Public tenders
Tenders
Live results from every procurement portal we monitor. Refine the search using the filter bar above.
107,975 matching · page 844 of 4,499
58--RECORDER,VIDEO, IN REPAIR/MODIFICATION OF
NAVSUP WEAPON SYSTEMS SUPPORT
NSN 7R-5836-015342386-QF, TDP VER 001, QTY 130 EA, DELIVERY FOB ORIGIN. The data needed to acquire/repair this part competitively is not physically available, it cannot be obtained economically, nor is it possibleto draft adequate specifications or any other adequate, economical description of the material for a competitive solicitation. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluated at NAVSUP WSS submit with your offer a copy of the cover letter which forwarded your request for source approval. Offers received which fail to provide all data required by the Source Approval Brochure or document previous submission of all data required by the Source Approval Brochure will not be considered for award under this solicitation. Please note, if evaluation of a source approval request submitted hereunder cannot be processed in time and/or approval requirements preclude the ability to obtain subject items in time to meet Government requirements, aw
Transportable Temporary Housing Unit (TTHU) Retro Fit Shower and Accessories Installation Kits
COMMUNITY SURVIVOR ASSISTANCE SEC
Amendment 1 The purpose of this Amendment 1 is the following: 1) The SAM Notice ID is revised from 70FB827Q00000003 to 70FB8027Q000000003. Quoters submissions shall include 70FB8027Q00000003. 2) Revised the solicitation Description to read the following under (1) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with Revolutionary FAR Overhaul (RFO) Part 12. This announcement constitutes solicitation. Offers are being requested and a separate written solicitation will not be issued. 3) Provide responses to Questions/Clarifications received through October 26, 2026. The Question submission date remains October 30, 2026, 1:00pm ET. 4) Provide Amendment 1_70FB8027Q000000003 Attachment 1 Statement of Work 5) Provide Amendment 1_70FB8027Q00000003 Attachment 2 Terms and Conditions. 6) Provide Amendment 1_70FB8027Q00000003 Attachment 3 Past Performance Questionnaire. 7) Provide Amendment 1_70FB8027Q000000003 Attachment 4 Pricing Table. ***************************************************************************************** (i) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with FAR Part 12. This announcement constitutes solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation Number 70FB8027Q00000003 is issued as a Request for Quote (RFQ) for Retro Fit Shower and Accessories Installation Kit, to include inside Transportable Temporary Housing Units (TTHUs) to support displaced individuals with disabilities. This acquisition is a full and open competition. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov/far-overhaul/far-part-deviation-guide. (ii) A list of line-item number(s) and items, quantities, and unit of measure, is at Attachment 4 - Pricing Table. (iii) The Department of Homeland
16--INERTIAL NAVIGATION, IN REPAIR/MODIFICATION OF
NAVSUP WEAPON SYSTEMS SUPPORT
NSN 7R-1680-015708454-QE, TDP VER 001, QTY 55 EA, DELIVERY FOB ORIGIN. The data needed to acquire/repair this part competitively is not physically available, it cannot be obtained economically, nor is it possibleto draft adequate specifications or any other adequate, economical description of the material for a competitive solicitation. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluated at NAVSUP WSS submit with your offer a copy of the cover letter which forwarded your request for source approval. Offers received which fail to provide all data required by the Source Approval Brochure or document previous submission of all data required by the Source Approval Brochure will not be considered for award under this solicitation. Please note, if evaluation of a source approval request submitted hereunder cannot be processed in time and/or approval requirements preclude the ability to obtain subject items in time to meet Government requirements, awa
99--Notice Regarding Dept. of the Interior, IBC, AQD to close contracts.
IBC ACQ SVCS DIRECTORATE (00004)
The Department of the Interior, Interior Business Center (IBC), Acquisition Services Directorate (AQD) plans to proceed with the closeout of contracts in accordance with FAR 4.308. The contracts listed in the attachment have an expired period of performance, are fully invoiced, and have a remaining balance of zero dollars. This notice serves as advance notification to the vendors identified in the attached contract list regarding the upcoming closeout action. Unilateral contract closeout will begin ten business days after the posting of this announcement. If you prefer a bilateral contract closeout modification or have a valid reason why we should not proceed with the closeout, please contact the point of contact (POC) listed in this announcement before the closing date.
Notice of Intent to Sole Source - Economic Impact Assessment
NIWC ATLANTIC
THIS IS A NOTICE OF INTENT AND NOT A REQUEST FOR COMPETITIVE QUOTES. The Naval Information Warfare Center (NIWC) Atlantic intends to award a Firm-Fixed Price purchase order on a sole source basis to the University of South Carolina (USC), 1600 Hampton Street, Columbia, SC 29208 under the authority of FAR 13.101(b). The procurement is estimated at less than $350,000 and will acquire a comprehensive Economic Impact Assessment of NIWC Atlantic business activities in South Carolina, Virginia, Louisiana, and various outlying detachments. USC has completed the previous iterative assessments using proprietary methodologies and algorithms that are essential to enable longitudinal analysis and direct data comparisons. The applicable North American Industry Classification System (NAICS) code is 541690, with a size standard of $19M. Questions may be submitted via the PIEE solicitation module within (15) days of the date of this publication. A determination by the Government not to compete this action based upon responses to this notice is solely within the discretion of the Government. System Award Management (SAM) registration is required for all vendors doing business with the Government.
Future Announcement: Quantum Computing – Applications Workshops (QC-AW)
DEF ADVANCED RESEARCH PROJECTS AGCY
The purpose of this Special Notice (SN) is to provide advance notice of the Defense Advanced Research Projects Agency’s (DARPA’s) intention to host future workshops to determine the commercial impact of future utility-scale quantum computers. Any future Quantum Computing – Applications Workshops (QC-AW) Request for Information (RFI) describing the workshop will be made available at https://sam.gov/.
Camptonville Housing Decommissioning
USDA FOREST SERIVCE
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 127EAX27Q0010 is issued as a Request for Quotation (RFQ) for TAHOE NATIONAL FOREST, Camptonville Housing Decommissioning. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 238910. The small business size standard is $19 million. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency. SF-1442: All Contractors must be registered in the System for Award Management (www.SAM.gov) at time of submission of a quote. Contractors are responsible for following all submission instructions and to ensure delivery of all required documents by the date and time set for receipt of quotes or any Amendment that extends the receipt date. Proposal Evaluation and Basis for Contract Award: Starts on Page 13 Quotation/Proposal Submittal Requirement: Starts on Page 13 Bid Guarantee (FAR 52.228-1): 20% required if quote is in excess of $150,000. The SF-24 shall be used for Bid Bonds - https://www.gsa.gov/reference/forms/bid-bond Price Range – Between $100,000 and $250,000 NAICS: 238910 with a Small Business Size Standard of $19 Million. This acquisition is a total Small Business set-aside.
NEW - Air Force Installation and Mission Support Center (AFIMSC) Streamlining Procurement for Effective Execution & Delivery (SPEED) Commercial Solutions Opening (CSO)
FA8903 772 ESS PK
DISCLAIMER: Please be advised that this combined synopsis/solicitation has been transferred from the 771 ESS to the 772 ESS and is a continuation of combined synopsis/solicitation FA8003-25-S-C001. Please see updated POCs below and any inquiries may also be sent to the new org box: 772 ESS/Speed CSO at 772ESS.Speed.CSO@us.af.mil. Note: "Open" indicates that submissions may be provided at any time. "Closed" indicates that there is a definitive due date for submissions. REVISED POSTING: Revised attachment below, dated 16 April 2026. REVISED POSTING: See revision in bold in description below and in the revised attachment below, dated 18 March 2026. AMENDMENT 15: Closed - 2701 - Commercial Toolkit for Alternative Construction Acquisition (Added 10/28/2026) Due 11/28/2026) See attachment below. AMENDMENT 14: Closed - 2613 - Modernized Facility Space Planning Capabilities (Added 09/29/2026) Due 10/29/2026) See attachment below. AMENDMENT 13: Open - 2612 - Resilient, Permanent Expeditionary Facility Prototype Demonstration (Added 09/28/2026) See attachments below. AMENDMENT 12: Closed - 2611 - USAFA Chapel White Box Enclosure Concepts (Added 09/03/2026) Due 09/08/2026 See attachments below. AMENDMENT 11: Closed - 2610 - Radio Frequency (RF) Spectrum Monitoring System (Added 04/20/2026) Due 04/30/2026 Update: This amendment due date has been extended from 27 April 2026 to 30 April 2026, 5:00 P.M. CDT. See attachment below. AMENDMENT 10: Closed - 2609 - Innovative Housing Enterprise Management Solutions (Added 04/08/2026) Due 05/12/2026 See attachment below. AMENDMENT 9: Closed - 2608 - BRAC Innovative Approaches, Technologies and Methodologies (Added 03/27/2026) Due 04/28/2026 Update: This amendment adds the Q&As v2. See Q&A v2 attachment below. Update: This amendment adds the Q&As v1. See Q&A v1 attachment below. See attachment below. AMENDMENT 8: Closed - 2607 - As-Built Building Information Modeling (BIM) Data Acquisition (Added 03/16/2026) Due 04/16/2026 Update: This am
Pilot Training Transformation Device Support Services IV (PTT DSS IV)
FA3002 338 ESS CC
The purpose of this requirement is to maintain and support PTT device solutions based on state- of-the-art commercial simulation environments, hardware solutions for the cockpit simulation environment, and ancillary software elements.The Contractor shall provide all services and equipment necessary to install, maintain, and support new and existing PTT devices. Devices currently fit into the following classifications: common Immersive Training Device (cITD), enhanced Immersive Training Devices (eITD), and Helicopter Immersive Training Device (HITD). Any new classifications will need to be defined and evaluated prior to inclusion in this scope. The Contractor shall support 142 ITDs and up to 17 Instructor Operating Stations (IOS) at the following locations: Joint Base San Antonio (JBSA) Randolph, TX; Columbus Air Force Base (AFB), MS; Laughlin AFB, TX; Vance AFB, OK, Sheppard AFB, TX; and Fort Rucker, AL. The Government has the right to modify the quantity of devices/locations pending contract modification and funding. The Contractor shall maintain a common software interface to integrate current and future PTT software and hardware components as required by program goals, hardware solutions for the cockpit simulation environment, and on-premises network and data architecture hardware and support, as appropriate for deployed training systems.
17--NRP,FLAT PANEL A033, IN REPAIR/MODIFICATION OF
NAVSUP WEAPON SYSTEMS SUPPORT
NSN 7R-1730-016281428-EY, TDP VER 004, QTY 10 EA, DELIVERY FOB ORIGIN. This part must be acquired from/repaired by a source(s)specified on a source control or selected item drawing as defined by thecurrent version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing/repair knowledge are not available to permit acquisition from/repair by other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluated at NAVSUP WSS submit with your offer a copy of the cover letter which forwarded your request for source approval. Offers received which fail to provide all data required by the Sourc
NJ-NY ERFO FW WARI 2019-1(1) - Wallkill River National Wildlife Refuge
693C73 EASTERN FED LANDS DIVISION
Sealed bids from certified Small Business Concerns only will be accepted for Wallkill River National Wildlife Refuge, Project NJ-NY ERFO FW WARI 2019-1(1), Solicitation Number 693C73-27-B-000005, located in Sussex County, New Jersey; and Orange County, New York. The project consists of repairs to the Winding Waters Trail, Liberty Loop Trail (NE), Liberty Loop Trail (SW), and Dagmar Dale Nature Trail. The work includes embankment repairs, trail reconstruction, culvert replacement, stream regrading, headwall and wingwall installation, and other miscellaneous work. The project will be split into multiple work schedules/contract options, with the cost of the entire project expected to fall within the price range of $3,000,000 to $5,000,000. Bid documents should be issued on or about November 12, 2026. Bid due date and location will be specified on the SF 1442, Block 13a of the Solicitation. Use Internet address https://www.sam.gov (click on Contract Opportunities, then type “693C73” in the Search Contract Opportunities box and click the search button and all available projects will be listed) to check for the availability of advertisement documents. All documents can be directly downloaded from this website. Solicitation documents will not be mailed. Register to receive email notifications to be automatically notified when a document is added or updated for a specific project. If firms do not register as an interested vendor at this website, there will be no Interested Vendors List. Please send all questions concerning construction projects to eflhd.contracts@dot.gov. Include the solicitation number, project name and number, requesting firm and address, a point of contact and telephone number. Requests for 'faxing' or overnight mailing will not be accepted. IMPORTANT SAM REGISTRATION AND PAYMENT REQUIREMENTS In accordance with Federal Acquisition Regulation (FAR) 52.204-7 (DEVIATION NOV 2025), prospective contractors shall have an active Federal Government contracts reg
59--ELECTRONIC MODULE,S, IN REPAIR/MODIFICATION OF
NAVSUP WEAPON SYSTEMS SUPPORT
NSN 7R-5963-015338612-SX, TDP VER 007, QTY 5 EA, DELIVERY FOB ORIGIN. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing/repair knowledge by the qualified source(s) require acquisition/repair of the part from the approved source(s). The approved source(s) retain data rights,manufacturing/repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluat
16--ROD,PISTON,HYDRAULIC A
DLA AVIATION
Proposed procurement for NSN 1650012413131 ROD,PISTON,HYDRAULIC A: Line 0001 Qty 5 UI EA Deliver To: DLA DISTRIBUTION DEPOT HILL By: 0122 DAYS ADO Approved source is 70236 2840088008. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
25--SHOCK ABSORBER,DIRECT
DLA LAND AND MARITIME
Proposed procurement for NSN 2510016474433 SHOCK ABSORBER,DIRECT: Line 0001 Qty 26 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0161 DAYS ADO Approved sources are 338X5 3743749C1; 6N039 069900-000. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
26--INNER TUBE,PNEUMATIC T
DLA LAND AND MARITIME
Proposed procurement for NSN 2610013644097 INNER TUBE,PNEUMATIC T: Line 0001 Qty 1464 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0235 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
25--DISK,CLUTCH,VEHICULAR
DLA LAND AND MARITIME
Proposed procurement for NSN 2520012372872 DISK,CLUTCH,VEHICULAR: Line 0001 Qty 1834 UI EA Deliver To: DLA DISTRIBUTION ANNISTON By: 0228 DAYS ADO Approved source is 73342 23046713. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
59--MICROCIRCUIT,DIGITAL
DLA LAND AND MARITIME
Proposed procurement for NSN 5962010679523 MICROCIRCUIT,DIGITAL: Line 0001 Qty 115 UI EA Deliver To: DLA DISTRIBUTION DDWO By: 0213 DAYS ADO Approved source is 0C7V7 MM54C00J/883. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
59--ELECTRONIC MODULE,STAN
DLA LAND AND MARITIME
Proposed procurement for NSN 5963016511646 ELECTRONIC MODULE,STAN: Line 0001 Qty 48 UI EA Deliver To: By: 0065 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 7. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. This is a source controlled drawing item. Approved source is 73342 63CR05TU. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
10--BARREL,AUTOMATIC GUN
DLA LAND AND MARITIME
Proposed procurement for NSN 1005007879802 BARREL,AUTOMATIC GUN: Line 0001 Qty 225 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0557 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0090 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.
17--JACK,HYDRAULIC,TRIPOD
DLA TROOP SUPPORT
Proposed procurement for NSN 1730015637046 JACK,HYDRAULIC,TRIPOD: Line 0001 Qty 5 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0167 DAYS ADO Approved source is 59603 02-7809C0110. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
59--CONNECTOR,PLUG,ELECTRI
DLA LAND AND MARITIME
Proposed procurement for NSN 5935015871354 CONNECTOR,PLUG,ELECTRI: Line 0001 Qty 95 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0133 DAYS ADO Approved source is 71468 CA140266-2. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
53--NUT,SELF-LOCKING,HEXAG
DLA LAND AND MARITIME
Proposed procurement for NSN 5310002453505 NUT,SELF-LOCKING,HEXAG: Line 0001 Qty 1550 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0105 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
DataMesh Tender Radar
Win more UK IT & software tenders — one curated email a week
We watch Find a Tender & Contracts Finder so you don't have to. Every Monday you get the new UK IT & software tenders worth bidding on — curated by hand, not scraped and dumped.
- Hand-curated — no keyword spam, no duplicates
- Every notice with its buyer, value, deadline & how to bid
- One email a week — cancel anytime