written Other Transaction Agreement (OTA) award signed by the Agreements Officer (AO) with appropriate consideration established. The FAA reserves the right to modify the requirements of this RCSO AOI. See Attachments for additional information. Interested parties should review the Federal Aviation Administration’s (FAA) RCSO special posting BAA-693KA8-26-RCSO attached and also on SAM.gov in its entirety to obtain the necessary information on the process and evaluation of the RCSO AOI submission.

AIT Follow-on - Sources Sought Notice

NAVAL UNDERSEA WARFARE CENTER

The Naval Undersea Warfare Center, Division, Keyport (NUWCDIVKPT) is issuing a sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to perform this requirement. NUWCDIVKPT Fleet Readiness and Unmanned and Theater Undersea Warfare Systems Departments are responsible for providing Engineering, Maintenance, Alteration Installations, and Technical Support for various systems installed on board United States (U.S.) Navy vessels. The NUWC Systems Engineering Division is responsible for: developing alteration installation packages supporting upgrades; fielding systems through the alteration installation process; preparing, planning, and providing conformance documentation to support the installation of various alterations; conducting pre- and post- installation testing; publishing alteration installation results and completion reports; and, maintaining a Naval Sea Systems Command (NAVSEA) approved Alteration Installation Team (AIT) Quality Assurance Program and Process. This is not a request for proposal and a contract will not be awarded from this questionnaire. This notice is for planning purposes only and is not to be construed as a commitment by the Government. This is not a solicitation announcement. No reimbursement will be made for any costs associated with providing information in response to this announcement, or any follow-up information requests. Specific company information will be kept confidential and will not be disseminated to the public. The result of this market research will contribute to determining the acquisition plan and the method of procurement. The contemplated contract will be Cost-Plus-Fixed-Fee (CPFF), utilizing full and open competition to allow any qualified prime contract holder to propose. It will be awarded on a best-value basis to the Government. A trade-off analysis will be carried out, taking into consideration technical capability, past performance, and cost/price.

Snow Removal Services, Everett Lake, Weare, NH

W2SD ENDIST NEW ENGLAND

THE WORK CONSISTS OF: Contractor shall furnish all labor, materials, and equipment necessary to provide snow removal services at Everett Lake, Weare, NH in accordance with the Performance Work Statement. This procurement is set-aside for small business vendors. The applicable NAICS code is 561730 with a Small Business Size Standard of $9.5 Million. ALL VENDORS MUST HAVE AN ACTIVE REGISTRATION IN SAM.GOV AT THE TIME OF SUBMISSION IN ORDER TO BE CONSIDERED. ANY VENDOR THAT DOES NOT HAVE AN ACTIVE SAM.GOV REGISTRATION WILL BE REJECTED AS NON RESPONSIVE.

NFPA 101 Life Safety Code Training

NATIONAL ACQUISITIONS - CO

Elevator Equipment and Systems Recurring Preventative Maintenance and Non-Wear-and-Tear Repairs

NSWC PHILADELPHIA DIV

The Naval Surface Warfare Center Philadelphia Division (NSWCPD) proposes to award a competitive single award Firm Fixed Price (FFP) Service Contract resulting from this Request for Quotation (RFQ) for Elevator Equipment and Systems Recurring Preventative Maintenance and Non-Wear-and-Tear Repairs located at various Government buildings at the Philadelphia Navy Yard (also known as the Philadelphia Naval Business Center (PNBC). This requirement is being solicited as a 100% Small Business Set Aside. A site visit will be held on October 8th, 2026 at 10AM. All requests to attend the site visit, including visitor name, email, company name and address, must be sent to haley.e.bailey3.civ@us.navy.mil and david.a.rhoads8.civ@us.navy.mil no later than 12 PM EST, October 6th, 2026

C45 NDI Follow-on

NSWC PHILADELPHIA DIV

This is a competitive solicitation for a Cost-Plus-Fixed-Fee (CPFF), Level of Effort (LOE) task order under the SeaPort-NxG Multiple Award Contract (MAC) vehicle. This requirement is for engineering, technical, programmatic, and software development support services for the Naval Surface Warfare Center, Philadelphia Division (NSWCPD) in support of Submarine Command, Control, Communications, Computers, and Intelligence (C4I) and Hull, Mechanical, and Electrical (HM and E) systems. The scope includes, but is not limited to: engineering design, hardware prototype fabrication, SUBSAFE/Level I quality assurance compliance, life-cycle software development (CMMI Level 3 equivalent), and direct OCONUS fleet support in locations including Japan, Guam, and Diego Garcia. The total estimated Level of Effort is 425,150 hours over a five-year period of performance (one base year and four one-year options).

Tooling BPA Follow-on

FA8227 AFMC OL H PZIMB

SOURCES SOUGHT SYNOPSIS: Solicitation Number: Notice Type FA8227-26-Q-TBPA Sources Sought Synopsis: Notice: This is not a solicitation but rather a Sources Sought Synopsis to determine potential sources for information and planning purposes only The purpose of this Sources Sought is to conduct market research to determine if responsible sources exist, to assist in determining if this effort can be competitive and/or a total Small Business Set-aside. The proposed North American Industry Classification Systems (NAICS) Code is 333515 which has a corresponding size standard of 500 employees. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a), Service-Disabled Veteran-Owned, Hubzone, and Women_owned small business concerns. The Government requests that interested parties respond to this notice if applicable and identify your small business status to the identified NAICS code. Additionaly, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners. Below is a document containing a description of the 10 year Tooling BPA Follow-on, which allows you to provide your company’s capability. If the Government decides to conduct procurement as a result of your submissions, a separate pre-award synopsis of that procurement will be posted to SAM.gov. Interested companies are requested to submit a summary outline of their qualifications to perform this Tooling BPA Follow-on. References to vendor web pages will not be accepted. The Government will not entertain any questions at this time. Please note that we cannot return your submissions to you. Both large and small businesses are encouraged t

XUMU 20260001A Bldg 15501 FOC Comm Install

FA4610 30 CONS PK

Fort Benning Job Order Contract

W6QM MICC-FDO FT SAM HOUSTON

Total and Spectral Solar Irradiance Sensor-2 (TSIS-2) Mission Operations and Data Processing

NASA GODDARD SPACE FLIGHT CENTER

The purpose of this contract is to acquire continued mission operations, data processing and related services through the three-year mission life and decommissioning period of the TSIS-2 mission. The contractor shall provide all mission operations, highly specialized data processing and analysis for TSIS-2.

F103--SPS Critical Water Testing

NETWORK CONTRACT OFFICE 23 (36C263)

Award Notice Posting

Sterling, VA UPS Replacement

ATF

UPS Battery installation and removal of failed UPS Battery with 4 1-year preventative maintenance options

Build America Bureau - Insurance Advisor

693JJ3 ACQUISITION AND GRANTS MGT

This is a sources sought notice/request for information for an Insurance Advisor for the Build America Bureau. FHWA is conducting market research to identify potential sources for an anticipated contract for the Build America Bureau. Please submit questions on this requirement no later than 9/18/2026. Response date is updated to 10/29 to give the Government additional time to provide responses to questions.

Mycronic Pick and Place Machine

NAVAL AIR WARFARE CENTER

The Naval Air Warfare Center Weapons Division, Airborne Instrumentation Division, located at Naval Base Ventura County, Point Mugu, California, awarded contract N6893626P5466 to Mycronic Inc on September 29, 2026, for $813,473. The contract provides procurement, delivery, installation, integration, and training associated with Surface Mount Technology line upgrade equipment, including one MYPro S30 Stencil Printer Machine, one MYPro A40LX-17 Pick-and-Place Machine, one SMT Line Conveyor ED600 Workstations, and one MYPro PI PICO 3D Solder Paste Inspection Machine.

Industry Day Notification

INDUSTRY DAY NOTIFICATION (Virtual Presentation 1000 - 1100 CDT • Wednesday, Sept 30, 2026 • MSTEAMS) Industry Day Web meeting for Fiber Reinforced Polymer (FRP) Composite Structures at Black Warrior-Tombigbee River Holt Lock Filling and Emptying Valve Bulkhead and Okatibbee Dam Culvert Intake Bulkhead FRP Fabrication Notice NAICS Code: 326199 - All Other Plastics Product Manufacturing Description The U.S. Army Corps of Engineers (USACE), Mobile District, will be conducting a virtual Industry Day to inform prospective fabricators and manufacturers of two upcoming procurement projects under development: the Holt Lock Filling and Emptying Valve Bulkhead and the Okatibbee Dam Culvert Intake Bulkhead. The primary objective of these projects is for the fabricator to provide all labor, materials, shop facilities, and equipment necessary for the complete fabrication, shop-testing, and delivery of these structures to USACE for Government acceptance and use. The Government is particularly interested in fabricator consultation regarding manufacturing feasibility, quality control (QA/QC) parameters, and transport logistics. Key topics for feedback include: Fabrication & Tolerance Feasibility: Review of Draft Drawings and Technical Specifications. Material & Component Procurement: Availability, long-lead items, and specialty steel sourcing. Shop Testing & Quality Assurance: Feedback on proposed validation testing and inspections. Delivery & Transportation Logistics: Delivery requirements and shipping constraints. The Industry Day event will be held via Microsoft TEAMS at 1000 CDT on Wednesday, September 30, 2026. The virtual meeting will consist of a briefing for each project conducted by the USACE engineering team. After the general session, individual 45-minute breakout sessions will be held for interested firms, beginning at 1130 PM CST. This is a critical opportunity for fabricators to provide direct feedback and discuss potential approaches and challenges one-on-one with t