Tenders

Operations Mechanical BPA

W07V ENDIST ST LOUIS

S205--Sources Sought Crown Hill National Cemetery Trash Services

NATIONAL CEMETERY ADMIN (36C786)

Q: ***** a small business, intends to submit a quote for the Crown Hill National Cemetery solid waste removal requirement (RFQ 36C78627Q0004). ******* would serve as prime contractor for contract administration, while the on-site collection services would be performed by a licensed local waste hauler as our subcontractor. Could you please confirm whether the quoter may satisfy the Volume B technical qualifications (DOT registration verifiable in FMCSA SAFER, and the Indiana waste services license) and the Volume C past performance and three-year experience requirements through that subcontractor, which would perform 100% of the on-site services? A: Quoters are strongly encouraged to demonstrate their own relevant experience and capabilities. Reliance on subcontractor experience/ certifications/ licensing to meet these requirements is discouraged and may not be considered sufficient in the evaluation of proposals. Preference will be given to proposals wherein the prime contractor clearly illustrates its direct experience and ability to successfully perform the required work without significant dependence on subcontractor s past performance. Q: ******. is interested in establishing a business relationship with the Department of Veterans Affairs and providing dependable, professional service in support of the National Cemetery Administration. We would appreciate clarification on the following: The complete scope of trash collection and disposal services required. The anticipated frequency of service. Equipment, staffing, and insurance requirements. Whether a site visit or pre-bid meeting is available. Any additional amendments or instructions applicable to submitting a quotation. We would welcome the opportunity to compete for this contract and demonstrate our commitment to reliable service and professional performance. A: Interested vendors are strongly encouraged to read the solicitation documents prior to submitting questions. Quoters are responsible for evaluating

ARSR4 Collector Power Supply Test Station Solicitation

6973GH FRANCHISE ACQUISITION SVCS

11/10/2026- Amendment 0001 is to extend the due date until December 18th, 2026 2pm CST. All other terms and conditions remain the same. The Federal Aviation Administration (FAA) has a requirement for acquisition of ARSR4 Collector Power Supply Test Station (CPSTS) with functions similar to the current obsolete test station alone with test adapter and test/repair software needed to test and repair both FAA’s ARSR4 Collector Power Supply (CPS) and Preamplifier Power Supply (PPS) units to specification as outline in the statement of work. The NAICS CODE for this requirement will be 334290, Other Communications Equipment Manufacturing, with a Small Business Size Standard of 800. Full-and-open competition will be utilized for this requirement. Please read the attached Solicitation in its entirety and provide submittal as instructed in provision L.1 Instruction for Preparation and Submission of Proposal, page 53. The Offeror must provide the following information needed to aid in the determination of responsibility. The Offeror must submit: (a) Screening Information Request: This section must contain a copy of the solicitation duly executed by an official authorized to bind the offeror. 1. Section A, Solicitation, Offer and Award 2. Section B, Supplies or Services and Price/Cost 3. Section F, delivery schedule 4. Section K, Representations and Certifications (b) Pricing Proposal: This section must contain Contractor pricing. Note: The Government anticipates that pricing of this action will be based on adequate price competition; therefore, offerors are not required to submit with their offer, in support of their price, man-hours, material costs and any other recurring or non-recurring costs. If, however, competition does not materialize, the Contracting Officer may require upon request “other than certified cost and pricing” deemed necessary to adequately evaluate the reasonableness of the price. Examples of “other than certified cost and pricing” include competitive publ

RRC Services located within the city limits of the following cities within San Bernardino County, CA: San Bernardino, Fontana, Rancho Cucamonga, Bloomington, Colton, Grand Terrace, Highland, Loma Linda, and Redlands

RESIDENTIAL REENTRY - CO

RRC Services within the city limits of the following cities within San Bernardino County, CA: San Bernardino, Fontana, Rancho Cucamonga, Bloomington, Colton, Grand Terrace, Highland, Loma Linda, and Redlands and Home Confinement radius is within 100 miles of the RRC Facility.

DroneShield Immediate Response Kit Associated Equipment

FA3016 502 CONS CL

This Brand Name Only Request for Quote (RFQ) is issued in accordance with Federal Acquisition Regulation (RFO) Part 12 Acquisition of Commercial Products and Commercial Services, Simplified Procedures. 502 CONS/PKD will issue a single firm fixed-price purchase order for the associated equipment needed to operate the brand name DroneShield Immediate Response Kits (IRK). A single award will be to the responsible small business vendor whose quote confirms the terms and conditions of this solicitation and offers the best value to the Government. Best Value is defined as the lowest price technically acceptability quotation. Reference attached RFQ Cover Page for full details.

D--Special Notice of Intent to Sole Source Award

NOTICE OF INTENT TO AWARD A SOLE SOURCE CONTRACT THIS IS NOT A REQUEST FOR COMPETITIVE QUOTES. Agency: U.S. Fish and Wildlife Service (USFWS) Office: Idaho Fish and Wildlife Office Posting Type: Notice of Intent to Sole Source Authority: FAR 12102(a) - for acquisitions valued at or below the simplified acquisition threshold (SAT) of $350K. 1. Description of Requirement The U.S. Fish and Wildlife Service intends to award a firm-fixed-price sole source contract to the Idaho Department of Fish and Game (IDFG) for annual Idaho Fish and Wildlife Information System (IFWIS) species geospatial data exports. The contemplated subscription will be acquired in one-year increments over a five-year period. The purpose of this requirement is to support the conservation and recovery of native species and the habitats upon which they depend through the coordinated collection and exchange of information concerning the location and status of special-status species in Idaho. The subscription will enable IDFG to maintain the statewide species database, including the personnel, software, equipment, facilities, quality-control activities, documentation, updates, and storage needed for the Biotics Database and related species-specific conservation strategies. 2. Intended Sole Source Vendor Idaho Department of Fish and Game (IDFG) 600 S. Walnut ST Boise, Idaho 83712 3. Sole Source Justification Market research conducted by USFWS indicates that IDFG is the only responsible source reasonably available to provide the required IFWIS species geospatial data exports. The IFWIS program is housed within IDFG and is not available from any other source. IFWIS is a comprehensive statewide information system for standardizing data on Idaho fish, wildlife, and plants. Its data-management staff collaborate with federal, state, and nongovernmental organizations to curate information on an ongoing basis. Incoming data are assessed for quality and accuracy, and standardized fields are added, including taxon

Q403-RFP Medical Disability Examinations-Next Generation (MDE-NG)

SAC FREDERICK (36C10X)

The Department of Veterans Affairs (VA) is issuing the attached Request for Proposals (RFP) for Medical Disability Examinations – Next Generation (MDE-NG), Solicitation 36C10X27R0001 . This is the official solicitation for the MDE-NG requirement. Offerors are responsible for reviewing the complete solicitation, including all attachments, and complying with the requirements, instructions, submission procedures and deadlines stated in the RFP. The solicitation and any amendments issued under this notice supersede any prior draft solicitation materials. Communications and Questions All communications regarding this solicitation must be submitted via email to VAMDENextGenRFP@va.gov . Questions must be submitted in accordance with Section E of the solicitation, including use of the required RFP Questions Template and the deadline stated in the solicitation. Communications specific to this solicitation and its contents should not be directed to MDEO, VBA or other VA personnel. Offerors intending to submit a proposal must also provide the required Proposal Intention in accordance with Section E. Proposals must be submitted using the method and instructions specified in the solicitation and should not be submitted to the solicitation email address. Interested Vendors List VA has enabled the Interested Vendors List (IVL) for this solicitation and has made the list viewable to registered SAM.gov users. VA is making the IVL viewable to facilitate industry awareness and provide prospective prime contractors, subcontractors and teaming partners an opportunity to identify and connect with other interested parties. Vendors that wish to be identified as interested in this solicitation should use the Interested Vendors List functionality available through this SAM.gov notice. Participation in the IVL is voluntary and does not constitute VA endorsement of any vendor or teaming arrangement. Interested parties are encouraged to monitor SAM.gov for amendments and other updates related t

Solid Deicer for Fort Drum

W6QM MICC-FT DRUM

Amendment 0002: The purpose of this amendment is to update the minimum specifications and to extend the solicitation to Thursday, November 12th, 2026 at 1:00 PM EDT. End Amendment. Amendment 0001: The purpose of this amendment is to extend the solicitation to Tuesday, November 10th, 2026 at 1:00 PM EST. End Amendment. Solid Deicer delivery to Fort Drum. See attached solicitation for more details.

Y--GRCA 257282 - Replace Wastewater Plant at South Ri

DSC CONTRACTING SERVICES DIVISION

GRCA 257282 - Replace Wastewater Plant at South Rim Village

Request for Interested Manufacturers of the C-130 Aft Emergency Exit Door Assembly

DLA AVIATION AT WARNER ROBINS, GA

Request for Interested Manufacturers of the C-130 Aft Emergency Exit Door Assembly SUBJECT: Market research is being conducted to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for qualification and production of the C-130 Aft Emergency Exit Door Assembly (Escape Hatch), NSN: 1560-00-098-7967LG (Part Number: 342281). ITEM DESCRIPTION: The Aft Escape Hatch is utilized on many United States (US) and Foreign Military Sales (FMS) aircraft to include C-130H, LC130-H, EC-130H, C-130J, EC-130J, MC-130J, HC-130J, WC130-J, and AC130-J. The Hatch is an integrated part of the aircrafts external structure. It is made of an aluminum exterior skin, frame, diaphragm, and has pressure and weather seals. This hatch serves as a personnel emergency escape hatch during egress. The Escape Hatch has elastic bungees and an internal locking mechanism that allows for rapid emergency de-pressurization of the aircraft. The Department of the Air Force (DAF) has limited data right to the technical drawings. IMPEDIMENT TO COMPETITION: The original equipment manufacturer for this item is Lockheed Martin Corp (CAGE: 98897). Lockheed Martin’s escape hatches are the only approved hatches for use on the C-130s. The Government does not own any data, drawings, schematics, or any other releasable technical data in support of this requirement. Lockheed Martin has been unwilling to sell the data rights. All previous procurement contracts have been sole source with Lockheed Martin. INTEREST: The DLA/AWB Contracting Office intends to award a sole source contract to Lockheed Martin for the manufacture of the C-130 Aft Escape Hatch in support of the C-130 Structures Program. Other interested parties may identify their interest and capability to respond to the requirement no later than 25 November 2026 by emailing Adam Jones at adam.jones.19@us.af.mil and Rebecca Taylor at rebecca.taylor.21@us.af.mil. The Government intends to procure these item

Brandy Station Engine Rebuild

W074 ENDIST WILMINGTON

REBUILD (1) CUMMINS NT855M DIESEL ENGINE AND TWIN DISC CLUTCH

Venture-Class Acquisition of Dedicated and Rideshare (VADR) Launch Services

NASA KENNEDY SPACE CENTER

NASA Venture-Class Acquisition of Dedicated and Rideshare (VADR) Launch Services 2026 On-Ramp The NASA Venture-Class Acquisition of Dedicated and Rideshare (VADR) Launch Services Request for Proposal (RFP) was issued on May 27, 2021 and remains open for a period of five years from the effective date through the use of an innovative on-ramp provision found in Section 2.11, Clause 2.11.1. The VADR contract’s ordering period remains valid through five years from date of contract award. Currently, there are 13 eligible providers as part of the Indefinite Delivery Indefinite Quantity (IDIQ). These providers are Arrow Science and Technology, LLC, Astra Space, Inc., Blue Origin, LLC, Firefly Aerospace, Inc., Impulse Space, Inc., L2 Solutions, LLC, Momentus Space, LLC, Northrup Grumman System Corp., Phantom Space Corp., Relativity Space, Inc., Rocket Lab USA, Inc., Space Exploration Technologies, Corp., and United Launch Services, LLC. During the life of the solicitation and at the time established via synopsis, the Government will accept proposals from launch service providers for new IDIQ contracts. At a minimum, launch services proposed under VADR require the below: 1. Launch site agreements for at least one launch site to be used in support of task orders awarded under this contract. 2. Evidence of at least one of the following: Launch attempt (intentional ignition) of common launch vehicle configuration being proposed including, but not limited to, the outcome of the launch attempt Successful launch reaching an altitude of 100km or greater (can include any launch vehicle in the Offeror’s fleet) Development tests demonstrating at least 50% of the flight thrust at the complete full-scale single engine assembly level for all core stage engines of the common launch vehicle configuration being proposed. 3. If Offeror is proposing to use a launch vehicle provided by another company e.g., broker services, transfer vehicle, agreements will be required for each proposed vehicle

Boundary Flagging for Okmulgee & Miami Agency

EASTERN OKLAHOMA REGION

HAMMER,PILE DRIVER

The U.S. Coast Guard intends to award a sole source contract to (PILECO INC.) for (HAMMER, PILE DRIVER). This procurement is being conducted under the authority of FAR 13.106-1(b), which permits sole source awards when only one responsible source and no other supplies or services will satisfy agency requirements. (PILECO INC.) is the original equipment manufacturer (OEM) and possesses proprietary knowledge, technical expertise, and specialized capabilities that are essential to meet the requirements of this procurement. No other vendor has been identified that can provide the required goods/services with the same level of compatibility, quality, and performance. Key Details: LINE ITEM 1: Vendor Name: PILECO INC NAICS Code: 333120 Item Name: HAMMER, PILE DRIVER, NSN: 3895-01-681-8298 PN: D6-42 OR 6-32-T019 Qty: 03 EA Packaging Requirements: PRESERVATION: THE CONTRACTOR SHALL PREPARE AND COAT ALL EXTERIOR AND INTERIOR SURFACES, AS APPLICABLE AS PER ASTM D3951-98. ALSO TO PREPARE FOR TRAVEL, INSTALL SAFETY/PROTECTION CLAMPS, COVERS, SCREWS, AND CAPS IN ACCORDANCE WITH SECTION 3 OF TECHNICAL PUBLICATION 3124. INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073- L E METHOD 10, UTILIZING CUSHIONING, BLOCKING AND BRACING INSIDE A TYPE V, STYLE B COVERED REUSABLE CRATE WITH LAG BOLTS CONFORMING TO ASTM D6039. THESE HAMMERS MUST BE CRATED TO PROTECT THEM FROM MULTIPLE CROSS COUNTRY SHIPMENTS. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY. PACKAGE LABEL: ITEM NAME: PART NUMBER: NSN: QNTY: (EXAMPLE 1 EA) COND-A CONTRACT NUMBER / ORDER NUMBER. This Notice of Intent is not a request for competitive proposals. However, any interested party that believes it can fulfill the requirements may submit a capability statement to the point of contact listed below. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this proposed p

USBC Weinberger Lower Floor Kitchenette Upgrade

In accordance with FAR 5.101(b)(1)(i), this is a 15 day presolicitation notice that GSA will solicit contractors to refresh of the fourth-floor kitchenette of the Weinberger Courthouse in San Diego, CA. This effort includes isolating an electrical circuit and replacing existing cabinet doors and associated hardware, as well as the installation of new countertops and backsplash material.

Undersea Warfare Combat Systems Product Support Contract Extension

The Naval Sea Systems Command (NAVSEA) intends to utilize other than full and open competition to award a contract modification to the existing awarded contract N00024-22-C-5231 to extend the period of performance through fiscal year (FY) 2028. The base contract was awarded to Leidos, Inc. of Reston, Virginia (1750 Presidents Street, Reston, Virginia 20190-5661) for installation, spares procurement, integrated logistic support, fleet maintenance support, and lifecycle sustainment of the U.S. Navy’s AN/SQQ-89 Surface Ship Undersea Warfare Combat Systems in support of Portfolio Acquisition Executive Mission Systems PMW 650. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one source under authority FAR 6.103-1. No other company could make these supplies on a timeline that would serve the Government’s needs. This notice is not a request for competitive proposals. Interested persons may identify their interest and capability to respond to the requirements. However, all expressions of interest received within fifteen (15) days after the date of publication of this synopsis, will be considered by the Government. Any submission will not be reimbursed by the Government and the entire cost of any submission will be at the sole expense of the source submitting the information. A determination by the Government not to compete this proposed contract, upon receipt of responses, is the sole discretion of the Government. Note: This is a synopsis intended to provide potential offerors with a summary of the subject procurement. This notice is for information only, is subject to modification, and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. If a solicitation is issued in the future, it will be announced via the SAM.gov page

F-16 Plug-In Unit, Electr

DLA AVIATION AT OGDEN, UT

Combined Request for Information and Synopsis This notice is a combined Request for Information and Synopsis. The primary purposes of this notice are as follows: Conduct market research to determine if other sources capable of satisfying the agency’s requirements exist and if commercial items or non-developmental items are available that meet the agency’s requirements. Improve small business access to acquisition information. Enhance competition by identifying contracting and subcontracting opportunities. This announcement is not a Request for Proposal or an Invitation for Bid, nor is it to be construed as a commitment by the Government. The Government does not intend to contract based on this request or otherwise pay for any information solicited herein. Interested parties should contact April Blakeley at 385-591-8032 or email april.blakeley@us.af.mil Detailed Information Noun: Plug-In Unit, Electr NSN: 6625-01-675-0492WF P/N: 2218520-001 Estimated Quantity: 4 EA Destination: SW3210 Estimated Delivery Schedule: 31 October 2028 Set-aside: It is NOT expected that this requirement will be set-aside for small businesses Statements Authority: 10 U.S.C. 2304(c)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement contact the following firm(s): BAE Systems (Cage 12436) Based upon market research, the Government is not planning on using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. All responsible sources may submit a capability statement, proposal, or q

J--MT-BOZEMAN FHC- GENERATOR REPAIR/WATER PUMP REPAIR

MT-BOZEMAN FHC- GENERATOR REPAIR/WATER PUMP REPAIR

X1DB--FY27 New: Primary Care Clinic Vero Beach New Lease

248-NETWORK CONTRACT OFFICE 8 (36C248)

Description of Amendment 1. 36C248-26-R-0042 - Global Request for Lease Proposal RLP Template R100 June 2025 is deleted in full and replaced by 36C248-26-R-0042 - Global Request for Lease Proposal -RLP- Template R100 -May 2026 2. Exhibit A - 36C248-26-L-0007 - Global Lease Template L100 Sep 2025 is deleted in full and replaced by Exhibit A - 36C248-26-L-0007 - Global Lease Template L100 -May 2026 3. Exhibit F - 3516 Solicitation Provisions Feb 2025 is deleted in full and replaced by Exhibit F - 3516 Solicitation Provisions Feb 2025 4. Exhibit G - 3517B General Clauses Feb 2025 is deleted in full and replaced by Exhibit G - 3517B General Clauses Apr. 2026 5. Exhibit N - Deliverables IAW RLP 36C248-26-R-0042 is deleted in full and replaced by Exhibit N - Offeror Deliverables Submittals and Requirements IAW RLP 36C248-26-R-0042 6. The Due Date for responses is extended to no later than 3:00 PM ET on December 15, 2026

Boiler Plant Parts - Reno VAMC

261-NETWORK CONTRACT OFFICE 21 (36C261)

Contractor shall provide Boiler Plant Parts IAW the terms and conditions in this solicitation.

N6449826Q5248 Industrial Workhorses

NSWC PHILADELPHIA DIV

The contractor shall supply twelve (12) 150,000 lbs. (75 ton) industrial work horses and six (6) 150,000 lbs. (75ton) per specifications in Section 3.0. Shipping shall be included with the price. The contractor shall deliver the Industrial Work Horses to NFPC. Delivery Location: Naval Foundry and Propeller Center 2003 Constitution Ave Building 1081 Philadelphia Navy Yard Philadelphia, PA 19112 Shipping Receiving Hours of Operation - M/F 0730-1400 Please Email Proposals to christopher.m.mccarthy26.civ@us.navy.mil and anthony.j.diplacido.civ@us.navy.mil. The following questions Were asked and below are there responses. Many questions were similar in nature and are thus being grouped together as they all have the same answer which is providing in a word document in the attachment/links section. NO QUESTIONS ASKED VIA EMAIL AFTER 3 NOVEMBER 2026 CAN BE GUARRANTED TO BE ANSWERED.

7016226765 – SPE4A727R0085 – 1560 - Deployment Support / Helicopter, UH-60A, UH-60L, UH-60V

DLA AVIATION

The Defense Logistics Agency is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for NSN: 1560-016784601, Deployment Support. The NSN has a Contractor First Article Test (FAT) requirement. Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s). Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The quantity needed is 5 KT. The unit prices will be established at the time of a contract award. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336413. THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. If your organization has the potential capacity to perform these contract services, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should a