Tenders

Bulk Oxygen and Tank Rental for Oklahoma City VA Health Care System Base Plus 4 Option Years

NETWORK CONTRACT OFFICE 19 (36C259)

Amendment 0001 for solicitation 36C25926Q0814 is to: 1) Post Questions and Answers for RFQ 36C25926Q0814; 2) Post “Attachment-Updated Statement of Work for OKC Bulk Oxygen and Tank Rental 09-15”; Quotes due to jesse.sannicolas@va.gov no later than 12:00pm ET, September 17, 2026. Acknowledgement of all solicitation amendment(s) with submission is required. See attached document: Questions and Answers for RFQ 36C25926Q0814 OKC Bulk Oxygen and Tank Rental. See attached document: Attachment-Updated Statement of Work for OKC Bulk Oxygen and Tank Rental 09-15.

6830--Bulk Oxygen and Tank Rental for Oklahoma City VA Health Care System Base Plus 4 Option Years

NETWORK CONTRACT OFFICE 19 (36C259)

Award Notice for 36C25927P0009 Bulk Oxygen and Tank Rental for Oklahoma City VA Health Care System.

HVAC Replacement/Repair Base-wide

W7NV USPFO ACTIVITY OKANG 138

RFB to Lease the Stow-Hardy House at Minute Man National Historical Park

NER NORTHEAST REGION(40000)

Summary of the Opportunity This Request for Bids (RFB) provides the opportunity for interested individuals and organizations to submit bids to the National Park Service (NPS) to lease NPS property for residential use (single family) at Minute Man National Historical Park under the following general terms and conditions. See attached “Draft Lease” for complete terms of occupancy. Property Offered for Lease Stow-Hardy House The Stow-Hardy house is located at 965 Lexington Road, Concord, Massachusetts, 01742. It is approximately 2,400 Sq. Ft with 3 bedrooms and 2.5 bathrooms and is situated on an approximately 0.4-acre landsite. The colonial style home was built circa 1786 and has been completely restored and renovated while retaining its original central arch chimney, oak timber framing, cedar shingle roof, and historic siding. The house has had significant mechanical upgrades including new plumbing, septic, heating, and electrical systems as well as a new smart washer and dryer. The kitchen features new stainless-steel appliances and a central island with farmhouse sink. The historic Battle Road Trail is located nearby, behind a mature Black Walnut grove. The trail is used year-round and provides the opportunity for various outdoor activities and connects the historic towns of Concord and Lexington. Uses of the Leased Property This lease is most suitable for low-impact, non-transient, residential occupancy of the house. The lessee is authorized to use the property as an occupant of the house and must be willing to become a part of the National Historical Park’s relationship with the public by maintaining the historic and well-tended appearance of the structure and grounds. In accordance with the attached draft lease, the lessee is responsible for all utilities and routine maintenance. The lessor will perform basic maintenance of the property as described in the lease. Term of Lease The lease will have a maximum term of three years. Lessee termination rights (terminat

U--Alternate Assessments, CAO

INDIAN EDUCATION ACQUISITION OFFICE

Alternate Assessments, CAO

Network Services – AFRICOM CENTCOM EUCOM (NS-ACE) MAC IDIQ

DISA/DITCO EUROPE

The purpose of Amendment 0005 is as follows: A. Revise the solicitation in its entirety, to include the PWS and all other attachments; and B. Provide responses to questions from industry. To be considered for award, offerors shall acknowledge receipt of all amendments to this solicitation by the closing date and time specified below. The Government will not consider offers received prior to the issuance of Amendment 0005. As a result of this amendment, the submission deadline has been extended to 04 November 2026 at 10:00 Central European Time (CET). Questions/comments must be received via email using the Attachment L1 NS-ACE Question and Answer Spreadsheet no later than October 21, 2026, at 10:00AM CET. In order to respond to this solicitation, the offeror shall email a copy of its proposal to the KO and CS no later than the time and date specified in the solicitation. ///// The purpose of this amendment is to extend the proposal due date to 23 October 2026 at 10:00AM CET. We anticipate an additional amendment with Q&A responses will be posted within the next two weeks. The Government will not accept additional questions at this time. ///// The purpose of this amendment is to extend the proposal due date to 18 September 2026 at 10:00AM CEST. The Government is working through the questions received and will provide an additional amendment and extension once answers are finalized. The Government will not accept additional questions at this time. All other terms and conditions remain unchanged. ///// The purpose of this amendment is to extend the proposal due date to 28 August 2026 at 10:00AM CEST. The Goverment is working through the questions received and will provide an additional amendment and extension once answers are finalized. The Government will not accept additional questions at this time. All other terms and conditions remain unchanged. ///// The purpose of this amendment is to extend the proposal due date to 07 August 2026 at 10:00AM CEST. The Goverment is

Base-wide Overhead Doors Repair

W7NV USPFO ACTIVITY OKANG 138

95--WAPA-wide Steel Structures IDIQ

WESTERN-CORPORATE SERVICES OFFICE

THIS IS A REQUEST FOR INFORMATION (RFI) NOTICE ONLY. THIS IS NOT A REQUEST FOR QUOTES (RFQ). NO SOLICITATION IS AVAILABLE AT THIS TIME. The Western Area Power Administration (WAPA) is issuing an RFI as a means of conducting market research to obtain information from companies with the capability to provide galvanized steel substation structures and lattice towers. There are multiple WAPA sites eligible for delivery of these steel structures located throughout the following states: Arizona, California, Colorado, Iowa, Minnesota, Montana, Nebraska, New Mexico, North Dakota, South Dakota, Utah, and Wyoming. Delivery points for the steel structures will be in surface storage areas adjacent to all-weather roads. The contractor is required to have relevant industry knowledge and experience in fabrication of structural steel components and structures. The contractor must have established fabrication, welding, inspection, galvanizing, quality assurance and quality control shop practices. Engineering and drafting services are required for design and shop drawings. Skilled labor is required for welding, fabrication, and galvanizing. Individual delivery orders vary from single lattice tower pieces, substation equipment supports, platforms, multiple complex substation structures, and complete microwave towers. The contractor shall be able to cut, bend, fit up, and weld steel plates, shapes, tubes, and bars. Fabricators must be able to operate and maintain heavy duty equipment including a press break, drilling machinery, plasma cutting table, seam welding, and have the ability to galvanize large components (approximately 5 ft x 5 ft x 35 ft). Delivery must be provided across WAPA's footprint. Submission Instructions: Interested parties who consider themselves qualified to provide the supplies required as identified above are invited to submit a response to this RFI Notice by 10/07/2026 at 08:00 PM MD. Submissions shall include the following information: 1) Organization name, add

NAICS 237990 PSC Y1PZ--CONS: 909CM3030 Fort Custer NC - Cemetery Expansion and Site Improvements (VA-26-00046764)

NATIONAL CEMETERY ADMIN (36C786)

10/5/2026 This Amendment is to provide one additional RFI response. 10/1/2026 This amendment is to incorporate wage determinations MI20260061 and MI2026008 and to extend the bid due dat/time to 10/6/2026 at 10AM CT. 9/29/2026 This amendment is to provide additional RFI Answers and documents. 9/25/2026 This amendment is to provide additional RFI Answers and documents. 9/24/2026 This amendment to solicitation number 36C78626B0005 for project number 909CM3030 Cemetery Expansion and Site Improvements at Fort Custer National Cemetery is to extend the bid due date/time to 10/2/2026 at 10:00AM (CT). 9/18/2026 This amendment to solicitation number 36C78626B0005 for project number 909CM3030 Cemetery Expansion and Site Improvements at Fort Custer National Cemetery is to: A. Extend the bid due date and time to September 25, 2026 at 10:00AM (CT). B. Provide answers to the RFI questions C. Incorporate the attached updated Drawings D. Incorporate the attached updated specifications E. Incorporate FAR Clause 52.211-11 Liquidated Damages-Supplies, Services, or Research and Development 9/16/2026 This amendment to solicitation number 36C78626B0005 for project number 909CM3030 Cemetery Expansion and Site Improvements at Fort Custer National Cemetery is to extend the bid due date/time to 9/21/2026 at 10:00AM (CT). 9/2/2026 This amendment to solicitation number 36C78626B0005 for project number 909CM3030 Cemetery Expansion and Site Improvements at Fort Custer National Cemetery is to provide clarification of site visit time and date. Project Title: Fort Custer National Cemetery – Cemetery Expansion & Site Improvements Project Number: 909CM3030 Procurement Method: Invitation for Bid (IFB) – Sealed Bidding Agency: Department of Veterans Affairs (VA) National Cemetery (NCA) Place of Performance: Fort Custer National Cemetery, 15501 Dickman Rd, Augusta, Michigan49012 1. Project Overview (Summary of Bid Items) The contemplated contract will include the following work as shown in the constructi

Custom Aluminum Corner and Top Extrusions, Mill Finish, 6005A-T61 Alloy

ORNL UT-BATTELLE LLC-DOE CONTRACTOR

UT-Battelle, LLC. (the Company), is the Management and Operations Contractor for the Oak Ridge National Laboratory (ORNL), located in Oak Ridge, Tennessee. The Company seeks proposals for the Custom Aluminum Corner and Top Extrusions, Mill Finish, 6005A-T61 Alloy, or their domestic equivalents, to support a department of Energy (DOE) funded project. Request for Quotation - RFQ - PR509394, Custom Aluminum Corner and Top Extrusions, Mill Finish, 6005A-T61 Alloy Attachment A - Terms and Conditions - Purchase Order Commercial Products and Services, dated 09.30.2026 Attachment B - Prime Flowdown Clauses, dated 09.30.2026 Attachment C - Bill of Materials - PR509394 Attachment D - Reps and Certs - Abbreviated - 03.09.2026 FAR 52.211-6, Brand Name or Equal applies.

PIGA Float Assembly Repair Program

FA8214 AFNWC PZBB

Login at https://piee.eb.mil and search for 'FA821426RB002' to obtain more details.* Documents related to this procurment are only available through PIEE. 1. Executive Summary: Background & Objective The U.S. Air Force has a critical requirement to support the Minuteman III (MMIII) Intercontinental Ballistic Missile (ICBM) by maintaining the operational readiness of the Missile Guidance Set (MGS) to meet warfighter requirements. Specifically, this effort supports the repair line for the Pendulous Integrated Gyroscopic Accelerometer (PIGA) Float Assembly. The PIGA Float is a critical and precise sub-assembly that serves as the heart of the PIGA instrument, enabling it to measure missile acceleration. Each MGS contains three separate PIGA instruments (each housing a PIGA Float). Without this critical component, the ICBM would cease to function properly. The PIGA Float repair effort is a continuous operation necessary to avoid mission degradation. Quality control and precision engineering are paramount due to the strategic importance of the MMIII weapon system. The contractor must maintain stringent quality assurance protocols to guarantee that each repaired PIGA Float meets the rigorous military specifications. 2. Scope of Work The contractor shall provide the necessary personnel, facilities, and expertise to support the PIGA Float Assembly repair line. The primary scope includes: Repair Operations - The re-manufacture, rebuild, and repair of PIGA Float Assemblies. Volume / Throughput - The repair of 96 PIGA Floats per year. Government Furnished Equipment (GFE) - The repair and/or replacement of GFE as required to support continuous operation of the PIGA Float repair line 3. Contract Structure & Period of Performance The Government anticipates awarding an Indefinite Delivery/Indefinite Quantity (IDIQ) contract utilizing a mix of Cost-Plus-Fixed-Fee (CPFF) and Firm-Fixed-Price (FFP) pricing arrangements. Contract Duration - 5-Year IDIQ Anticipated Ordering Period - 1 N

PASS-A-GRILLE-PASS, MAINTENANCE DREDGING, PINELLAS COUNTY, FLORIDA

W074 ENDIST JACKSNVLLE

THIS NOTICE IS POSTED FOR INFORMATIONAL PURPOSES ONLY: NOTICE OF INTENT TO ORDER: THIS OPPORTUNITY IS AVAILABLE ONLY TO THE FOLLOWING CONTRACTORS AWARDED A CONTRACT UNDER SOLICITATION NUMBER W912EP25R0010: AGM Marine Contractors Inc. (W912EP25D0011); AHTNA Marine and Construction Company LLC (W912EP25D0012); Atlantic and Gulf Dredging and Marine LLC (W912EP25D0013); Coastal Dredging Co., Inc. (W912EP25D0014); Cottrell Contracting Corporation (W912EP25D0015); Next Generation Logistics LLC. (W912EP25D0016); Southern Dredging Co, Inc. (W912EP25D0017); Southwind Corporation Corp. (W912EP25D0018); and Waterfront Property Services LLC Gator Services (W912EP25D0019). A Pre-Proposal Conference will be held via teleconference on 04 November 2026 @ 10:00AM, EST. Please utilize the link and call information provided below: - LINK: HTTPS://WWW.MICROSOFT.COM/EN-US/MICROSOFT-TEAMS/JOIN-AMEETING- MEETING ID: 993 221 660 694 / PASSCODE: Fp7hA9aq- DIAL IN BY PHONE: +1 503-207-9433 / PHONE CONFERENCE ID: 502 336 420#It is requested that an email be sent to Nicole.M.Batista-Cruz@usace.army.mil and Ruth.C.Rodriguez@usace.army.mil no later than 03 November 2026 at 1:00 PM, EST to confirm attendance by your organization. DESCRIPTION OF WORK: The project work consists of maintenance dredging within Pass-a-Grille Pass as denoted in the drawings. Transport and place excavated material onto the Pass-a- Grille Beach Placement Area, located immediately north of the channel. Incidental work for the project includes but is not limited to MEC construction support, environmental monitoring, water quality monitoring, beach fill quality control, screening, vibration control and monitoring, and beach tilling. The Request for Proposals (RFP) will be issued on or about 20 October 2026 and proposals will be due on or about 20 November 2026. NAICS Code 237990, Dredging and Surface Cleanup Activities. The Small Business Standard is $37 million. The Price Target Range is between $5,000,000.00 and $10,000,0

Information Processing Techniques Office Office-Wide

DEF ADVANCED RESEARCH PROJECTS AGCY

This Broad Agency Announcement (BAA) seeks revolutionary research ideas for topics not being addressed by ongoing IPTO programs or other published solicitations. Potential proposers are highly encouraged to visit the IPTO technical office page (https://www.darpa.mil/about/offices/ipto) to view current and upcoming IPTO programs and solicitations in order to avoid proposing efforts that duplicate existing activities or that are responsive to other published IPTO solicitations.

Construct Concrete Targets

FA2488 AFTC PZZA EGLIN

COMBINED SYNOPSIS/SOLICITATION NOTICE SOLICITATION NUMBER: FA248826RB001 Request for Proposals (RFP) REQUIREMENT TITLE: Construct Concrete Targets. ESTIMATED VALUE: $19,000,000.00. NAICS Code: 238110. Product Service Code: Y1PZ. Small Business Set-Aside. Small Business Size Standard: $19.0M. Contract Type: Firm-Fixed-Price. 1. GENERAL INFORMATION and MANDATORY STATEMENT: This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with RFO Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. This acquisition is being conducted as a Request for Proposals (RFP) under RFO Part 12 (Acquisition of Commercial Products and Commercial Services) and RFO Part 15 (Contracting by Negotiation). The contract award will be a Firm-Fixed-Priced (FFP) Indefinite Delivery/Indefinite Quantity (IDIQ) contract not to exceed five (5) years. The Government intends to award a single contract. Offerors providing less than 60 calendar days for Government acceptance after the proposal due date will not be considered and will be rejected. All contractors MUST be registered and active in the System for Award Management (SAM) in order to receive a contract award. Contractors can obtain further information on the SAM website at https://sam.gov/content/home. By submission of a proposal, the offeror certifies that neither they nor their teaming partners are subject to foreign-ownership or control. RESTRICTION ON PERFORMANCE BY NON-U.S. CITIZENS: Information and materials pursuant to or resulting from this effort may be restricted under the International Traffic in Arms Regulations, 22 C.F.R. Parts 120 and 130 or the Export Administration Regulations, 15 C.F.R. Parts 730 and 774. Non-U.S. citizens / companies may perform work under an unclassified award if they are designated a U.S. Person, as defined by 22 CFR Section 120.62 (lawful permanent resident) or obta

Request for Interested Manufacturers of 6130-01-523-3338 Power Control Module (PCM) and 1095-01-523-5767 High Bandwith Assembly (HBA) for the Bomb Release Unit (BRU)-57

DLA AVIATION AT WARNER ROBINS, GA

SUBJECT Market research is being conducted to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for qualification and production of the Power Control Module (PCM), NSN 6130-01-523-3338, Part Number MT57M1177-1 and High Bandwith Assembly (HBA), NSN 1095-01-523-5767, Part Number MT57M1165-1. ITEM DESCRIPTION The PCM and HBA are components of the BRU-57/A (BRU- Bomb Release Unit) Smart Bomb Rack used on the F-16 Fighter. The PCM serves as the primary electrical power management, conditioning, and distribution hub for the BRU-57/A Smart Bomb Rack system. The HBA is the communication link for the BRU-57 bomb rack. It routes high-speed data between the F-16 and two smart weapons. The BRU-57/A PCM and HBA were developed specifically for use on the F-16 C/D aircraft with military unique requirements. The BRU-57/A is a MIL-STD-1760 capable, multiple-carriage, vertical-ejection Bomb Rack. The BRU-57/A provides side-by-side carriage and release of two 14-inch suspension stores. IMPEDIMENT TO COMPETITION The original equipment manufacturer for this item is L3Harris (CAGE 82340) previously EDO LLC. The Government does not own any data, drawings, schematics, or any other releasable technical data in support of this requirement. As a result, L3Harris is the only known source with adequate knowledge of the BRU-57 performance requirements and possession of the required technical data and capabilities needed to produce these items and ensure compatibility of the equipment. INTEREST The DLA/AWB Contracting Office intends to award a sole source contract to L3 Harris for the manufacture of the BRU-57 PCM and HBA in support of the F-16C/D program. Other interested parties may identify their interest and capability to respond to the requirement no later than 20 October 2026, 1700 EST by emailing robert.berg.9@us.af.mil. The Government intends to procure these items using Other Than Full and Open Competition as prescribed by RF

F16 Aircraft Cover

W7NV USPFO ACTIVITY OKANG 138

Power Construction and Services II (PCS II) MATOC

W2SD ENDIST PHILADELPHIA

***AMENDMENT 0003: The purpose of this amendment is to extend the proposal submission due date to 27 October 2026 4:30 PM ET and provide an update on Requests for Information (RFIs). To view the amendment access the PIEE Solicitation Module Link for W912BU26RA032 below******AMENDMENT 0002: The purpose of this amendment is to provide the Governments consolidated responses to contractor Requests for Information (RFIs), and to distribute the presentation slides and attendee list from the Industry Day held on September 17, 2026. Additionally, Attachment 2 - PCS II MATOC Bid Schedule is revised under the EUCOM Labor Coefficients tab to replace Denmark with Kosovo, as Denmark was previously included in error. To view the amendment and revised documents access the PIEE Solicitation Module Link for W912BU26RA032 below******AMENDMENT 0001: The purpose of this amendment is to incorporate Attachment 10 - 00 74 00 Supplemental Conditions to establish Host Nation compliance requirements for individual orders performed within Turkey, Romania, and Poland. Attachment 7 and Attachment 8 are revised accordingly. Additionally, this amendment corrects various administrative errors and inconsistencies throughout the solicitation. To view the amendment and revised documents access the PIEE Solicitation Module Link for W912BU26RA032 below*** The US Army Corps of Engineers, Philadelphia District (NAP) has issued a Request for Proposal (RFP) for one firm-fixed-price Indefinite Delivery/Indefinite Quantity (IDIQ) Multiple Award Task Order Contract (MATOC) contract to provide power construction and services in contingency or austere environments in support of temporary or enduring requirements of the United States Government (USG); USG Coalition Forces/Organizations; and Host-Nation Governments/Forces/Organizations within the United States Central Command Area of Responsibility (CENTCOM AOR) and select United States European Command (EUCOM) countries to include Ukraine, Poland, Romania, Bulga

DPAA Papua New Guinea Helicopter Requirement

USTRANSCOM-AQ

The United States Transportation Command (USTRANSCOM) is seeking proposals for rotary-wing aviation support services in Papua New Guinea on behalf of the Defense POW/MIA Accounting Agency (DPAA). The requirement demands providing up to three (3) helicopters simultaneously to support up to three (3) remote recovery missions per year (ranging from 14 to 90 days each), including passenger/cargo transport, sling load operations, and 24/7 on-call MEDEVAC. Offerors are advised to thoroughly review the full solicitation package, paying close attention to the instructions and evaluation criteria outlined in the FAR 52.212-1 and FAR 52.212-2 clauses along with the ten (10) attached documents. A virtual Pre-Proposal Conference will be held via MS Teams on Monday, 27 July 2026, at 10:30 AM CST; meeting access details will be posted on SAM.gov prior to the event. Updates: 7/17/2026 Pre-Proposal Conference Agenda - See Uploaded Pre-Proposal Confernece Memo DPAA PDF for deadlines and information. 7/27/2026 Pre-Proposal PowerPoint Slides - Information Brief 8/4/2026 Updated Question and Answers #1, Updated PWS, Updated Attachment 4 with a new Attachment 4a Addendum (Subcontracting) 8/10/2026 Solicitation Amendment 1 - Requires Vendor Signature with RFP See DPAA Amend 1 Vendor Sign Document

St. Cloud VAHCS Hematology-Oncology Provider & RN

NETWORK CONTRACT OFFICE 23 (36C263)

This is the posting of the sources sought for Hematology-Oncology Provider & RN at the St. Cloud VAHCS. See the attached sources sought for details.

50-Day U.S. Jones Act Tanker Time Charter

MSC NORFOLK

Action Code: Presolicitation Date: 05 October 2026 Fiscal Year: 2027 Contracting Office Zip Code: 23511 Product or Service Code: V124 - Transportation/Travel/Relocation - Transportation: Marine Charter Contracting Office Address: 471 East C Street, Naval Station Norfolk, Norfolk, VA 23511 Subject: 50-Day U.S. Jones Act Tanker Time Charter Proposed Solicitation Number: N3220527R6009 Closing Response Date: Friday, 09 October 2026 Contract Point of Contact or Contracting Officer: Tiffany Gallon tiffany.n.gallon.civ@us.navy.mil; 564-226-8986 Contract Award and Solicitation Number: TBD Contract Award Dollar Amount: TBD Contract Line Item Number: N/A Contract Award Date: TBA Contractor: TBD Description: One, clean, approved, U.S. Jones Act, Articulated Tug and Barge (ATB) / Integrated Tug and Barge (ITB) / Non-connected Tug and Barge or double-hull MR Tanker, with an Inert Gas System or equivalent system and Segregated Ballast Tanks that is capable of carrying a minimum of 260,000 bbls of clean product (JP5/F76/JAA) for MR Tankers or 150,000 bbls of clean product (JP5/F76/JAA) for ITB/ATB or Non-Connected Tug and Barge within vessel’s natural segregation in designated cargo tanks. Place of Contract Performance: The place/range of delivery is U.S. West Coast, Range and Port in Charterer’s Option (Intentions Long Beach, CA); and the place/range of redelivery is U.S. West Coast, Range and Port in Charterer’s Option (Intentions Puget Sound, WA). The laydays commence 11 November 2026 and cancel 18 November 2026, and the period of performance will be about 50 days. Set-aside Status: N/A. The decision to release this procurement as “Unrestricted” is based on responses received from a recent, sources sought notice for this service. All responsible sources may submit a proposal, which shall be considered by the agency. The Small Business Administration’s Procurement Center Representative has concurred with this decision.

Maintenance, Repair, and Preservation of YON-322

PUGET SOUND NAVAL SHIPYARD IMF

The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing the maintenance, repair, and preservation of YON-322. Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. YON-322 • Length: 199 FT • Width: 54 FT • Height: 15 FT • Age: 21 YRS • Hull Type: Steel • Draft: 3 FT • Full Displacement: 2,848 L Tons • Light Load: 706 L Tons Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel from Manchester Fuel Depot to the Contractor’s facility. Dock, wash, and clean exterior surfaces of the vessel upon docking. Replace zinc anodes on hull / Skegs. Accomplish preservation to Underwater Hull, Freeboard, Main deck, Deck house, Cargo piping and all deck fittings. Clean non-skid located Main deck, Deck house top and Cargo deck. Remove, clean and install Rubber fenders. Modify existing Piping eliminate Aft Flow Meter and insert spool. Accomplish Ultrasonic test measurement and visual inspection of the hull, Main deck, Cargo deck and Deck house top. Open, Clean, Pump and maintain clean and dry each tank/void. Inspect tanks/voids for defects. Replace Navigational lights with new LED light fixtures. Refresh Exhaust Muffler for Yanmar and Main Engine. Replace Solar Panels. Remove Antenna Support Modification. Perform Storage Locker modifications. Replace Fuel Oil Tank Piping. Replace and Calibrate Cargo Tank Level Indicator’s (TLI’s). Perform Preliminary Air test of Tanks/voids/St

Comprehensive Data Management & Streamlining Solution for Business-Critical Data (Data Stream)

FOOD AND DRUG ADMINISTRATION

This Sources Sought Request for Information (RFI) is for information, planning and market research purposes only and shall not be construed as either a solicitation or obligation on the part of the Food and Drug Administration or its Centers. The purpose of this RFI is to help the FDA understand the technical capabilities for providing the full range of services described in the Statement of Work (SOW) attached at the end. FDA will use this market research information to assess the market's capability to successfully meet the Data Strem requirements. FDA welcomes responses from all interested businesses. FDA does not intend to make a selection decision or award a contract on the basis of responses nor otherwise pay for the preparation of any information submitted or FDA's use of such information. Acknowledgment of receipt of responses will not be made, no questions will be answered, nor will respondents be notified of the outcome of the FDA's review of the information received. Additionally, the FDA does not intend to hold discussions concerning this RFI with any interested parties. However, FDA reserves the right to contact vendors if additional information is required.

USACE MVK's MSU Barge Salvage and Demo

W07V ENDIST VICKSBURG

W912EE - This contract action was not awarded competitively.

Solid Nose Fuze Plug

W6QK ACC-RI

10/05/2026 PIEE Solicitation Module Notification The Government intends to utilize the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module for the posting, dissemination, and receipt of proposals for any subsequent solicitation resulting from this market research. To ensure your organization is prepared to access solicitation documents and submit responses, interested offerors are encouraged to review the PIEE Solicitation Module registration instructions provided as an attachment to this posting. Offerors are advised to complete the registration process prior to any potential solicitation release to avoid delays. This Sources Sought posting closed for responses on 05 December 2025 at 1700 CST. This posting will be inactive as of 09 December 2025. The Army Contracting Command - Rock Island, on behalf of the Project Manager Closed Combat Systems, Picatinny Arsenal, NJ, is issuing a sources sought notice to identify capable sources for the production and delivery of the following items. Solid Nose Fuze Plug (MXU-735) NSN: 1325-01-214-4314 DODIC: FW90 P/N: 923AS148 ITEM DESCRIPTIONS: The following parts are used on various MK80, BLU-110 and BLU-111 series bombs. Solid Nose Fuze Plug (FW90): This one-piece hemispherical solid can nose plug replaces the older two-piece system. It is a steel insert placed in the forward fuzeline of the bomb that aids penetration of hard surfaces and enhances delivery accuracy. The Government anticipates a one-time purchase of approximately 12,000 – 15,000 units. CRITICAL PROCESSES/SKILLS: The manufacture of this item requires skills, which include, but are not limited to: Forging and Heat-Treating Equipment, Machining Equipment (Lathe) An acceptable vendor must be able to display the skills of its employees and established expertise in completing essential operations of manufacturing the Solid Nose Fuze Plug. Respondents to this Sources Sought must have or have the ability to obtain the available skills required to pe