Tenders

MC CBRN Request For Information

FA8003 771 ENTERPRISE SOURCING SQ

This is a performance based, non-personal advisory and assistance services (A&AS) requirement in support of the AFMEDCOM A4/10C programs within the AFMEDCOM in accordance with established program goals and objectives for medical CBRN requirements and execution of medical CBRN defense. The Contractor shall provide a full-range of technical and analytical support for the DAF organizational medical CBRN requirements, readiness, and consequence management to provide installation/homeland and expeditionary/deployed medical response under the umbrella of Air Force Medical All Hazards Support concept. Technical support shall encompass medical CBRN expertise. The Government will retain rights to all intellectual property produced in the course of developing, deploying, training, using, and supporting the AFMEDCOM. The Government does not intend to award a contract on the basis of the RFI or otherwise pay for the information requested, responses will be treated as information only and not as a proposal.

NavGuide GPS Receivers

NUWC DIV NEWPORT

PLEASE READ THIS ENTIRE NOTICE CAREFULLY AS IT CONSTITUTES THE ONLY NOTICE THAT WILL BE ISSUED. This is a combined synopsis and solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6-Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This procurement is intended as a sole source requirement to BAE Systems. This solicitation is not a request for competitive quotes. However, all quotes received by the closing date will be considered by the Government for future requirements. A determination not to compete this proposed requirement based on responses to this solicitation is solely within the discretion of the Government. Quotes received will normally be considered solely for the purposes of determining whether to conduct a competitive procurement in the future. The NavGuide units are manufactured as a replacement for the DAGR units as the DAGRs are now discontinued. BAE is the only manufacturer of the GPS receiver that has the Selective Availability Anti-Spoofing Module (SAASM) and M-Code capability that supports the form factor and computer interface requirements supported by the NavGuide. Switching to another receiver would require a complete redesign of system hardware and software. Request for Quote (RFQ) Number is N66604-27-Q-0002. This requirement is being solicited on a sole-source basis. The North American Industry Classification System (NAICS) Code for this acquisition is 517410; the Small Business Size Standard is $44,000,000. The Naval Undersea Warfare Center Division Newport (NUWCDIVNPT) intends to award a Firm Fixed Price Type purchase order for the below items: CLIN 0001: Quantity of four (4) NavGuide Production, Part #: 766-0000-001 Delivery is F.O.B. Destination to Newport, RI 02841. Delivery m

48--PARTS KIT,BALL VALV

DLA LAND AND MARITIME

Command Wide Broad Agency Announcement for Naval Facilities Engineering and Expeditionary Warfare Center (NAVFAC EXWC) Research, Development, Testing, and Evaluation

NAVFAC SYSTEMS AND EXP WARFARE CTR

The primary objective of this work under Solicitation Number N3943026R5001 is to establish a scientifically sound methodology to quantify and evaluate per- and polyfluoroalkyl substances (PFAS) distributions in precipitation, ambient fog water, and ambient soils at multiple active U.S. Navy installations. Ultimately, this study aims to assess how atmospheric deposition (via rain and fog) contributes to PFAS concentrations found in surface soils, and to determine the ideal sample sizes needed to calculate reliable background threshold values (BTVs) for future Navy-wide environmental investigations.

JOHN DEERE 333G COMPACT SKID STEER

W6QM MICC-FT DRUM

Amendment 0001 Reason for this amendment is to note we are looking for a John Deere 333P, and a 2026 or newer skid steer. - John Deere Track 333P Compact Skid Steer With Digger/Tooth Bucket. !!!MUST TAKE TRADE IN OF OUR CURRENT BOBCAT SKID LOADER W/787 HOURS (SEE ATTACHED PHOTOS FOR REFRENCE)!!!! Desired Specs: Full Enclosed Cab w/ Heat and AC. Track Skid Steer. 2026 or newer model . 2 Remote Hydraulic Out Front. Engine Specifications Gross Rated Power: 100 hp (74.6 kW) at 2,500 rpm Net Peak Power:96.6 hp (72.0 kW) at 2,500 rpm Peak Torque: 291.3 ft.-lb. (395 Nm) at 1,700 rpm Displacement: 186.3 cu. in. (3.1 L) Capacities and Performance Rated Operating Capacity(ROC): 3,700 lb. (1,680 kg) Tipping Load: 10,570 lb. (4,799 kg) Operating Weight:12,100 lb. (5,493 kg) Fuel Tank: 30 gal (114 L) Max Travel Speed: 7.8 mph (12.6 kph)Hydraulics Standard Pump Flow: 25 gal/min (95 lt/min) High-Flow Option Pump Flow:41.1 gal/min (156 lt/min) System Pressure: 3,450 PSI (237.87 bar) Dimensions Length with Bucket: 146.07 in (3,710 mm) Width without Bucket: 80.71 in (2,050 mm) Height to Top of Cab: 86.7 in (2,200 mm) (Cab height to top is listed at 7.22 ft / approx. 86.6 in) Ground Clearance: 9.45 in (240 mm) Height to Hinge Pin: 131.89 in (3,350 mm) Max Dump Height: 106.1 in (2,690 mm)

Repair of Cartridge NIIN 001020351

NAVSUP WEAPON SYSTEMS SUPPORT MECH

The repair of Cartridge, NIIN 001020351.

Hydrophone Housings for US & FMS

NSWC CRANE

This contract was awarded as a firm fixed-price contract and on a limited-source competitive basis.

GAOA Trujillo Meadows Old Toilet Building Replacement RGNF

Rio Grande National Forest

This RFQ is herein cancelled and is being reissued. Q&A Clarification the number for this RFQ is 1240LP26Q0199 instead of 127EAY26Q0199. Please refer to 1240LP26Q0199 when submitting a quotation. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 1240LP26Q0199 is issued as a Request for Quotation (RFQ) for vaulted toilets placed in a remote outdoor setting, the exact dimensions are less important than the features. Therefore, the following features are requested: Double vault toilet brown in color, shake shingle roof , board & batten, barnwood, or lap walls with rock bottom ADA-Compliant construction plastic toilet riser, No urinal, 6-roll toilet paper dispense , solar vent fan, chain door strap. The U.S. Forest Service will excavate and finalize the sites, so the Contractor will only be required to deliver and place the double vault toilets at the designated areas. The Contractor is not responsible for site preparation, excavation, grading, or finishing. Delivery of three accessible concrete double vault toilets to: Trujillo Meadows Campground. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 332311. The small business size standard is 750 Employees This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.

NCFI Expansion Furniture

U. S. SECRET SERVICE

The U.S. Department of Homeland Security, U.S. Secret Service, Office of Procurement, awarded a GSA Multiple Award Schedule delivery order to Business Interiors, Inc. for furniture, design, freight, and installation supporting the National Computer Forensics Institute’s facility expansion in Hoover, Alabama. The award includes furnishings for administrative offices, classrooms, auditorium and lobby areas, food-service space, and conference rooms. Required items include workstations, desks, chairs, collaborative seating, classroom electrostatic-dissipating desks, booths, couches, and conference-room furniture. The delivery order was awarded on a limited-sources basis under FAR 8.4, Only One Source (except brand name). Business Interiors was the only source capable of providing the required furnishings and services at the required level of quality because it was already integrated with the City of Hoover’s concurrent NCFI facility-expansion project. Its project-specific furniture layouts, approved product configurations, infrastructure coordination, and installation sequencing were necessary to ensure compatibility with the facility’s architectural plans, fixed furniture, power and data connections, construction schedule, and installation activities. Use of another vendor would have required duplicative site surveys, design and engineering coordination, product matching, and separate delivery and installation planning, creating increased cost, schedule delay, and integration risk. The attached redacted justification provides the supporting rationale for this award.

6515--NX EQ Scanning Systems Ultrasonic Portable (VA-27-00010422)

SAC FREDERICK (36C10X)

1.0 DESCRIPTION THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation for bids, proposals, proposal abstracts, or quotations. The Department of Veterans Affairs (VA) Enterprise Procurement Office (EPO), formerly the Strategic Acquisition Center (SAC), is issuing this Sources Sought Notice as a means of conducting market research to identify qualified sources with the capability and resources to meet the Veterans Health Administration s (VHA) Non-Expendable Equipment National Program requirement for Scanning Systems Ultrasonic Portable. The EPO in conjunction with VHA is seeking qualified sources capable of supplying the brand name or equal Fujifilm® Sonosite Scanning Systems Ultrasonic Portable machines on an agency-wide basis. VA is contemplating the award of a single Requirements Contract with Firm-Fixed Price (FFP) orders IAW FAR 16.503, Requirements Contracts, to a supplier of this equipment. Respondents will be required to deliver complete ultrasonic scanning systems to VA medical centers and facilities throughout the United States. The associated North American Industry Classification System (NAICS) code for this procurement is 334510 Electromedical and Electrotherapeutic Apparatus Manufacturing and the associated size standard is 1,250 employees. The FAR Provision found at 52.204-7 requires that The Offeror shall have an active Federal Government contracts registration in the System for Award Management (SAM) when submitting an offer or quotation. You may access the SAM website at SAM.gov | Home. All respondents must be certified with the appropriate NAICS code on the SAM website. All SDVOSB/VOSB respondents must be verified in the SBA database at: https://www.sba.gov/veterans/#vetcert at the time of submission. Submissions for this Sources Sought Notice shall be submitted by email no later than October 19, 2026, at 12:00pm Eastern Time to the Contract Specialist and Contracting Officer at the following email addresses: Alanna.Wilson@va.gov Anthon

554 RHS 50 K Water Well Drilling System (Deployable)

FA5240 36 CONS LGC

Well Drilling Rig or water well drill kit capable of drilling up to 1,500 ft depth.

L099--ONSITE INSCRIPTION SERVICES FOR SOUTH FLORIDA NC

NATIONAL CEMETERY ADMIN (36C786)

36C78626Q0057 - On-Site Inscriptions for South Florida National Cemetery The purpose of this amendment is to clarify the due date and time for quote and sample submissions and to provide a revised combined synopsis/solicitation document. The response due date and time is 23 July 2026 at 10:00 a.m. CST. The revised Combined Synopsis/Solicitation document is attached separately to this amendment. The Combined Synopsis/Solicitation has been revised to reflect the correct submission date and time. Note: There will not be a SF30 to sign for this amendment. Quoters shall provide a statement of acknowledgement and receipt of any and all amendments. Should an amendment not be endorsed by the interested Quoter, the quote may be considered unacceptable and may be excluded from further consideration for award.

Multi-Phase Study to Examine Long-Term Applicability and Transferability of Crash Modification Factors - Phase I: Feasibility Study and Groundwork

693JJ3 ACQUISITION AND GRANTS MGT

X1DB--Conroe OPC 229,566 ANSI/BOMA 258,262 RSF

OFFICE OF CONSTRUCTION & FACILITIES MGMT (36C10F)

CONROE, TX OPC, 229,556 ANSI BOMA RLP Section 1.02 G shall be deleted and replaced, Due date extended to November 7, 2025.

L099--36C78626Q0061 - Onsite Inscription Services for Georgia National Cemetery

NATIONAL CEMETERY ADMIN (36C786)

36C78626Q0061 - Onsite Inscription Services for Georgia National Cemetery

L099--On-Site Inscription Services at Fort Jackson National Cemetery

NATIONAL CEMETERY ADMIN (36C786)

On-Site Inscription Services at Fort Jackson National Cemetery - MPS The purpose of this amendment is to address submitted questions. The response due date and time remains 24 July 2026 at 10:00 a.m. CST. Note: There will not be a SF30 to sign for this amendment. Quoters shall provide a statement of acknowledgement and receipt of any and all amendments. Failure to acknowledge all amendments may result in the Interested Quoter being considered non-responsive and ineligible for award. Questions and Answers: Q: Is historical annual workload data available for prior performance periods? A: The estimated quantities provided in the Price/Cost Schedule were developed by the Government using information available during acquisition planning and represent the Government's best estimates for this requirement. Offerors shall base their quotations on the estimated quantities provided. Historical workload data will not be released. Q: Is incumbent contractor information releasable? A: Information regarding prior contract awards is publicly available through SAM.gov. Offerors are encouraged to base their quotations on the requirements of the solicitation. Q: Have there been recurring performance challenges or common corrective action items under previous contracts? A: The Government will not provide information regarding the performance of prior contracts or contractors. Offerors shall prepare their quotes based on the requirements of the solicitation. Q: Are there identifiable seasonal periods where inscription volume increases significantly? A: The Government cannot guarantee future workload patterns. Offerors shall prepare their quotations based on the requirements of the solicitation and the estimated quantities provided in the Price/Cost Schedule. Q: Is dedicated on-site storage available for contractor equipment and consumable materials? A: The contractor's on-site inscription operations shall be conducted within the designated area identified in the Statement of Work. Offe

(TMDE) for the Emerson/Rosemount Compact Annubar Multivariable Flow Meter.

PORTSMOUTH NAVAL SHIPYARD GF

To procure calibration services from a certified/accredited Commercial Calibration Activity (CCA).This SOW establishes the requirements that all calibrations provided by the CCA must meet to be accepted by Portsmouth Naval Shipyard, in accordance with the requirements set forth by the NAVSEA Metrology and Calibration (METCAL) Technical Warrant Holder (TWH) directives (as directed in NAVSEA Letter Serial Number 09M/050 dated 07 Mar 2024).

Justification for Other than Full and Open Competition- Enhanced Metal Detectors

SECURITY TECHNOLOGY

The purpose of this action is to publicize the award of Contract 70T04026C7672N004 to CEIA USA Limited to provide the Transportation Security Administration (TSA) with Enhanced Metal Detectors (EMDs) and all associated services and support under the subject Justification and Approval. EMD systems are a type of transportation security equipment that are used to screen passengers at airport checkpoints. This Justification and Approval for Other than Full and Open Competition has been reviewed and approved in accordance with established TSA procedures and is hereby published in accordance with the Federal Acquisition Regulation (FAR) Subpart 6.3 and in accordance with the requirements of FAR 6.303-2, the justification for the use of the statutory authority under FAR Subpart 6.302-1 is justified by the following facts and rationale required under FAR 6.303-2. Any and all redactions in this published document (that is, language marked out or deleted) have been identified and confirmed by the Government as contract proprietary information which the Government must protect from unauthorized disclosure. As the Government's intent to acquire using other than full and open competition was previously published on the Government-wide point of entry (contract opportunities) and all public comments considered at the time, the Government does not intent to respond further concerning this publication.

Q--Occupational Therapy Services

INDIAN EDUCATION ACQUISITION OFFICE

Global Distribution Expeditionary Contract

DLA DISTRIBUTION

In accordance with RFO FAR 6.103-1, the Defense Logistics Agency (DLA) Distribution intends to issue modification P00024 against Contract SP330021D5002 on a sole source basis to Olgoonik Federal, LLC. This contract known as the Global Distribution Expeditionary Contract (GDEC) provides critical labor and distribution support for workload surges, unforeseen or unplanned requirements, contingency operations, humanitarian missions, labor augmentation, and special projects. The modification will increase the contract ceiling by $90,000,000.00, raising the total ceiling to $315,500,000.00. This increase is necessary because the current ceiling will be fully obligated prior to the end of the six month extension period, based on historical usage rates and projected surge and contingency requirements. The additional ceiling represents the minimum amount needed to maintain uninterrupted mission support.This action is being taken pursuant to RFO FAR 6.103-1(c)(2)(ii), as only the incumbent contractor, Olgoonik Federal, LLC, can provide the required services without unacceptable delays. Standing up a new contractor would require onboarding, security vetting, facility access approvals, training, and integration with DLA Distribution systems activities that cannot be completed within the required time frame. The incumbent currently maintains the necessary staffing, facilities, equipment, and materials to continue immediate performance.This temporary extension is required because follow on procurements the DLA Distribution Expeditionary Capabilities Contract (DECAP) and the DLA Distribution Labor Augmentation Contract will not be awarded in time to meet immediate and ongoing operational requirements.Without this ceiling increase and short term extension, DLA Distribution would not have a viable contract vehicle to support mission essential surge, contingency, humanitarian, or audit readiness requirements during the gap between the expiration of the current ordering period and the

Tornado Damage Repairs at the USDA-ARS U.S. Horticultural Research Laboratory, Ft. Pierce, Florida

USDA ARS AFM APD

F-16 Wheel Housing Section

FA8203 AFSC PZAAB2

SOLICITATION – F-16 Housing 1. REQUIREMENT OVERVIEW The Department of the Air Force (FA8203) is issuing Solicitation FA820326Q0017 for the procurement of: Noun: F-16 Landing Gear, Housing Section National Stock Number (NSN): 3010-01-071-2644 YP This requirement supports Foreign Military Sales (FMS). The total potential procurement quantity is up to 40 Each. 2. NOTICE OF INTENT TO SOLE SOURCE The Government intends to negotiate and award a contract on a sole-source basis to the Original Equipment Manufacturer (OEM), HAMILTON SUNDSTRAND Corp (CAGE: 99167), or an authorized vendor. HAMILTON SUNDSTRAND owns the proprietary rights for this NSN. However, all responsible sources may submit a capability statement, proposal, or quotation by the closing date of this announcement, which shall be considered by the agency. If another source proves they are authorized and capable of providing the exact part, the Government may evaluate that source for this or future procurement actions. 3. RESPONSE DEADLINE All quotes and capability statements must be submitted via email no later than November 6, 2026, at 3:30 MDT.

XP 30 Ton Outside Air System

W6QM MICC-FT DRUM

PATRIOT Engineering Services (ESM) 2027 - 2031

DLA LAND AT ABERDEEN

This notice indicates the Government’s intention to negotiate with Raytheon Company, Cage Code 05716, for a Patriot Engineering Services Memoranda contract. This effort will include engineering activities such as program management, configuration management, product assurance, logistics, system engineering, maintenance engineering, product engineering, software engineering, and testing for the PATRIOT Missile Weapon System and its continuous development. The Government is not in possession of either the Technical Data Package or Manufacturing Data Package of the PATRIOT system and its associated parts and testing equipment. This contract is a sole-source acquisition using justification 10 U.S. Code 3204 (a) (1), as stated in Federal Acquisition Regulation 6.103-1 and will be performed under Basic Agreement (SPRBL1-26-H-A001). This effort will be a 5-year contract with a base and four option periods. Locations of performance are inside and outside the continental United States, with a January 31, 2032, performance completion date. The using customer is the Army. The Army is solely responsible for the funding of this contract, and the contract varies in appropriations type and fiscal year. The contracting activity is the Defense Logistics Agency Weapons Support, Aberdeen Proving Ground, Maryland (SPRBL1-26-H-A001).