Tenders

Purchase Olson Electrics 300k Pad Mount Transformer

GSA/FAS/GSS/QSCB, SUPPLY CHAIN MANAGEMENT CONTRACTING DIVISION

This Request for Quote (RFQ) is for the purchase, delivery, and testing of one Olsun Electrics 300k pad mount transformer. For requirements and delivery information please see attached RFQ document. For quote to be considered valid, return BOTH the completed RFQ document and the MIL-STD 129 compliance document signed on page 8 via email to cara.fowler@gsa.gov

TSA DTSS and TSII Re-Competition

SECURITY TECHNOLOGY

TSA is issuing this combined Sources Sought / Request for Information to solicit industry’s capabilities and input on certain requirements to determine whether it would be advantageous for the agency to combine the requirements.

Corrective and Preventative Maintenance of Electronic Security Systems at the Ronald Reagan Building

FPS EAST CCG DIV 2 ACQ DIV

RFQ Amendment 0005 has been posted below. Furthermore, industry questions and answers are forthcoming based on the questions received from industry. RFQ Amendment 0004 has been posted below. RFQ Amendment 0003 has been posted below. RFQ Amendment 0002 has been posted below. RFQ Amendment 0001 has been posted below. NOTE: PLEASE BE ADVISED BEGINNING MONDAY, AUGUST 17, 2026 TRAVEL RESTIRICTIONS BEGIN AROUND THE RONALD REGAN BUILDING DUE TO THE PREPARATION FOR THE GRAND PRIX RACE. PLEASE ACCOUNT FOR POTENTIAL TRAVEL DELAY AND ALLOW ADDITONAL TRAVEL TIME TO ATTEND THE SITE VISIT SCHEDULED FOR MONDAY, AUGUST 17, 2026 AT 10AM ET. The US Department of Homeland Security (DHS), Federal Protective Service (FPS) has a requirement for corrective and preventative maintenance of electronic security systems and the replacement and removal of outdated electronic security systems at the Ronald Reagan Building (DC0459). The Contractor shall provide preventive maintenance, repair, replacement, lifecycle upgrades and installations to meet assessed security vulnerabilities / gaps in existing security systems. The services include, but are not limited to, routine and preventive maintenance, repairs and service calls. The VSS equipment includes, interior and exterior fixed IP cameras, controllers, monitors and NVR recorders, power supplies, and all associated ancillary equipment and infrastructure that are part of the Ronald Reagan Building Complex. The Period of Performance is for a one-year base ordering period with four one-year optional ordering periods. An Indefinite Delivery/Indefinite Quantity (IDIQ) contract with fixed priced provisions is anticipated. This acquisition is being solicited as a total Women-Owned Small Business set aside. Resultant task orders under this contract will be firm fixed price. The source selection process to be utilized for this acquisition is best value/trade-off. The technical, non-price factor, when combined, is more important than price. The submissio

61--BATTERY ASSEMBLY, IN REPAIR/MODIFICATION OF

NAVSUP WEAPON SYSTEMS SUPPORT MECH

NSN 7H-6140-014708756, TDP VER 004, QTY 26 EA, DELIVER TO Q97362, NORTHROP GRUMMAN SYSTEMS CORP, CHARLOTTESVILLE, VA 22901-5000, INDUCTION NIIN IS 7H, 6140, 014708756, BATTERY ASSEMBLY, 1981554. The Government does not own the data or the rights to the data needed to purchase / contract repair of this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-2667 or 215-697-2179(DSN: 442-2667), or mail their requestDLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals recei

16--PAM,AIRCRAFT,MATERI

DLA AVIATION AT PHILADELPHIA, PA

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|||X|TBD||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Report (combo)|N/A|TBD|SPRPA1|TBD|TBD|See Schedule|TBD|N/A|N/A|TBD|M/A|N/A|N/A|N/A|N/A| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|robyn.grinarml@dla.mil| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| No drawings are available for this Request for Quotation. NAICS Code: 336413 Small Business Size Standard: 1250 THIS IS A CRITICAL APPLICATION ITEM (CAI). \

Z--EO 14398 GRCA Water Leak Repair at School

EO 14398 GRCA Water Leak Repair at School

Sole Source Award (Bridge) - USMC 4PL NextGen

GSA/FAS/GSS/QSCBA/SPECIAL CONTRACTING BRANCH A AND QSCBB SPECIAL CONTRACTING BRANCH B

This is a notice to post a Sole Source Justification (SSJ) Award in accordance with FAR Subpart 8.4, (GSA Class Deviation RFO-2025-08), additionally IAW, GSAR 538.7104-3(b)(1)(iii) (GSA Class Deviation RFO-2025-FSS-GSAR 538), the order should be issued on a sole source basis in the interest of economy and efficiency because it is a logical follow-on to an FSS order already issued on a competitive basis. RFQ 47QSCC26Q5001 seeks to establish a new USMC BPA award competed under FAR Subpart 8.4 (GSA Class Deviation RFO-2025-08) procedures and this bridge is required in the interim.

31--BEARING,BALL,DUPLEX

NAVSUP WEAPON SYSTEMS SUPPORT MECH

NSN 3H-3110-009921019-NT, TDP VER 007, QTY 50 PR, DELIVERY FOB ORIGIN. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing/repair knowledge by the qualified source(s) require acquisition/repair of the part from the approved source(s). The approved source(s) retain data rights, manufacturing/repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-2667 or 215-697-2179(DSN: 442-2667), or mail their requestDLA Document Services, Bldg. 4/D, 700 Robbins Avenue, P

Request For Information - Visual Information Systems Modernization (VISM)

COMMANDER

Program Acquisition Executive Marine Corps (PAE MC) Program Manager Tactical Communications & Electromagnetic Warfare Systems (PM TCE) is assessing industry’s capability to provide Commercial-Off-The-Shelf (COTS) tactical camera systems, lenses, and accessories under a Hardware-as-a-Service (HaaS) operating lease model. The focus of this RFI is to find HAAS vendors to assist with establishing a sustainable, multi-year "Evergreen" technology refresh cycle for the Marine Corps' Visual Information Acquisition System (VIAS) Family of Systems (FoS). The HaaS vendor will be responsible for providing the latest-generation commercial equipment, managing the technology lifecycle, and executing a mandatory 36-month hardware refresh for all leased components. See component listing under Attachments section. This RFI specifically seeks information from vendors experienced in leasing, COTS technology integration, tactical kitting, and lifecycle management for Department of War (DoW) customers. See RFI Attachment for more information under Attachments section.

LD3 Tree Removal

W07V ENDIST ST PAUL

Amendment 4 is to add new questions and answers to the Question and Answer Section and to extend the date offers due to 30 September 2026. Amendment 3 is to add a new question and answer to the Question and Answer section. Amendment 2 is to add new questions and answers to the Question and Answer section. Amendment 1 is to update the date of the site visit to 17 September 2026, update Section F to align with paragraph 1.4 Period of Performance of the Scope of Work and to include a Question and Answer section. The contractor shall supply all labor, material, equipment, tools, safety compliance and supervision necessary to cut, fell, and manage woody vegetation and trees. The Contractor shall cut and fell trees within the designated 50-foot vegetation free zone. The project area spans approximately 2,800 linear feet along the entrance roadway and security fence at Lock and Dam 3 in Welch, Minnesota.

U.S. Government Seeks To Lease Office Space in Kennebunkport, ME

PBS R00 OFFICE OF LEASING

U.S. GOVERNMENT NOTICE OF LEASE REQUIREMENT The General Services Administration (GSA) is seeking expressions of interest from owners and authorized representatives of properties meeting the following requirements: State: Maine City: Kennebunkport Delineated Area: City limits of Kennebunkport, Maine Minimum Sq. Ft. (ABOA): 5,000 Maximum Sq. Ft. (ABOA): 5,500 Space Type: Warehouse Full Term: 15 years Firm Term: 10 years Option Term: None Additional Requirements: None Offered space must meet Government requirements for fire safety, accessibility, seismic, and sustainability standards per the terms of the Lease. A fully serviced lease is required. Offered space shall not be in the 1-percent-annual chance floodplain (formerly referred to as “100-year” floodplain). Entities are advised to familiarize themselves with the telecommunications prohibitions outlined under Section 889 of the FY19 National Defense Authorization Act (NDAA), as implemented by the Federal Acquisition Regulation (FAR). For more information, visit: https://acquisition.gov/FAR-Case-2019-009/889_Part_B. Expressions of interest must Include. 1. Building name and address; 2. Contact information and e-mail address of offeror’s representative; 3. ABOA SF and rentable square feet available, identifying the specific floors and square footages; 4. Asking full-service rental rate per ABOA SF and RSF inclusive of a standard GSA warm-lit shell, a tenant improvement allowance of $10.12/ABOA SF, and a BSAC allowance of $12/ABOA SF; 5. Operating costs per ABOA SF and RSF included in the full-service rates; 6. Submission by anyone other than the owner or manager of a property must be accompanied by written consent from the ownership granting authority to the representative in providing the information to the Government. The U.S. Government currently occupies office and related space in a building under a lease in Kennebunkport, ME, that will be expiring. The Government is considering alternative space if economically

13--CASE,AFTERBODY TORP

NAVSUP WEAPON SYSTEMS SUPPORT MECH

NSN 3H-1355-015610821, TDP VER 029, QTY 76 EA, DELIVER TO W25G1U, W1A8 DLA DISTRIBUTION, NEW CUMBERLAND, PA 17070-5002, DELIVER TO W62G2T, W1A8 DLA DIST SAN JOAQUIN, TRACY, CA 95304-5000. The proposed acquisition is 100% set aside for small business concerns (see FAR clause 52.219-6, Notice of Total Small Business Set-Aside). The specific type of set-aside will be addressed in the solicitation through inclusion of one of the appropriate clauses listed here: FAR 52.219-3 Notice of HUBZone Set-Aside or Sole Source Award FAR 52.219-27 Notice of Service-Disabled Veteran-Owned Small Business Set-Aside FAR 52.219-29 Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business Concerns FAR 52.219-30 Notice of Set-Aside for Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program DFARS 252.226-7000 Notice of Historically Black College or University and Minority Institution Set-Aside Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-2667 or 215-697-2179(DSN: 442-2667), or mail their requestDLA Document Services, Bldg.

GOCO Industry Day

W6QK ACC-RI

Updated Date and Location (10/26/26); The USG is updating the location for the general session to be at the Hilton at 1 Hilton Court, Parsippany-Troy Hills, NJ 07054. Further, the date of the general session will be on 18 November with one-on-ones taking place 19-20 November. One-on-one meetings will still take place at Picatinny Arsenal. The announcement has been updated below. Reach out to usarmy.ria.acc.mbx.s3coe-events@army.mil with any questions. Army Contracting Command – Rock Island (ACC-RI), on behalf of Portfolio Acquisition Executive Agile Sustainment and Ammunition (PAE AS&A) and Army Sustainment Command (ASC) is hosting an Industry Day focused on transforming the operational strategy of Government Owned Contractor Operated (GOCO) facilities on 18-20 November 2026 in NJ. The General Session will take place at the Hilton at 1 Hilton Court, Parsippany-Troy Hills, NJ 07054 on 18 November. The subsequent one-on-ones will take place at Picatinny Arsenal Building 3411 on 19 November and Building 3409 on 20 November. The Government will also provide an update on the Blue Grass Army Depot (BGAD) Energetics Center of Excellence (ECoE) at this event. The purpose of this Industry Day is to obtain Industry input on a commercially disciplined GOCO operating model that preserves Government mission priorities while providing the operating contractor meaningful responsibility and flexibility to manage the facility as a competitive manufacturing enterprise. The Government is seeking input from both traditional and non-traditional defense contractors as it explores transforming its operational strategy. The Government is seeking industry input on BGAD ECoE potential solutions achieving long-term self-sustainability, that would meet both defense and commercial needs, while providing resilience to the energetic organic industrial base. Schedule : The Government intends to host a 3-day event, consisting of a General Session and two subsequent days of one-on-one engagements. 1

Pest Control Support Services at Naval Weapons Station Earle

NAVFACSYSCOM MID-ATLANTIC

See Section L of the Solicitation for Full Narrative Details: Pest Control Support Services 1. This requirement has been 100% Set-Aside for Small Business Concerns. 2. The purpose of the Request for Proposal (RFP) is to procure Pest Control Support Services in support of Naval Weapons Station (NWS) Earle. Services are to be performed at Colts Neck and Leonardo, New Jersey. 8. Offerors are highly encouraged to attend the one site visit, scheduled for Tuesday, 27 October 2026 at 0900 Eastern Standard Time (EST). Contractors MUST meet at the Visitor Control Center located at the entrance to NWS Earle: 201 Highway 34-S, Colts Neck, NJ. If you plan on attending the site visit, you must sign up via email NLT Monday, 26 October 2026 by notifying the below Points of Contact, in order for adequate transportation to be arranged: - Mr. Wayne Kolb via email at: wayne.r.kolb.civ@us.navy.mil - Mr. Nelson Jusino via email at: nelson.r.jusino.civ@us.navy.mil 10. Quotes are due no later than 11:00 AM Eastern Daylight Time, Tuesday, 24 November 2026. - Electronic quotes are acceptable and may be e-mailed to Jessica Mercurio at: jessica.a.mercurio.civ@us.navy.mil. - Offeror’s may also request a DoD Safe Drop-Off Link, via request to Jessica Mercurio. See Section M for Basis for Award and Evaluation Factors.

6835--VISN 2 Prosthetics Downstate Home Oxygen Services

242-NETWORK CONTRACT OFFICE 02 (36C242)

Downstate Home Oxygen

61--CABLE ASSEMBLY,SPECIAL

DLA AVIATION

Proposed procurement for NSN 6150015559791 CABLE ASSEMBLY,SPECIAL: Line 0001 Qty 8 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0703 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0120 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Purchase Olsun Electrics 225 KVA Transformer

GSA/FAS/GSS/QSCB, SUPPLY CHAIN MANAGEMENT CONTRACTING DIVISION

This Request for Quote (RFQ) is for the purchase, delivery, and testing of one Olsun Electrics 225k pad mount transformer. For requirements and delivery information please see attached RFQ document. For quote to be considered valid, return BOTH the completed RFQ document and the MIL-STD 129 compliance document signed on page 8 via email to cara.fowler@gsa.gov

6515--SUPPLIES-PERIPHERAL IMPLANTS- CLEVELAND

250-NETWORK CONTRACT OFFICE 10 (36C250)

16--STEERING UNIT,AIRCR, IN REPAIR/MODIFICATION OF

NAVSUP WEAPON SYSTEMS SUPPORT

NSN 7R-1620-014752013-V2, TDP VER 003, QTY 82 EA, DELIVERY FOB ORIGIN. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing/repair knowledge by the qualified source(s) require acquisition/repair of the part from the approved source(s). The approved source(s) retain data rights,manufacturing/repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evalua

AIRCRAFT, STRATOFORTRESS, B-52; SUPPORT, ENGINE MOUNT

DLA AVIATION

Solicitation for End Item: AIRCRAFT, STRATOFORTRESS, B-52; SUPPORT, ENGINE MOUNT; NSN 1560-008310804. DURATION OF CONTRACT ORDERING PERIOD: 60 MONTHS OR 5 YEARS. NO OPTION TO EXTEND THE TERM OF THE CONTRACT. THE REQUESTED TOTAL DELIVERY SCHEDULE IS 365 DAYS PRODUCTION; Export Control does apply. Critical Application Item. The NSN is NOT a Critical Safety Item (CSI). Configuration Control Applies. GOVERNMENT First Article Test requirements DO apply to this NSN. Production Lot Test (PLT) requirements DO NOT apply to this NSN. NAICS is 336413 . This is a 100% Small Business Set Aside procurement after exclusion of sources. Source(s) of Supply listed in the Item Description: THE BOEING COMPANY CAGE: 76301 P/N 35-8262-502 110 METALWORKS, INC. CAGE:7Y935 P/N 35-8262-502 MONROE MACHINED PRODUCTS, INC. CAGE: 7F311 P/N 35-8262-502 APEX MANUFACTURING COMPANY, INC. CAGE: 2V343 P/N 35-8262-502 MALONES CNC MACHINING INC CAGE: 2V045 P/N 35-8262-502 WELCH MACHINE INC CAGE: 2U747 P/N 35-8262-502 CAMNETICS MANUFACTURING CORPORATION CAGE: 0P657 P/N 35-8262-502 FORREST MACHINING LLC CAGE: 0FRC8 P/N 35-8262-502 D-J ENGINEERING INC CAGE: 0C7H8 P/N 35-8262-502 THE BOEING COMPANY CAGE: 81205 P/N 35-8262-502 PRECI-MANUFACTURING, INCORPORATED CAGE: 66841 P/N 35-8262-502 AIRTRONICS, LLC CAGE: 58078 P/N 35-8262-502 BETA ENGINEERING, INC. CAGE: 33436 P/N 35-8262-502 AEROMETALS, INC. CAGE; 32664 P/N 35-8262-502 NORDAM GROUP LLC, THE CAGE: 29957 P/N 35-8262-502 HARLOW AEROSTRUCTURES, LLC CAGE; 14248 P/N 35-8262-502 FOB Destination, Inspection/Acceptance: Origin. This is a request for proposal for an Indefinite Quantity Contract. Estimated Annual Quantities for the base period of five (5) years and zero (0) option periods will be 40 each. Specifications, plans, or drawings relating to the procurement described may or may not be available and will be furnished by the Government through C-Folders if applicable. Request for a written proposal, please submit offers to fax # (804) 279-4165. OFFERORS M

Solicitation for Offers - Office/Medical Space Approximately 12,000 Rentable Square Feet (RSF) in Crestview, FL

NAVFACSYSCOM SOUTHEAST

The United States of America, acting through the Department of the Navy, Naval Facilities Engineering Systems Command Southeast (Government), has a requirement for office / medical space in Crestview, FL. The Government is seeking to lease approximately 12,000 rental square feet (RSF) of office and medical space(s) in support of Defense Heath Agency (DHA) medical provider requirements.

59--OSCILLATOR,NONCRYST, IN REPAIR/MODIFICATION OF

NAVSUP WEAPON SYSTEMS SUPPORT

NSN 7R-5955-014262653-XE, TDP VER 007, REF NR 459525, QTY 8 EA, DELIVERY FOB ORIGIN. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing/repair knowledge by the qualified source(s) require acquisition/repair of the part from the approved source(s). The approved source(s) retain data rights,manufacturing/repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currentl