Public tenders
Tenders
Live results from every procurement portal we monitor. Refine the search using the filter bar above.
51,707 matching · page 594 of 2,155
Integrated Emergency X-ray Diagnostic System 1Sets
National University Corporation - Fukui
⑴ Official in charge of disbursement of the procuring entity : Dou Yuji, The Obligating Officer Director of Finance Department, University of Fukui ⑵ Classification of the products to be procured : 22, 31 ⑶ Nature and quantity of the products to be purchased : Integrated Emergency X-ray Diagnostic System 1Sets ⑷ Delivery period : By 31 December, 2026 ⑸ Delivery place : University of Fukui Hospital ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 6 of the Regulation concerning the Contract for University of Fukui Furthermore, minors, Person under Conservatorship or Person under Assistance that obtained the consent necessary for concluding a contract may be applicable under cases of special reasons within the said clause, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Tokai・Hokuriku area in sales of product and offer of services for participating in tenders by Single qualification for every ministry and agency, C prove to have prepared a system to provide rapid after-sale service and maintenance for the procured products, D prove to have obtained license for selling and repairing a medical instrument in accordance with the Law on Securing Quality, Efficacy and Safety of Products including Pharmaceuticals and Medical Devices, E not be currently under a suspension of business order as instructed by The Obligating Officer. ⑺ Time limit of tender : 17 : 00 2 September, 2026 ⑻ Contact point for the notice : Igarashi Akihiro, Procurement Section, Accounting Division, Finance Department, University of Fukui, 23-3 Matsuokashimoaizuki Eiheiji-cho Yoshida-gun Fukui 910-1193 Japan, TEL 0776-61-3111 ex. 3145 ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0022 Medical/Dental/Surgical & Veterinary Equipment 0031 Medical Instruments & Appa
Collection transportation and disposal of infectious medical waste 1 set
National University Corporation - Ishikawa
⑴ Official in charge of disbursement of the procuring entity : Takashi Wada, President, Kanazawa University ⑵ Classification of the services to be procured : 78 ⑶ Nature and quantity of the services to be required : Collection transportation and disposal of infectious medical waste 1 set ⑷ Fulfillment period : From 1 October, 2026 through 30 September, 2027 ⑸ Fulfillment place : Kanazawa University Hospital ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 30 and 31 of the Regulation concerning the Contract for Kanazawa University, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Tokai・Hokuriku area in offer of services for participating in tenders by Single qualification for every ministry and agency, C meet the qualification requirements which President, Kanazawa University may specify in accordance with Article 32 paragraph 3 of the Regulation, D not be currently under a suspension of business order as instructed by President, Kanazawa University. ⑺ Time limit of tender : 17 : 00 21 August, 2026 ⑻ Contact point for the notice : Tatsuya Kawada, Procurement management Section, Hospital Management Division, Hospital Department, Kanazawa University, 13-1 Takara-machi Kanazawa-shi 920-8641 Japan, TEL 076-265-2067 ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0078 Sewage & Refuse Disposal/Sanitation & other Environmental Protection Services
Fuel oil JIS class 1 No.2 340KL
National University Corporation - Ishikawa
⑴ Official in charge of disbursement of the procuring entity : Takashi Wada, President, Kanazawa University ⑵ Classification of the products to be procured : 2 ⑶ Nature and quantity of the products to be purchased : Fuel oil JIS class 1 No.2 340KL ⑷ Delivery period : From 1 October, 2026 through 30 September, 2027 ⑸ Delivery place : The places specified by President ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 30 and 31 of the Regulation concerning the Contract for Kanazawa University, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Tokai・Hokuriku area in sales of product for participating in tenders by Single qualification for every ministry and agency, C meet the qualification requirements which President, Kanazawa University may specify in accordance with Article 32 paragraph 3 of the Regulation, D not be currently under a suspension of business order as instructed by President, Kanazawa University. ⑺ Time limit of tender : 14 : 00 25 September, 2026 ⑻ Contact point for the notice : Masashi Kobayashi, Procurement management Section, Financial Management Division, Finance Department, Kanazawa University, Kakuma-machi Kanazawa-shi 920-1192 Japan, TEL 076-264-6162 E-mail zaityot@adm.kanazawa-u.ac.jp ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0002 Mineral Products
Digital X-ray fluoroscopy system 1 Set
National University Corporation - Tokyo
⑴ Official in charge of disbursement of the procuring entity : FUJII Teruo, President of the University of Tokyo ⑵ Classification of the products to be procured : 22, 31 ⑶ Nature and quantity of the products to be manufactured : Digital X-ray fluoroscopy system 1 Set ⑷ Delivery period : By 12 March, 2027 ⑸ Delivery place : The University of Tokyo Hospital ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 2 and 3 of the Regulation concerning the Contract for The University of Tokyo, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Kanto-Koshinetsu area in manufacture of product or sales of product for participating in tenders by Single qualification for every ministry and agency, C prove to have prepared a system to provide research, rapid after-sale service and maintenance for the procured products, D meet content specified in the tender documentation, E not be currently under a suspension of business order as instructed by President of the University of Tokyo. F prove to have obtained license for selling a medical instrument in accordance with the Law on Securing Quality, Efficacy and Safety of Products including Pharmaceuticals and Medical Devices, ⑺ Time limit of the documents : 17 : 00 24 August, 2026 ⑻ Contact point for the notice : SAKAIZUMI hajime, Contract Group, Finance Department, The University of Tokyo, 7-3-1 Hongo Bunkyo-ku Tokyo 113-8654 Japan, TEL 03-5841-2148, URL : https://www.u-tokyo.ac.jp/ja/ about/procurement-contracts/nyusatsu/ index.php ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0022 Medical/Dental/Surgical & Veterinary Equipment 0031 Medical Instruments & Apparatus
Next Generation Sequencer 1 Set
National University Corporation - Tokyo
⑴ Official in charge of disbursement of the procuring entity : FUJII Teruo, President of the University of Tokyo ⑵ Classification of the products to be procured : 24 ⑶ Nature and quantity of the products to be manufactured : Next Generation Sequencer 1 Set ⑷ Delivery period : By 26 February, 2027 ⑸ Delivery place : The UTOPIA Center ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 2 and 3 of the Regulation concerning the Contract for The University of Tokyo, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Kanto-Koshinetsu area in manufacture of product or sales of product for participating in tenders by Single qualification for every ministry and agency, C prove to have prepared a system to provide research, rapid after-sale service and maintenance for the procured products, D meet content specified in the tender documentation, E not be currently under a suspension of business order as instructed by President of the University of Tokyo. ⑺ Time limit of the documents : 17 : 00 17 August, 2026 ⑻ Contact point for the notice : SAKAIZUMI hajime, Contract Group, Finance Department, The University of Tokyo, 7-3-1 Hongo Bunkyo-ku Tokyo 113-8654 Japan, TEL 03-5841-2148, URL : https://www.u-tokyo.ac.jp/ja/ about/procurement-contracts/nyusatsu/ index.php ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0024 Professional/Scientific & Controlling Instruments & Apparatus
Ultra-high-resolution nano 3D stereolithography system using two-photon polymerization 1 set
National University Corporation - Tokyo
⑴ Classification of the products to be procured : 24 ⑵ Nature and quantity of the products to be purchased : Ultra-high-resolution nano 3D stereolithography system using two-photon polymerization 1 set ⑶ Delivery period : by 31 March, 2027 ⑷ Delivery place : Institute of Science Tokyo Ookayama area ⑸ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 7 and 8 of the Regulation concerning the Contract for Institute of Science Tokyo, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Kanto・Koshinetsu area in sales of product for participating in tenders by Single qualification for every ministry and agency, C meet the qualification requirements which Institute of Science Tokyo may specify in accordance with Article 6 of the Regulation, D not be currently under a suspension of business order as instructed by Institute of Science Tokyo. ⑹ Time limit of tender : 17 : 00 17 August, 2026 ⑺ Contact point for the notice : Norimitsu Suwa, Procurement Division, Finance Department, Institute of Science Tokyo, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 Japan, TEL 03-5734-2355 e-mail : proc.oka4@adm.isct.ac.jp ⑻ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0024 Professional/Scientific & Controlling Instruments & Apparatus
Design Verification Environment Development for High-Dependability RISC-V Processor System 1 set
National University Corporation - Tokyo
⑴ Classification of the products to be procured : 71 ⑵ Nature and quantity of the products to be purchased : Design Verification Environment Development for High-Dependability RISC-V Processor System 1 set ⑶ Delivery period : From 4 September, 2026 through 31 March, 2027 ⑷ Fulfillment place : Institute of Science Tokyo Ookayama area ⑸ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 7 and 8 of the Regulation concerning the Contract for Institute of Science Tokyo, B have the Grade A, Grade B, Grade C or Grade D qualification during fiscal 2026 in the Kanto・Koshinetsu area in offer of services for participating in tenders by Single qualification for every ministry and agency, C meet the qualification requirements which Institute of Science Tokyo may specify in accordance with Article 6 of the Regulation, D not be currently under a suspension of business order as instructed by Institute of Science Tokyo. ⑹ Time limit of tender : 17 : 00 17 August, 2026 ⑺ Contact point for the notice : Norimitsu Suwa, Procurement Division, Finance Department, Institute of Science Tokyo, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 Japan, TEL 03-5734-2355 e-mail : proc.oka4@adm.isct.ac.jp ⑻ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0071 Computer & Related Services
FPGA Implementation of High-Dependability RISC-V Processor System 1 set
National University Corporation - Tokyo
⑴ Classification of the products to be procured : 71 ⑵ Nature and quantity of the products to be purchased : FPGA Implementation of High-Dependability RISC-V Processor System 1 set ⑶ Delivery period : From 4 September, 2026 through 31 March, 2027 ⑷ Fulfillment place : Institute of Science Tokyo Ookayama area ⑸ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 7 and 8 of the Regulation concerning the Contract for Institute of Science Tokyo, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Kanto・Koshinetsu area in offer of services for participating in tenders by Single qualification for every ministry and agency, However, entities rated as Grade D are also eligible, provided they meet the technical requirements. C meet the qualification requirements which Institute of Science Tokyo may specify in accordance with Article 6 of the Regulation, D not be currently under a suspension of business order as instructed by Institute of Science Tokyo. ⑹ Time limit of tender : 17 : 00 17 August, 2026 ⑺ Contact point for the notice : Norimitsu Suwa, Procurement Division, Finance Department, Institute of Science Tokyo, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 Japan, TEL 03-5734-2355 e-mail : proc.oka4@adm.isct.ac.jp ⑻ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0071 Computer & Related Services
Nuclear magnetic resonance system 1 set
National University Corporation - Tokyo
⑴ Official in charge of disbursement of the procuring entity : Naoto Ohtake, President, Institute of Science Tokyo ⑵ Classification of the products to be procured : 24 ⑶ Nature and quantity of the products to be purchased : Nuclear magnetic resonance system 1 set ⑷ Delivery period : by 19 March, 2027 ⑸ Delivery place : Institute of Science Tokyo Ookayama area ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 7 and 8 of the Regulation concerning the Contract for Institute of Science Tokyo, B have the Grade A, Grade B, Grade C or Grade D qualification during fiscal 2026 in the Kanto・Koshinetsu area in sales of product for participating in tenders by Single qualification for every ministry and agency, C meet the qualification requirements which Institute of Science Tokyo may specify in accordance with Article 6 of the Regulation, D not be currently under a suspension of business order as instructed by Institute of Science Tokyo. ⑺ Time limit of tender : 17 : 00 17 August, 2026 ⑻ Contact point for the notice : Norimitsu Suwa, Procurement Division, Finance Department, Institute of Science Tokyo, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 Japan, TEL 03-5734-2355 e-mail : proc.oka4@adm.isct.ac.jp ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0024 Professional/Scientific & Controlling Instruments & Apparatus
A Next Generation Sequencing System 1set,Ｂ Laser Micro Dissection System 1set,Ｃ Imaging-Enabled Cell Sorter System 1set
National University Corporation - Tokyo
⑴ Official in charge of disbursement of the procuring entity : Naoto Ohtake, President, Institute of Science Tokyo ⑵ Classification of the products to be procured : 24 ⑶ Nature and quantity of the products to be purchased : A Next Generation Sequencing System 1set B Laser Micro Dissection System 1set C Imaging-Enabled Cell Sorter System 1set ⑷ Delivery period : A, B, C By 15 March, 2027 ⑸ Delivery place : A, B, C By Institute of Science Tokyo Yushima Campus, Institute of Integrated Research ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 7 and 8 of the Regulation concerning the Contract for Institute of Science Tokyo, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Kanto・Koshinetsu area in sales of product for participating in tenders by Single qualification for every ministry and agency, C meet the qualification requirements which Institute of Science Tokyo may specify in accordance with Article 6 of the Regulation, D not be currently under a suspension of business order as instructed by Institute of Science Tokyo. E prove to have prepared a system to provide rapid after-sale service and maintenance for the procured products, ⑺ Time limit of tender : 17 : 00 17 August, 2026 ⑻ Contact point for the notice : Tomoko Hiraki, Yushima Accounting Section, Financial Division, Institute of Science Tokyo, 1-5-45 Yushima Bunkyo-ku Tokyo 113-8510 Japan, TEL 03-5803-5945 ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0024 Professional/Scientific & Controlling Instruments & Apparatus
Chiba University Hospital bedside system 1 Set
National University Corporation - Chiba
⑴ Official in charge of disbursement of the procuring entity : Osamu Tabata, The Obligating Officer Administration Bureau, Chiba University ⑵ Classification of the products to be procured : 22, 31 ⑶ Nature and quantity of the products to be purchased : Chiba University Hospital bedside system 1 Set ⑷ Delivery period : By 31 March, 2027 ⑸ Delivery place : Chiba University Hospital ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 5 and 6 of the Regulation concerning the Contract for Chiba University, Furthermore, minors, Person under Conservatorship or Person under Assistance that obtained the consent necessary for concluding a contract may be applicable under cases of special reasons within the said clause, B have the Grade A, Grade B, Grade C or Grade D qualification during fiscal 2026 in the Kanto・Koshinetsu area in sales of product for participating in tenders by Single qualification for every ministry and agency, or in tenders by National University Corporation, C prove to have prepared a system to provide rapid after-sale service and maintenance for the procured products, D prove to have the ability to deliver the products, required by this notice, on the date and to the place specified by the Obligating Officer, E meet the qualification requirements which The Obligating Officer, Administration Bureau, may specify in accordance with Article 7 of the Regulation, F not be currently under a suspension of business order as instructed by The Obligating Officer. ⑺ Time limit of tender : 17 : 00, 24 August, 2026 ⑻ Contact point for the notice : Sasaki Yuka, Procurement Group, Management Division, Chiba University Hospital, 1-8-1 Inohana Chuo-ku Chiba-shi 260-8677 Japan, TEL 043-226-2237 ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0022 Medical/Dental/Surg
3D Micro X-ray CT System for Experimental Animals 1 Set
National University Corporation - Chiba
⑴ Official in charge of disbursement of the procuring entity : Osamu Tabata, The Obligating Officer Administration Bureau, Chiba University ⑵ Classification of the products to be procured : 24 ⑶ Nature and quantity of the products to be purchased : 3D Micro X-ray CT System for Experimental Animals 1 Set ⑷ Delivery period : By 28 December, 2026 ⑸ Delivery place : Inohana Campus ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 5 and 6 of the Regulation concerning the Contract for Chiba University, Furthermore, minors, Person under Conservatorship or Person under Assistance that obtained the consent necessary for concluding a contract may be applicable under cases of special reasons within the said clause, B have the Grade A or Grade B qualification during fiscal 2026 in the Kanto・Koshinetsu area in sales of product for participating in tenders by Single qualification for every ministry and agency, or in tenders by National University Corporation, C prove to have prepared a system to provide rapid after-sale service and maintenance for the procured products, D prove to have the ability to deliver the products, required by this notice, on the date and to the place specified by the Obligating Officer, E meet the qualification requirements which The Obligating Officer, Administration Bureau, may specify in accordance with Article 7 of the Regulation, F not be currently under a suspension of business order as instructed by The Obligating Officer. ⑺ Time limit of tender : 17 : 00, 18 August, 2026 ⑻ Contact point for the notice : Nakashima Takumi, Contract Group, Management and Budget Division, Inohana Area Administrative Office, Chiba University, 1-8-1 Inohana Chuo-ku Chiba-shi 260-8670 Japan, TEL 043-226-2989 ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0024
Core Switch System 1 Set
National University Corporation - Saitama
⑴ Official in charge of disbursement of the procuring entity : TSUBOTA Tomohiro, The Obligating Officer Director-General Administration Bureau, Saitama University ⑵ Classification of the products to be procured : 14 ⑶ Nature and quantity of the products to be purchased : Core Switch System 1 Set ⑷ Rent period : From 1, March, 2027 through 29, February, 2032 ⑸ Rent place : Saitama University ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 4 and 5 of the Regulation concerning the Contract for Saitama University, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Kanto・Koshinetsu area in offer of services for participating in tenders by Single qualification for every ministry and agency or in tenders by Saitama University, C prove to have the ability to rent the products concerned by themselves and by a third party, should the products requested through this notice be rent by a third party, D not be currently under a suspension of business order as instructed by Saitama University. ⑺ Time limit of tender : 17 : 00 29 September, 2026 ⑻ Contact point for the notice : NAGAI Yu, Accounting Division, Finance Department, Saitama University, 255 Shimo-ohkubo Sakura-ku Saitama-shi 338-8570 Japan, TEL 048-858-3016 ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0014 Office Machines & Automatic Data Processing Equipment
Adobe Software License 1 Set
National University Corporation - Yamagata
⑴ Official in charge of disbursement of the procuring entity : Masaki Nakanishi, Director of Kojirakawa Campus,The National University Corporation Yamagata University ⑵ Classification of the services to be procured : 71, 27 ⑶ Nature and quantity of the services to be required : Adobe Software License 1 Set ⑷ Fulfillment period : From 1 November, 2026 through 31 October, 2029 ⑸ Fulfillment place : The places specified by Director of Kojirakawa Campus ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 5 and 6 of the Regulation concerning the Contract for The National University Corporation Yamagata University Furthermore, minors, Person under Conservatorship or Person under Assistance that obtained the consent necessary for concluding a contract may be applicable under cases of special reasons within the said clause, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Tohoku area in offer of services for participating in tenders by Single qualification for every ministry and agency, C meet the qualification requirements which Director of Kojirakawa Campus, The National University Corporation Yamagata University may specify in accordance with Article 7 of the Regulation, D not be currently under a suspension of business order as instructed by this university. ⑺ Time limit of tender : 10 : 30 7 September, 2026 ⑻ Contact point for the notice : Shigeru Suzuki, Procurement Section, General Affairs Division, Department of Kojirakawa Campus Services, Yamagata University, 1-4-12 Kojirakawa-machi Yamagata-shi 990-8560 Japan, TEL 023-628-4891 ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0027 Computer Services 0071 Computer & Related Services
Centrifugal pump device system 1 set
National University Corporation - Akita
⑴ Official in charge of disbursement of the procuring entity : MINAMIYA Yoshihiro, President of The National University Corporation Akita University ⑵ Classification of the products to be procured : 22, 31 ⑶ Nature and quantity of the products to be purchased : Centrifugal pump device system 1 set ⑷ Delivery period : By 31 March, 2027 ⑸ Delivery place : Akita University Hospital ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 47 and 48 of the Regulation concerning the Contract for Akita University Furthermore, minors, Person under Conservatorship or Person under Assistance that obtained the consent necessary for concluding a contract may be applicable under cases of special reasons within the said clause, B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Tohoku area in sales of product for participating in tenders by Single qualification for every ministry and agency, C prove to have prepared a system to provide rapid after-sale service and maintenance for the procured products, D prove to have obtained license for selling a medical instrument in accordance with the Law on Securing Quality, Efficacy and Safety of Products including Pharmaceuticals and Medical Devices, E meet the qualification requirements which Chief Accounting Officer may specify in accordance with Article 49 of the Regulation, F not be currently under a suspension of business order as instructed by President of The National University Corporation Akita University. ⑺ Time limit of tender : 17 : 00 3 September, 2026 ⑻ Contact point for the notice : TAKA-HASHI Daiju, Accounting Division, Akita University Graduate School of Medicine and Faculty of Medicine, 1-1-1 Hondo Akita-shi 010-8543 Japan, TEL 018-884-6249 ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 00
Polymer Material Characterization System 1 Set
National University Corporation - Miyagi
⑴ The same as the notice above No.24. ⑵ Classification of the products to be procured : 24 ⑶ Nature and quantity of the products to be purchased : Polymer Material Characterization System 1 Set ⑷ Delivery period : By 26 February, 2027 ⑸ Delivery place : Graduate School of Engineering, Tohoku University ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A The same as the notice above No.24. B have the Grade A, Grade B or Grade C qualification during fiscal 2026 in the Tohoku area in sales of product for participating in tenders by Single qualification for every ministry and agency, or in tenders by Tohoku University, C The same as the notice above No.24. D The same as the notice above No.24. ⑺ Deadline for submission of documents : 17 : 00 18 August, 2026 ⑻ The same as the notice above No.24. ⑼ The same as the notice above No.24. 0024 Professional/Scientific & Controlling Instruments & Apparatus
Carbon and Sulfur Analyzer 1 Set
National University Corporation - Miyagi
⑴ Official in charge of disbursement of the procuring entity : Hitoshi Izu, Vice President, Tohoku University ⑵ Classification of the products to be procured : 24 ⑶ Nature and quantity of the products to be purchased : Carbon and Sulfur Analyzer 1 Set ⑷ Delivery period : By 19 March, 2027 ⑸ Delivery place : Graduate School of Engineering, Tohoku University ⑹ Qualifications for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : A not come under Article 6 of the Regulation concerning the Contract for Tohoku University. Furthermore, minors, Person under Conservatorship or Person under Assistance that obtained the consent necessary for concluding a contract may be applicable under cases of special reasons within the said clause, B have the Grade A, Grade B, Grade C or Grade D qualification during fiscal 2026 in the Tohoku area in sales of product for participating in tenders by Single qualification for every ministry and agency, or in tenders by Tohoku University, C prove to have prepared a system to provide rapid after-sale service and maintenance for the procured products, D not be currently under a suspension of business order as instructed by Vice President, Tohoku University. ⑺ Deadline for submission of documents : 17 : 00 17 August, 2026 ⑻ Contact point for the notice : Hiroaki Kawamura, Procurement Services Office, Finance Department, Tohoku University, 2-1-1 Katahira Aoba-ku Sendai-shi 980-8577 Japan, TEL 022-217-4869, URL : https://www.bureau.tohoku.ac.jp/ keiyaku/kouhyou/ ⑼ Please be noted that if it is indicated that environmental conditions relating to the procurement are laid down in its tender documents. 0024 Professional/Scientific & Controlling Instruments & Apparatus
2 units of Truck with Traffic Sign
West Nippon Expressway Company Limited. - Fukuoka
⑴ Official in charge of the contract of the procuring entity : Daizo Nishioka Director General of Kyushu Branch, West Nippon Expressway Company Limited ⑵ Classification of the products to be procured : 17 ⑶ Nature and quantity of the products to be purchased : 2 units of Truck with Traffic Sign ⑷ Delivery period : From the next day of a contract through 540 day, ⑸ Delivery place : As shown in the specifications ⑹ Qualification for participating in the tendering procedures : Suppliers eligible for participating in the open tender are who shall : ① not come under Article 6 of the administrative instruction of the Contractual Rules of the West Nippon Expressway Company Limited ② submit a copy of a tax payment certificate published within the past three months and formulated in either formats of 3-2 or 3-3 prescribed by Article 9 of the Enforcement Regulations of the National Tax Act ③ have proven to have actually manufactured or delivered the products concerned for public facilities such as expressways, toll roads, railways, or airports after fiscal year 2011 (including deliveries made as an agent) ④ have proven to have prepared a system to provide rapid after-sale service and maintenance for the products concerned ⑺ Time-limit for the submission of application forms and relevant documents for the qualification : 4 : 00 P.M. 6 August 2026 ⑻ Time-limit for the submission of tender : 4 : 00 P.M. 13 October 2026 ⑼ The language used for application and inquiry shall be Japanese. ⑽ Contact point for tender documentation : Accounting Division, General Affairs and Planning Department, Kyushu Branch, West Nippon Expressway Company Limited, 3-13-15, Hakataekihigashi, Hakata-Ward, Fukuoka City, Fukuoka Prefecture 812-0013 Japan Tel. 092-260-6115 0017 Road Vehicles
9 units of Sprinkler Truck
West Nippon Expressway Company Limited. - Fukuoka
⑴ Official in charge of the contract of the procuring entity : Daizo Nishioka Director General of Kyushu Branch, West Nippon Expressway Company Limited ⑵ Classification of the products to be procured : 17 ⑶ Nature and quantity of the products to be purchased : 9 units of Sprinkler Truck ⑷ Delivery period : From the next day of a contract through 660 day, ⑸ Delivery place : As shown in the specifications ⑹ Qualification for participating in the tendering procedures : Suppliers eligible for participating in the open tender are who shall : ① not come under Article 6 of the administrative instruction of the Contractual Rules of the West Nippon Expressway Company Limited ② submit a copy of a tax payment certificate published within the past three months and formulated in either formats of 3-2 or 3-3 prescribed by Article 9 of the Enforcement Regulations of the National Tax Act ③ have proven to have actually manufactured or delivered the products concerned for public facilities such as expressways, toll roads, railways, or airports after fiscal year 2011 (including deliveries made as an agent) ④ have proven to have prepared a system to provide rapid after-sale service and maintenance for the products concerned ⑺ Time-limit for the submission of application forms and relevant documents for the qualification : 4 : 00 P.M. 6 August 2026 ⑻ Time-limit for the submission of tender : 4 : 00 P.M. 13 October 2026 ⑼ The language used for application and inquiry shall be Japanese. ⑽ Contact point for tender documentation : Accounting Division, General Affairs and Planning Department, Kyushu Branch, West Nippon Expressway Company Limited, 3-13-15, Hakataekihigashi, Hakata-Ward, Fukuoka City, Fukuoka Prefecture 812-0013 Japan Tel. 092-260-6115 0017 Road Vehicles
7 units of Truck with Wet Salt Sprinkler
West Nippon Expressway Company Limited. - Fukuoka
⑴ Official in charge of the contract of the procuring entity : Daizo Nishioka Director General of Kyushu Branch, West Nippon Expressway Company Limited ⑵ Classification of the products to be procured : 17 ⑶ Nature and quantity of the products to be purchased : 7 units of Truck with Wet Salt Sprinkler ⑷ Delivery period : From the next day of a contract through 540 day, ⑸ Delivery place : As shown in the specifications ⑹ Qualification for participating in the tendering procedures : Suppliers eligible for participating in the open tender are who shall : ① not come under Article 6 of the administrative instruction of the Contractual Rules of the West Nippon Expressway Company Limited ② submit a copy of a tax payment certificate published within the past three months and formulated in either formats of 3-2 or 3-3 prescribed by Article 9 of the Enforcement Regulations of the National Tax Act ③ have proven to have actually manufactured or delivered the products concerned for public facilities such as expressways, toll roads, railways, or airports after fiscal year 2011 (including deliveries made as an agent) ④ have proven to have prepared a system to provide rapid after-sale service and maintenance for the products concerned ⑺ Time-limit for the submission of application forms and relevant documents for the qualification : 4 : 00 P.M. 6 August 2026 ⑻ Time-limit for the submission of tender : 4 : 00 P.M. 13 October 2026 ⑼ The language used for application and inquiry shall be Japanese. ⑽ Contact point for tender documentation : Accounting Division, General Affairs and Planning Department, Kyushu Branch, West Nippon Expressway Company Limited, 3-13-15, Hakataekihigashi, Hakata-Ward, Fukuoka City, Fukuoka Prefecture 812-0013 Japan Tel. 092-260-6115 0017 Road Vehicles
Automatic Telephone Exchange Equipment 1set
Japan Water Agency - Mie
⑴ Contracting Entity : Hirotaka Takeuchi, Director of Kizugawa Dams Integrated Operation and Management Office, Japan Water Agency ⑵ Classification of the products to be procured : 15, 28 ⑶ Nature and quantity of the products to be purchased : Automatic Telephone Exchange Equipment 1set ⑷ Delivery period : By 19 March 2027 ⑸ Delivery place : As in the tender documentation ⑹ Qualification for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : ① have the qualification to participate of "Electric Communications Equipment" for participating in tenders by Japan Water Agency. ② not correspond to the requirements for disqualification. ⑺ Time limit of tender : 17 : 00, 2 September 2026 ⑻ Contact point for the notice : Accounting Section, Kizugawa Dams Integrated Operation and Management Office, Japan Water Agency 2811-2 Shimohinachi, Nabari City, Mie Prefecture 518-0413, Japan TEL 0595-64-8961, FAX 0595-64-8964 0015 Telecommunications & Sound Recording & Reproducing Apparatus & Equipment 0028 Telecommunications Products
Procurement of a 3D Imaging Measurement System for Construction Materials, 1 set
Public Works Research Institute - Ibaraki
⑴ Official in charge of disbursement of the procuring entity : Koh-ichi Fujita, President of Public Works Research Institute ⑵ Classification of the products to be procured : 13, 26 ⑶ Procurement of a 3D Imaging Measurement System for Construction Materials, 1 set ⑷ Delivery period : 26 February, 2027 ⑸ Delivery place : As shown in the tender documentation ⑹ Qualification for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : 1)Persons or corporations whose conducts have not come under Article 5 of the Public Works Research Institute Contract Code. 2)have Grade A, B, C or D on "Manufacturing of producuts" or "Selling of products" in terms of qualification for participating in tenders by (Single qualification for every ministry and agency) in the fiscal year 2025, 2026 and 2027. 3)not be under suspension of nomination by Director General of National Institute for Land and Infrastructure Management from Time-limit for the submission of application forms and relevant documents for the qualification to Bid Opening. ⑺ Time-limit for the submission of application forms and relevant documents for the qualification : 16 : 00, 17 August, 2026 ⑻ Time-limit for tender : 17 : 00, 23 October, 2026 ⑼ Contact point for the notice : Yuto Sudo, Accounting Division, General Affairs Department, Public Works Research Institute, 1-6 Minamihara Tsukuba-shi, Ibaraki-ken, 305-8516 Japan. TEL 029-879-6878 0013 General Industrial Machinery & Equipment/& Machine Parts 0026 Miscellaneous Articles
4inch- and 8inch- auto prober for evaluating superconductor and opto-quantum devices 1 set
National Institute of Advanced Industrial Science and Technology - Ibaraki
⑴ Official in charge of disbursement of the procuring entity : HASHIMOTO Takuya Director-Procurement Division for National Institute of Advanced Industrial Science and Technology ⑵ Classification of the products to be procured : 24 ⑶ Nature and quantity of the products to be purchased : 4inch- and 8inch- auto prober for evaluating superconductor and opto-quantum devices 1 set ⑷ Delivery period : March 24, 2027 ⑸ Delivery place : National Institute of Advanced Industrial Science and Technology ⑹ Qualification for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : ① not come under Article 7 and 8 of the Cabinet Order concerning the Contract for AIST. ② have Grade A, B or C in terms of the qualification for participating in tenders by National Institute of Advanced Industrial Science and Technology (in the fiscal year of 2025, 2026 and 2027) ⑺ Time-limit for Tender : 17 : 00, September 1, 2026 ⑻ Contact point for the notice : TAKADA Ikuko, Tsukuba Central 1, Procurement Division, National Institute of Advanced Industrial Science and Technology, 1-1-1 Higashi, Tsukuba, Ibaraki, 305-8561 Japan. TEL 050-3521-0389 0024 Professional/Scientific & Controlling Instruments & Apparatus
Sorption-type dilution refrigerator 1 set
National Institute of Advanced Industrial Science and Technology - Ibaraki
⑴ Official in charge of disbursement of the procuring entity : HASHIMOTO Takuya Director-Procurement Division for National Institute of Advanced Industrial Science and Technology ⑵ Classification of the products to be procured : 24 ⑶ Nature and quantity of the products to be purchased : Sorption-type dilution refrigerator 1 set ⑷ Delivery period : February 26, 2027 ⑸ Delivery place : National Institute of Advanced Industrial Science and Technology ⑹ Qualification for participating in the tendering procedures : Suppliers eligible for participating in the proposed tender are those who shall : ① not come under Article 7 and 8 of the Cabinet Order concerning the Contract for AIST. ② have Grade A, B or C in terms of the qualification for participating in tenders by National Institute of Advanced Industrial Science and Technology (in the fiscal year of 2025, 2026 and 2027) ⑺ Time-limit for Tender : 17 : 00, September 1, 2026 ⑻ Contact point for the notice : TAKAYA Maki, Tsukuba Central 1, Procurement Division, National Institute of Advanced Industrial Science and Technology, 1-1-1 Higashi, Tsukuba, Ibaraki, 305-8561 Japan. TEL 050-3521-3542 0024 Professional/Scientific & Controlling Instruments & Apparatus
DataMesh Tender Radar
Win more UK IT & software tenders — one curated email a week
We watch Find a Tender & Contracts Finder so you don't have to. Every Monday you get the new UK IT & software tenders worth bidding on — curated by hand, not scraped and dumped.
- Hand-curated — no keyword spam, no duplicates
- Every notice with its buyer, value, deadline & how to bid
- One email a week — cancel anytime