Tenders

Renovation at Truman Hall Headquarters in Fort Belvoir, VA

W072 ENDIST LOUISVILLE

****This Solicitation is for Northeast Construction MATOC Only**** ****Amendment 0001 posted on 29 October 2026**** ****Amendment 0002 posted on 10 November 2026**** Login at https://piee.eb.mil and search for 'W912QR27Q1CQ2' to obtain more details.*

Solicitation W912CH-26-B-A002: Testing Kit, Aviation Petroleum

W6QK ACC- DTA

This Invitation for Bids (IFB) is intended to result in the award of a single, 5-Year Firm-Fixed-Price (FFP) Indefinite Delivery Indefinite Quantity contract for Testing Kits, Aviation Petroleum, National Stock Number (NSN): 6630-01-558 5109, Part Number: 57K6311. An IDIQ contract is a type of Indefinite-Delivery contact that provides for an indefinite quantity, within stated limits, during a fixed period. The quantities specified in the Schedule are estimates only and are not purchased by the resulting contract. Please see Revolutionary FAR Overhaul (RFO) Federal Acquisition Regulation (FAR) 52.216-22: Indefinite Quantity for additional information. This IFB will be competed as Full & Open. There is a Technical Data Package (TDP) associated with this procurement. The TDP is distribution code "C", which limits access to Government Agencies and their Contractors. Please see Section C.1. TDP Information for instructions on how to access this data. BIDDERS MUST ACCESS THE TDP PRIOR TO SUBMITTING A BID OR THE BID SUBMISSION WILL BE REJECTED. Bidders are advised to carefully read and understand this entire IFB, including Sections L and M, prior to submitting a bid for evaluation. The Government will evaluate bids without discussions/negotiations and does not assume the duty to search for data to cure problems it finds in any bid. Therefore, all information necessary for the review and evaluation of a bid is to be contained within the bid submission. Bidders must complete all necessary fill-ins and representations (if applicable) throughout this IFB. Failure to complete all required fill-ins and representations may result in the rejection of a bid. Bidders shall acknowledge receipt of all IFB amendments by the date and time indicated for receipt of bids. If this IFB is amended, all terms and conditions not modified remain unchanged. Please see Section A.4 Acknowledgement of Amendments and RFO FAR 52.214-3: Amendments to IFBs for additional information. All bids received i

Space Electronic Systems Prototype Development

NAVAL RESEARCH LABORATORY

KC-46A ADAL Apron and Hydrant Fueling Pits

US ARMY ENGINEER DISTRICT MOBILE

AM04** KC-46A ADAL Apron and Hydrant Fueling Pits at MacDill AFB, FL

NIST/G Trash and Recycling Removal New Contract

DEPT OF COMMERCE NIST

NIST/G Trash and Recycling Removal Services

Performance Based Support (PB Follow-On) Consumable Item Requirements

DLA AVIATION AT PHILADELPHIA, PA

The Defense Logistics Agency (DLA) Weapons Support Philadelphia is issuing this Sources Sought Notice / Notice of Intent to identify potential sources capable of furnishing the labor, materials, facilities, tooling, and test equipment required to manufacture various components across multiple weapon system platforms. The SCC is structured with a three-year base period of performance and two consecutive three-year option periods, yielding a total potential performance period of nine years. The active Sources Sought notice is being conducted specifically to satisfy the market research requirements prior to exercising the first three-year option. The Government anticipates soliciting and negotiating a sole-source or limited-source procurement under the authority of FAR 6.302-1 "Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements," under the Boeing Supplier Capabilities Contract (SCC). Platforms supported under this requirement include AV-8B, C-17, CH-47, F/A-18, F-15, KC-135, B-52, B-1, E-3, P-8, AGM-84, KC-46, AH-64, and AGM-86. A complete list of item descriptions and National Stock Numbers (NSNs) is provided in Attachment 1. Technical Data Notice: The Government does not own or possess the technical data packages (TDPs), engineering drawings, or proprietary specifications required to manufacture these items. Prospective contractors must independently possess or obtain the authorized technical data. Response Instructions & Source Approval Requirements: This notice is published for market research and informational purposes only; it does not constitute a Request for Proposals (RFP) or an authorization to incur costs. All responsible sources may submit a capability statement demonstrating their ability to satisfy this requirement. Capability statements received within fifteen (15) calendar days of this publication date will be considered. A determination by the Government not to complete this proposed action based upon respons

METER ANTENNA SYSTEM PARTS

NAVAL RESEARCH LABORATORY

This Notice of Intent is not a request for competitive proposals. This is not a solicitation or request for offers. No solicitation package is available and email requests will not be honored. Only one responsible source and no other supplies or services will satisfy agency requirements. The Naval Research Laboratory (NRL) intends to award a sole source purchase order to TELEMETRY & COMMUNICATIONS SYSTEMS, INC. of CHATSWORTH, CALIFORNIA to furnish: METER ANTENNA SYSTEM PARTS The North American Industry Classification System Code (NAICS) for this requirement is 334220 with the size standard of #1250 . The Federal Supply Code (FSC) / Product Service Code (PSC) procurement is 5985 . This purchase will be made utilizing Simplified Acquisition Procedures in accordance with: Federal Acquisition Regulation (FAR) Part 13.106-1(b) for purchases not exceeding the simplified acquisition threshold of $250,000. Interested parties may identify their interests and capability to respond to this requirement within ___/___ calendar days of the publication of this notice. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. A determination by the Government not to compete this proposed purchase order based upon response to this notice is solely within the discretion of the Government. No reimbursement for any cost connected with providing capability information will be provided. The point of contact is: Andrea Graves , email: andrea.l.graves6.civ@us.navy.mil. Please reference this Notice of Intent number, N00173-27-Q-5605 on your correspondence and in the “Subject” line of your email.

Notice of Intent Pyxis Service Agreement

247-NETWORK CONTRACT OFFICE 7 (36C247)

The Contractor shall provide services to perform repairs and preventive maintenance inspections of all ES Pharmacy Pyxis unites. Located throughout the hospital at Carl Vinson VA Medical Center, 1826 Veterans Blvd, Dublin, GA 31021. The contractor shall also provide Pharmacy access to the Knowledge Portal.

Devens MA- Devens RFTA- Graded Road Base/ Screened Loam/ Trap Stone- Supply

W6QK ACC-PICA

SOURCES SOUGHT NOTICE/ REQUEST FOR INFORMATION Devens MA- Devens RFTA- Graded Road Base/ Screened Loam/ Trap Stone- Supply This Request for Information (RFI) is issued solely for information and planning purposes and shall not be misconstrued as a Request for Quote (RFQ) nor does it constitute a commitment by the Government. All information submitted in response to this announcement is voluntary; the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. Not responding to this RFI does not preclude participation in any future RFQ, if any is issued. The U.S. Army Contracting Command – Rock Island- Fort Dix- is seeking potential sources for a 12-month Blanket Purchase Agreement (BPA) to provide on-call delivery of Bulk ITAM Materials (Graded Road Base, Screened Loam, and Trap Stone) to South Post Fort Devens, MA (DRFTA). Additional details of this project can be found in the draft Materials List, Performance Work Statement (PWS), and technical specifications which are also attached. Responses should address the following items: (1) Address any concerns or unclear information within the bulk materials delivery requirement, including the standard three (3) business days delivery notice. (2) Provide a capability statement for the particulars of this effort, including confirmation of capability to supply all three (3) materials- not necessarily all at once- in the estimated quantities and in strict accordance with MassDOT Standard Specifications Division III (M2.01.7): - 3/4" Graded Road Base (Estimated 2,500 Tons) - Screened Loam, screened to 1/2" maximum particle size (Estimated 500 Cubic Yards) - 1-1/2" Trap Stone (Estimated 500 Tons) (3) Confirm that certified scale weight slips (scale tickets) will accompany each truckload at the time of delivery to verify weight, and that delivery drivers can comply with the South Post access requirement to check in daily at

JWF/NFP Maintenance Service 2027 - 2031

W072 ENDIST HUNTINGTON

Contractor shall furnish all necessary management, personnel, materials, supplies, tools, equipment, fuel, and vehicles, except as otherwise noted in the Performance Work Statement, required to perform the Mowing and Maintenance Services for John W. Flannagan Dam Reservoir and North Fork of Pound River Lake, VA. All work shall be completed in accordance with the Performance Work Statement and terms and conditions of the contract. The not-to-exceed amount of $3,000,000.00 includes the base year and all options exercised.

6810--Albany VAMC Bulk Road Salt

242-NETWORK CONTRACT OFFICE 02 (36C242)

Combined Synopsis For Albany Bulk Road Salt

Food Waste Removal and Disposal Services - FCC Victorville

FAO

This is a combined synopsis/solicitation for the commercial services prepared in accordance with FAR Part 12, as supplemented with additional information contained in this notice. This announcement constitutes the only solicitation; a separate solicitation document will not be issued. The Federal Bureau of Prisons (BOP), Field Acquisition Office (FAO), intends to award a single-award indefinite delivery/requirements contract with firm-fixed unit pricing for Food Waste Removal Services at the Federal Correctional Complex (FCC) in Victorville, California. This acquisition is being conducted as a total small business set-aside under the authority of FAR Part 19. The applicable North American Industrial Classification (NAICS) code is 562111 , Solid Waste Collection, and the associated small business size standard applies. The anticipated contract term consists of one (1) 12-month base year, four (4) 12-month option years, and a 6-month extension to be exercised at the discretion of the Government. The solicitation is issued as a Request for Quotation (RFQ) and will be posted on SAM.gov. An award will be given to the quoter whose quotation represents the best value to the Government considering price and past performance factors identified in the solicitation. The contractor shall provide all personnel, equipment, transportation, labor, supervision, and materials necessary to perform biomedical waste removal services in accordance with the Statement of Work (SOW). Estimated quantities include, but are not limited to: Food Waste Disposal Services: 1,200 tons The solicitation RFQ package, including the Statement of Work, pricing schedule, provisions, and clauses, will be available through SAM.gov. Interested vendors are responsible for monitoring SAM.gov for amendments and additional information related to this solicitation. The solicitation incorporates applicable provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically a

Request for Information (RFI): Vehicle Integrated Point Enhanced RADIAC (VIPER) - Tracked Ground Vehicles

W6QK ACC-APG

Request for Preproposals for Vehicle Integrated Platform Enhanced RADIAC (VIPER): Non-GM Alternative Sensor Prototype for Tracked Tactical Ground Vehicles This requirement will be handled through the procedures established in the Broad Other Transaction Authority Announcement (BOTAA) Supporting Other Transaction Authority Agreements for Prototype Development Efforts for the JPEO CBRND – Combating Weapons of Mass Destruction (“JPEO-CBRND CWMD BOTAA-24-01”). Please review the BOTAA announcement and submission requirements in full prior to submitting a Pre-Proposal. Ensure that your submission references “CWMD BOTAA-24-01 VIPER_27-TRACK." Link to BOTAA: https://sam.gov/workspace/contract/opp/2d04622b25364669857a6a61c576ade9/view Pre-proposals are due no later than 12:00 PM EST on December 10, 2026. The full request for pre-proposals is attached to this posting.

Virtual Industry Day for Insurance Verification Services 2026

SUPPORT SERVICES SECTION(SS40)

Live Webinar Please join the Federal Emergency Management Agency (FEMA) for an overview of insurance verification needs. Registration Deadline: Requests must be completed by Tuesday, December 1, 2026, at 5:00 p.m. EST. Webinar Date: Tuesday, December 8, 2026, at 1:00 p.m. Eastern Standard Time (EST). What Will Be Discussed: • Brief overview of FEMA’s Individuals & Households Program (IHP) • Summary of services needed to support federal disaster assistance • Contract Overview • Q&A Session

Shipping and Storage Container

DLA LAND WARREN

THIS IS A 100% SMALL BUSINESS SET-ASIDE. Noun: Shipping and Storage Container, NSN: 8145-01-125-9717, P/N: 12304565, Quantity: 91 Each/100% Option, FOB: Destination. Technical Data is available for this procurement. The solicitation should be released to the web on or about 25 June 2026. See the solicitation for actual closing date. Once available, the solicitation can be downloaded from FedBizOpps (www.fbo.gov). **************************************************************************************************** EXPORT CONTROLLED Joint Certification Program (EXPORT CONTROL) You must be certified under the United States/Canada Joint Certification Program (JCP) (https://www.dla.mil/Logistics-Operations/Services/JCP/) to be granted access to the technical data (TDP) for this solicitation, via Contract Opportunities ( www.sam.gov ). To register, or to re-register, please select the DD Form 2345 link from the Joint Certification Program (JCP) Home page (https://www.dla.mil/Logistics-Operations/Services/JCP/) and follow the instructions for completion, noting the required documentation to submit with the form. Mail the Form 2345, along with the required documentation to to the address is provided on form; it CANNOT be faxed or emailed. The process should take no more than one week for you to be certified or denied for approval under the JCP. If you encounter problems, please contact JCP at 1-877-352-2255 or via email at JCP-ADMIN@DLA.MIL or dlacontactcenter@dla.mil. Your firm must request access to the TDP in Contract Opportunities (www.sam.gov) in addition to submitting the above form in order to be granted access to the TDP. Once these requirements have successfully been completed, you will be granted access to the TDP. If you do not have access to Contract Opportunities, recommend you register as soon as possible REVERSE AUCTION The solicitation will contain provision 52.215-9023, Reverse Auction, which allows for the use of a reverse auction as a pricing technique. Af

Low Level Cranes- CSO

W6QK ACC ANAD

Material Handling Equipment (MHE) Repair Services

NAVSUP FLT LOG CTR NORFOLK

This is a non-personal services Indefinite Delivery, Indefinite Quantity (IDIQ) contract to provide Material Handling Equipment (MHE) Repair Services to Naval Oceanographic Office (NAVOCEANO) located at Stennis Space Center, MS. ***Please see solicitation amendment N0018927QL011 0002 and the updated attachements***

Grease Traps Maintenance - Dover AFB

FA4497 436 CONS LGC

Dover Air Force Base has a requirement for Grease Trap Maintenance Services in accordance with the Performance Work Statement (PWS.) Please see Attachment 1 - Grease Trap Maintenance PWS for a complete description of services. This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Subpart 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and a written solicitation will not be issued. This solicitation is being issued as a Request for Quote (RFQ). The North American Industry Size Classification System (NAICS) code associated with this requirement is 562998 and the Small Business Size Standard associated with this NAICS is $16,500,000.00. The Provisions and clauses listed within this document and Attachment 3- Provisions and Clauses apply to this acquisition and can be viewed through internet access at https://www.acquisition.gov/far-overhaul. A site visit will not be conducted. Point(s) of Contact: Contract Specialist: A1C Bryce M. Ganske / bryce.ganske@us.af.mil / 302-677-5215 Contracting Officer: 1st Lt Jayden E. Thiergood / jayden.thiergood.1@us.af.mil / 302-677-5233 QUESTIONS RESPONSE DEADLINE: 16 November 2026; no later than 12:00 P.M. EST QUOTE RESPONSE DEADLINE: 25 November 2026; no later than 12:00 P.M. EST

Sources Sought for HOBAS pipe (centrifugally cast fiberglass-reinforced polymer mortar)

NAVFACSYSCOM HAWAII

The Government intends to procure, under only one responsible source, where no other suppliers or service will satisfy the agency requirements. The Naval Facilities Engineering Systems Command, Hawaii (NAVFAC Hawaii) is conducting market research to determine if other potential products/services can provide for a centrifugally cast fiberglass-reinforced polymer mortar (CCFRPM) pipe that has the equal performance and listing/approval requirements as the HOBAS pipe (CCFRPM pipe), manufactured by HOBAS Pipe USA, Inc., 1413 E. Richey Road, Houston, Texas 77073-3508. The alternate product/service must meet the following requirements and specifications: Centrifugally cast fiberglass-reinforced polymer (CCFRPM) pipe, manufactured and tested in accordance with ASTM D3262. Pipe sizes shall be 24-inch (DN 600, 25.8-inch OD) and 42-inch (DN 1050, 45.9-inch OD) nominal diameters. Manufactured by the centrifugal casting process to result in a dense, uniform, non-porous, corrosion-resistant, consistent composite structure. Interior surface of the pipe exposed to untreated sewer flow must provide crack and abrasion resistance. Exterior surface of the pipe must be comprised of a sand and resin layer that provides ultraviolet (UV) protection to the pipe exterior. Pipes must be Type 1, Liner 2, Grade 3 per ASTM D3262. Coupling joints must meet the requirements of ASTM D4161. Minimum pipe normal stiffness (SN) when tested in accordance with ASTM D2412 must be 46 pound per square inch (PSI). Resin System: Manufacturer must use only polyester resin systems with proven history of performance in this application. Historical data must be acquired from a composite material or similar construction and composition as the proposed product. Glass Reinforcement: The reinforcing glass fibers used to manufacture the components must be of the highest quality commercial grade E-glass filaments with binder and sizing compatible with impregnating resins. Silica Sand: Sand must be minimum 98% silica wi

H--FLEX – MODULAR SF6 ANALYZER

WESTERN-UPPER GREAT PLAINS REGION

Issued on November 10, 2026 The Western Area Power Administration, Upper Great Plains (UGP), intends to acquire, on a sole-source basis, a GasQuip Flex Modular SF6 Analyzer for the South Dakota Maintenance Office to support its missions. The resulting procurement will be conducted in accordance with FAR Part 12. WAPA requires continuous, uninterrupted testing of high-voltage sulfur hexafluoride (SF₆) and emerging eco-efficient dielectric gas mixtures (such as N₂/SF₆ blends) to safeguard grid reliability and regulatory compliance; market research indicates only the GasQuip FLEX satisfies all mission requirements. Unlike conventional analyzers with fixed sensor manifolds that require a full-chassis return to the OEM for mandatory annual calibration—creating 2- to 3-month operational testing blind spots or redundant backup acquisitions—the GasQuip FLEX uses proprietary, pre-calibrated modular sensors that can be field-swapped in under 60 seconds without taking the primary diagnostic unit out of service. Additionally, its modular multi-bay chassis accommodates future eco-gas modules within existing hardware to eliminate future capital obsolescence costs, while its integrated active hose evacuation function completely removes toxic decomposition byproducts (e.g., SO₂) and ambient moisture between test points to eliminate cross-contamination and prevent false hazard alerts without wasting insulating gas. THIS IS NOT A REQUEST FOR COMPETITIVE QUOTES. Capability statements must be received within three calendar days of this notice and should include documentation demonstrating the ability to meet the Government’s requirements. The Government reserves the right, in its sole discretion, to determine whether to compete this requirement based on the responses received. Questions concerning this notice may be directed to the Contract Officer, Irma Suryaty, at suryaty@wapa.gov.

Ross Springs Waterline Replacement

ASHLEY NATIONAL FOREST

This project includes the replacement of 4” asbestos cement pipe (abandoned in place) with 4” HDPE water main and associated valves and connections to laterals. The work includes; Installation of 4450 linear feet of 4” HDPE pipeline, most of which will be shallow bury or laid on cleared ground and covered with imported fill from a government source. Cover an additional 1150 linear feet of existing pipeline with imported fill from a government source. Installation of 2 combination air-vacuum valves with utility boxes. Installing associated valves, daylight drains, and pumpout drains; and connecting to existing lateral mains and services.

INFB - Enterprise Data Management System

FBI - REDSTONE ARSENAL

Nov 10, 2026 Update: The Government will extend the capabilities paper submission deadline to 4:00 PM Central Time (CT) on December 3, 2026 . This extension is being provided to allow interested parties additional time to prepare thorough and comprehensive responses. Nov 5, 2026: The FBI seeks industry input to better understand capabilities, technologies, and best practices for an enterprise data management system organized around eight functional layers (Ingestion, Storage, Metadata, Transformation, Feature Extraction, API, Application/Visualization, Infrastructure Management) with crosscutting capabilities for legal compliance, organizational consolidation, migration management, and performance measurement. Reference attached Request for Information (RFI).

Nabavka, skladištenje i zanavljanje keksa

DIREKCIJA ZA ROBNE REZERVE KANTONA SARAJEVO

SUPPLY AND DELIVERY OF ELECTRONIC AUTOMATED LOAD BOX SYSTEM

SA Bureau of Standards

Category: Other service activities Type: Request for Quotation Address: 1 Dr Lategan Road, Groenkloof, Tshwane, 0001 Compulsory briefing session. Bid validity: 120 days.